# Copyright 2019-2022 Huawei Technologies Co., Ltd
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
"""
Interpolation Mode, Resampling Filters
"""
from enum import Enum, IntEnum
import numbers
import numpy as np
from PIL import Image
from mindspore import log as logger
import mindspore._c_dataengine as cde
[文档]class AutoAugmentPolicy(str, Enum):
"""
AutoAugment policy for different datasets.
Possible enumeration values are: AutoAugmentPolicy.IMAGENET, AutoAugmentPolicy.CIFAR10,
AutoAugmentPolicy.SVHN.
Each policy contains 25 pairs of augmentation operations. When using AutoAugment, each image is randomly
transformed with one of these operation pairs. Each pair has 2 different operations. The following shows
all of these augmentation operations, including operation names with their probabilities and random params.
- AutoAugmentPolicy.IMAGENET: dataset auto augment policy for ImageNet.
.. code-block::
Augmentation operations pair:
[(("Posterize", 0.4, 8), ("Rotate", 0.6, 9)), (("Solarize", 0.6, 5), ("AutoContrast", 0.6, None)),
(("Equalize", 0.8, None), ("Equalize", 0.6, None)), (("Posterize", 0.6, 7), ("Posterize", 0.6, 6)),
(("Equalize", 0.4, None), ("Solarize", 0.2, 4)), (("Equalize", 0.4, None), ("Rotate", 0.8, 8)),
(("Solarize", 0.6, 3), ("Equalize", 0.6, None)), (("Posterize", 0.8, 5), ("Equalize", 1.0, None)),
(("Rotate", 0.2, 3), ("Solarize", 0.6, 8)), (("Equalize", 0.6, None), ("Posterize", 0.4, 6)),
(("Rotate", 0.8, 8), ("Color", 0.4, 0)), (("Rotate", 0.4, 9), ("Equalize", 0.6, None)),
(("Equalize", 0.0, None), ("Equalize", 0.8, None)), (("Invert", 0.6, None), ("Equalize", 1.0, None)),
(("Color", 0.6, 4), ("Contrast", 1.0, 8)), (("Rotate", 0.8, 8), ("Color", 1.0, 2)),
(("Color", 0.8, 8), ("Solarize", 0.8, 7)), (("Sharpness", 0.4, 7), ("Invert", 0.6, None)),
(("ShearX", 0.6, 5), ("Equalize", 1.0, None)), (("Color", 0.4, 0), ("Equalize", 0.6, None)),
(("Equalize", 0.4, None), ("Solarize", 0.2, 4)), (("Solarize", 0.6, 5), ("AutoContrast", 0.6, None)),
(("Invert", 0.6, None), ("Equalize", 1.0, None)), (("Color", 0.6, 4), ("Contrast", 1.0, 8)),
(("Equalize", 0.8, None), ("Equalize", 0.6, None))]
- AutoAugmentPolicy.CIFAR10: dataset auto augment policy for Cifar10.
.. code-block::
Augmentation operations pair:
[(("Invert", 0.1, None), ("Contrast", 0.2, 6)), (("Rotate", 0.7, 2), ("TranslateX", 0.3, 9)),
(("Sharpness", 0.8, 1), ("Sharpness", 0.9, 3)), (("ShearY", 0.5, 8), ("TranslateY", 0.7, 9)),
(("AutoContrast", 0.5, None), ("Equalize", 0.9, None)), (("ShearY", 0.2, 7), ("Posterize", 0.3, 7)),
(("Color", 0.4, 3), ("Brightness", 0.6, 7)), (("Sharpness", 0.3, 9), ("Brightness", 0.7, 9)),
(("Equalize", 0.6, None), ("Equalize", 0.5, None)), (("Contrast", 0.6, 7), ("Sharpness", 0.6, 5)),
(("Color", 0.7, 7), ("TranslateX", 0.5, 8)), (("Equalize", 0.8, None), ("Invert", 0.1, None)),
(("TranslateY", 0.4, 3), ("Sharpness", 0.2, 6)), (("Brightness", 0.9, 6), ("Color", 0.2, 8)),
(("Solarize", 0.5, 2), ("Invert", 0.0, None)), (("TranslateY", 0.9, 9), ("TranslateY", 0.7, 9)),
(("Equalize", 0.2, None), ("Equalize", 0.6, None)), (("Color", 0.9, 9), ("Equalize", 0.6, None)),
(("AutoContrast", 0.8, None), ("Solarize", 0.2, 8)), (("Brightness", 0.1, 3), ("Color", 0.7, 0)),
(("Solarize", 0.4, 5), ("AutoContrast", 0.9, None)),
(("AutoContrast", 0.9, None), ("Solarize", 0.8, 3)),
(("TranslateY", 0.7, 9), ("AutoContrast", 0.9, None)),
(("Equalize", 0.3, None), ("AutoContrast", 0.4, None)),
(("Equalize", 0.2, None), ("AutoContrast", 0.6, None))]
- AutoAugmentPolicy.SVHN: dataset auto augment policy for SVHN.
