# coding: utf-8
# Copyright 2020-2021 Huawei Technologies Co., Ltd
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# ============================================================================
"""Operators for array."""
import copy
import functools
import itertools
import numbers
import numpy as np
from mindspore import log as logger
from mindspore.common.initializer import Zero
from .._utils import get_broadcast_shape
from .._utils import get_concat_offset
from ..operations.math_ops import _infer_shape_reduce
from ..primitive import Primitive, PrimitiveWithInfer, PrimitiveWithCheck, prim_attr_register, _run_op
from .. import signature as sig
from ..._checkparam import Rel
from ..._checkparam import Validator as validator
from ...common import dtype as mstype
from ...common._decorator import deprecated
from ...common.parameter import Parameter
from ...common.tensor import Tensor
class _ScatterOp(PrimitiveWithInfer):
"""
Defines Scatter operators
"""
__mindspore_signature__ = (
sig.make_sig('x', sig.sig_rw.RW_WRITE, dtype=sig.sig_dtype.T),
sig.make_sig('indices', dtype=sig.sig_dtype.T1),
sig.make_sig('updates', dtype=sig.sig_dtype.T)
)
def _check_scatter_shape(self, x_shape, indices_shape, updates_shape, prim_name):
if indices_shape != [-1] and updates_shape and updates_shape != indices_shape + x_shape[1:]:
raise ValueError(f"For '{prim_name}', "
f"updates_shape = indices_shape + x_shape[1:], but got x_shape: {x_shape}, "
f"indices_shape: {indices_shape}, updates_shape: {updates_shape}.")
@prim_attr_register
def __init__(self, use_locking=False):
"""Initialize _ScatterOp"""
validator.check_value_type('use_locking', use_locking, [bool], self.name)
self.init_prim_io_names(inputs=['x', 'indices', 'updates'], outputs=['y'])
self.add_prim_attr('side_effect_mem', True)
def infer_shape(self, x_shape, indices_shape, updates_shape):
self._check_scatter_shape(x_shape, indices_shape, updates_shape, self.name)
return x_shape
def infer_dtype(self, x_dtype, indices_dtype, updates_dtype):
validator.check_tensor_dtype_valid('indices', indices_dtype, [mstype.int32], self.name)
args = {"x": x_dtype, "updates": updates_dtype}
validator.check_tensors_dtypes_same_and_valid(args, mstype.number_type, self.name)
return x_dtype
class _ScatterOpDynamic(PrimitiveWithCheck):
"""
Defines Scatter operators with dynamic shape
"""
__mindspore_signature__ = (
sig.make_sig('x', sig.sig_rw.RW_WRITE, dtype=sig.sig_dtype.T),
sig.make_sig('indices', dtype=sig.sig_dtype.T1),
sig.make_sig('updates', dtype=sig.sig_dtype.T)
)
def _check_scatter_shape(self, x_shape, indices_shape, updates_shape, prim_name):
# x_shape cannot be dynamic
if np.any(np.array(x_shape) == -1):
raise ValueError(f"x does not support dynamic shape")
# support indices and updates dynamic
if np.any(np.array(indices_shape) == -1) or np.any(np.array(updates_shape) == -1):
pass
elif indices_shape != [-1] and updates_shape and updates_shape != indices_shape + x_shape[1:]:
raise ValueError(f"For '{prim_name}', "
f"updates_shape = indices_shape + x_shape[1:], but got x_shape: {x_shape}, "
f"indices_shape: {indices_shape}, updates_shape: {updates_shape}.")
@prim_attr_register
def __init__(self, use_locking=False):
"""Initialize _ScatterOpDynamic"""
validator.check_value_type('use_locking', use_locking, [bool], self.name)
self.init_prim_io_names(inputs=['x', 'indices', 'updates'], outputs=['y'])
self.add_prim_attr('side_effect_mem', True)
def check_shape(self, x_shape, indices_shape, updates_shape):
self._check_scatter_shape(x_shape, indices_shape, updates_shape, self.name)
def check_dtype(self, x_dtype, indices_dtype, updates_dtype):
validator.check_tensor_dtype_valid('indices', indices_dtype