.. code-block::
Augmentation operations pair:
[(("ShearX", 0.9, 4), ("Invert", 0.2, None)), (("ShearY", 0.9, 8), ("Invert", 0.7, None)),
(("Equalize", 0.6, None), ("Solarize", 0.6, 6)), (("Invert", 0.9, None), ("Equalize", 0.6, None)),
(("Equalize", 0.6, None), ("Rotate", 0.9, 3)), (("ShearX", 0.9, 4), ("AutoContrast", 0.8, None)),
(("ShearY", 0.9, 8), ("Invert", 0.4, None)), (("ShearY", 0.9, 5), ("Solarize", 0.2, 6)),
(("Invert", 0.9, None), ("AutoContrast", 0.8, None)), (("Equalize", 0.6, None), ("Rotate", 0.9, 3)),
(("ShearX", 0.9, 4), ("Solarize", 0.3, 3)), (("ShearY", 0.8, 8), ("Invert", 0.7, None)),
(("Equalize", 0.9, None), ("TranslateY", 0.6, 6)), (("Invert", 0.9, None), ("Equalize", 0.6, None)),
(("Contrast", 0.3, 3), ("Rotate", 0.8, 4)), (("Invert", 0.8, None), ("TranslateY", 0.0, 2)),
(("ShearY", 0.7, 6), ("Solarize", 0.4, 8)), (("Invert", 0.6, None), ("Rotate", 0.8, 4)),
(("ShearY", 0.3, 7), ("TranslateX", 0.9, 3)), (("ShearX", 0.1, 6), ("Invert", 0.6, None)),
(("Solarize", 0.7, 2), ("TranslateY", 0.6, 7)), (("ShearY", 0.8, 4), ("Invert", 0.8, None)),
(("ShearX", 0.7, 9), ("TranslateY", 0.8, 3)), (("ShearY", 0.8, 5), ("AutoContrast", 0.7, None)),
(("ShearX", 0.7, 2), ("Invert", 0.1, None))]
"""
IMAGENET: str = "imagenet"
CIFAR10: str = "cifar10"
SVHN: str = "svhn"
[文档] @staticmethod
def to_c_type(policy):
"""
Function to return C type for AutoAugment policy.
"""
c_values = {AutoAugmentPolicy.IMAGENET: cde.AutoAugmentPolicy.DE_AUTO_AUGMENT_POLICY_IMAGENET,
AutoAugmentPolicy.CIFAR10: cde.AutoAugmentPolicy.DE_AUTO_AUGMENT_POLICY_CIFAR10,
AutoAugmentPolicy.SVHN: cde.AutoAugmentPolicy.DE_AUTO_AUGMENT_POLICY_SVHN}
return c_values.get(policy)
[文档]class Border(str, Enum):
"""
Padding Mode, Border Type.
Possible enumeration values are: Border.CONSTANT, Border.EDGE, Border.REFLECT, Border.SYMMETRIC.
- Border.CONSTANT: means it fills the border with constant values.
- Border.EDGE: means it pads with the last value on the edge.
- Border.REFLECT: means it reflects the values on the edge omitting the last value of edge.
- Border.SYMMETRIC: means it reflects the values on the edge repeating the last value of edge.
Note:
This class derived from class str to support json serializable.
"""
CONSTANT: str = "constant"
EDGE: str = "edge"
REFLECT: str = "reflect"
SYMMETRIC: str = "symmetric"
@staticmethod
def to_python_type(border_type):
"""
Function to return Python type for Border Type.
"""
python_values = {Border.CONSTANT: 'constant',
Border.EDGE: 'edge',
Border.REFLECT: 'reflect',
Border.SYMMETRIC: 'symmetric'}
return python_values.get(border_type)
@staticmethod
def to_c_type(border_type):
"""
Function to return C type for Border Type.
"""
c_values = {Border.CONSTANT: cde.BorderType.DE_BORDER_CONSTANT,
Border.EDGE: cde.BorderType.DE_BORDER_EDGE,
Border.REFLECT: cde.BorderType.DE_BORDER_REFLECT,
Border.SYMMETRIC: cde.BorderType.DE_BORDER_SYMMETRIC}
return c_values.get(border_type)
[文档]class ConvertMode(IntEnum):
"""
The color conversion mode.
Possible enumeration values are as follows:
- ConvertMode.COLOR_BGR2BGRA: convert BGR format images to BGRA format images.
- ConvertMode.COLOR_RGB2RGBA: convert RGB format images to RGBA format images.
- ConvertMode.COLOR_BGRA2BGR: convert BGRA format images to BGR format images.
- ConvertMode.COLOR_RGBA2RGB: convert RGBA format images to RGB format images.
- ConvertMode.COLOR_BGR2RGBA: convert BGR format images to RGBA format images.
- ConvertMode.COLOR_RGB2BGRA: convert RGB format images to BGRA format images.
- ConvertMode.COLOR_RGBA2BGR: convert RGBA format images to BGR format images.
- ConvertMode.COLOR_BGRA2RGB: convert BGRA format images to RGB format images.
- ConvertMode.COLOR_BGR2RGB: convert BGR format images to RGB format images.
- ConvertMode.COLOR_RGB2BGR: convert RGB format images to BGR format images.
- ConvertMode.COLOR_BGRA2RGBA: convert BGRA format images to RGBA format images.
- ConvertMode.COLOR_RGBA2BGRA: convert RGBA format images to BGRA format images.
- ConvertMode.COLOR_BGR2GRAY: convert BGR format images to GRAY format images.
- ConvertMode.COLOR_RGB2GRAY: convert RGB format images to GRAY format images.
- ConvertMode.COLOR_GRAY2BGR: convert GRAY format images to BGR format images.
- ConvertMode.COLOR_GRAY2RGB: convert GRAY format images to RGB format images.
- ConvertMode.COLOR_GRAY2BGRA: convert GRAY format images to BGRA format images.
- ConvertMode.COLOR_GRAY2RGBA: convert GRAY format images to RGBA format images.
- ConvertMode.COLOR_BGRA2GRAY: convert BGRA format images to GRAY format images.
- ConvertMode.COLOR_RGBA2GRAY: convert RGBA format images to GRAY format images.
"""
COLOR_BGR2BGRA = 0
COLOR_RGB2RGBA = COLOR_BGR2BGRA
COLOR_BGRA2BGR = 1
COLOR_RGBA2RGB = COLOR_BGRA2BGR
COLOR_BGR2RGBA = 2
COLOR_RGB2BGRA = COLOR_BGR2RGBA
COLOR_RGBA2BGR = 3
COLOR_BGRA2RGB = COLOR_RGBA2BGR
COLOR_BGR2RGB = 4
COLOR_RGB2BGR = COLOR_BGR2RGB
COLOR_BGRA2RGBA = 5
COLOR_RGBA2BGRA = COLOR_BGRA2RGBA
COLOR_BGR2GRAY = 6
COLOR_RGB2GRAY = 7
COLOR_GRAY2BGR = 8
COLOR_GRAY2RGB = COLOR_GRAY2BGR
COLOR_GRAY2BGRA = 9
COLOR_GRAY2RGBA = COLOR_GRAY2BGRA
COLOR_BGRA2GRAY = 10
COLOR_RGBA2GRAY = 11
@staticmethod
def to_c_type(mode):
"""
Function to return C type for color mode.
"""
c_values = {ConvertMode.COLOR_BGR2BGRA: cde.ConvertMode.DE_COLOR_BGR2BGRA,
ConvertMode.COLOR_RGB2RGBA: cde.ConvertMode.DE_COLOR_RGB2RGBA,
ConvertMode.COLOR_BGRA2BGR: cde.ConvertMode.DE_COLOR_BGRA2BGR,
ConvertMode.COLOR_RGBA2RGB: cde.ConvertMode.DE_COLOR_RGBA2RGB,
ConvertMode.COLOR_BGR2RGBA: cde.ConvertMode.DE_COLOR_BGR2RGBA,
ConvertMode.COLOR_RGB2BGRA: cde.ConvertMode.DE_COLOR_RGB2BGRA,
ConvertMode.COLOR_RGBA2BGR: cde.ConvertMode.DE_COLOR_RGBA2BGR,
ConvertMode.COLOR_BGRA2RGB: cde.ConvertMode.DE_COLOR_BGRA2RGB,
ConvertMode.COLOR_BGR2RGB: cde.ConvertMode.DE_COLOR_BGR2RGB,
ConvertMode.COLOR_RGB2BGR: cde.ConvertMode.DE_COLOR_RGB2BGR,
ConvertMode.COLOR_BGRA2RGBA: cde.ConvertMode.DE_COLOR_BGRA2RGBA,
ConvertMode.COLOR_RGBA2BGRA: cde.ConvertMode.DE_COLOR_RGBA2BGRA,
ConvertMode.COLOR_BGR2GRAY: cde.ConvertMode.DE_COLOR_BGR2GRAY,
ConvertMode.COLOR_RGB2GRAY: cde.ConvertMode.DE_COLOR_RGB2GRAY,
ConvertMode.COLOR_GRAY2BGR: cde.ConvertMode.DE_COLOR_GRAY2BGR,
ConvertMode.COLOR_GRAY2RGB: cde.ConvertMode.DE_COLOR_GRAY2RGB,
ConvertMode.COLOR_GRAY2BGRA: cde.ConvertMode.DE_COLOR_GRAY2BGRA,
ConvertMode.COLOR_GRAY2RGBA: cde.ConvertMode.DE_COLOR_GRAY2RGBA,
ConvertMode.COLOR_BGRA2GRAY: cde.ConvertMode.DE_COLOR_BGRA2GRAY,
ConvertMode.COLOR_RGBA2GRAY: cde.ConvertMode.DE_COLOR_RGBA2GRAY,
}
return c_values.get(mode)
[文档]class Inter(IntEnum):
"""
Interpolation Modes.
Possible enumeration values are: Inter.NEAREST, Inter.ANTIALIAS, Inter.LINEAR, Inter.BILINEAR, Inter.CUBIC,
Inter.BICUBIC, Inter.AREA, Inter.PILCUBIC.
- Inter.NEAREST: means interpolation method is nearest-neighbor interpolation.
- Inter.ANTIALIAS: means the interpolation method is antialias interpolation.
- Inter.LINEAR: means interpolation method is bilinear interpolation, here is the same as Inter.BILINEAR.
- Inter.BILINEAR: means interpolation method is bilinear interpolation.
- Inter.CUBIC: means the interpolation method is bicubic interpolation, here is the same as Inter.BICUBIC.
- Inter.BICUBIC: means the interpolation method is bicubic interpolation.
- Inter.AREA: means interpolation method is pixel area interpolation.
- Inter.PILCUBIC: means interpolation method is bicubic interpolation like implemented in pillow, input
should be in 3 channels format.
"""
NEAREST = 0
ANTIALIAS = 1
BILINEAR = LINEAR = 2
BICUBIC = CUBIC = 3
AREA = 4
PILCUBIC = 5
@staticmethod
def to_python_type(inter_type):
"""
Function to return Python type for Interpolation Mode.
"""
if Image.__version__ >= "9.1.0":
python_values = {Inter.NEAREST: Image.Resampling.NEAREST,
Inter.ANTIALIAS: Image.Resampling.LANCZOS,
Inter.LINEAR: Image.Resampling.BILINEAR,
Inter.CUBIC: Image.Resampling.BICUBIC}
else:
python_values = {Inter.NEAREST: Image.NEAREST,
Inter.ANTIALIAS: Image.ANTIALIAS,
Inter.LINEAR: Image.LINEAR,
Inter.CUBIC: Image.CUBIC}
return python_values.get(inter_type)
@staticmethod
def to_c_type(inter_type):
"""
Function to return C type for Interpolation Mode.
"""
c_values = {Inter.NEAREST: cde.InterpolationMode.DE_INTER_NEAREST_NEIGHBOUR,
Inter.LINEAR: cde.InterpolationMode.DE_INTER_LINEAR,
Inter.CUBIC: cde.InterpolationMode.DE_INTER_CUBIC,
Inter.AREA: cde.InterpolationMode.DE_INTER_AREA,
Inter.PILCUBIC: cde.InterpolationMode.DE_INTER_PILCUBIC}
return c_values.get(inter_type)
[文档]class SliceMode(IntEnum):
"""
Mode to Slice Tensor into multiple parts.
Possible enumeration values are: SliceMode.PAD, SliceMode.DROP.
- SliceMode.PAD: pad some pixels before slice the Tensor if needed.
- SliceMode.DROP: drop remainder pixels before slice the Tensor if needed.
"""
PAD = 0
DROP = 1
@staticmethod
def to_c_type(mode):
"""
Function to return C type for SliceMode.
"""
c_values = {SliceMode.PAD: cde.SliceMode.DE_SLICE_PAD,
SliceMode.DROP: cde.SliceMode.DE_SLICE_DROP}
return c_values.get(mode)
[文档]def get_image_num_channels(image):
"""
Get the number of input image channels.
Args:
image (Union[numpy.ndarray, PIL.Image.Image]): Image to get the number of channels.
Returns:
int, the number of input image channels.
Examples:
>>> num_channels = vision.get_image_num_channels(image)
"""
if isinstance(image, np.ndarray):
return cde.get_image_num_channels(cde.Tensor(image))
if isinstance(image, Image.Image):
if hasattr(image, "getbands"):
return len(image.getbands())
return image.channels
raise TypeError("Input image is not of type {0} or {1}, but got: {2}.".format(np.ndarray, Image.Image, type(image)))
[文档]def get_image_size(image):
"""
Get the size of input image as [height, width].
Args:
image (Union[numpy.ndarray, PIL.Image.Image]): The image to get size.
Returns:
list[int, int], the image size.
Examples:
>>> image_size = vision.get_image_size(image)
"""
if isinstance(image, np.ndarray):
return cde.get_image_size(cde.Tensor(image))
if isinstance(image, Image.Image):
size_list = list(image.size)
size_list[0], size_list[1] = size_list[1], size_list[0]
return size_list
raise TypeError("Input image is not of type {0} or {1}, but got: {2}.".format(np.ndarray, Image.Image, type(image)))
def parse_padding(padding):
""" Parses and prepares the padding tuple"""
if isinstance(padding, numbers.Number):
padding = [padding] * 4
if len(padding) == 2:
logger.warning("The behavior when `padding` is a sequence of length 2 will change from padding left/top "
"with the first value and right/bottom with the second, to padding left/right with the "
"first one and top/bottom with the second in the future. Or you can pass in a 4-element "
"sequence to specify left, top, right and bottom respectively.")
left = top = padding[0]
right = bottom = padding[1]
padding = (left, top, right, bottom,)
if isinstance(padding, list):
padding = tuple(padding)
return padding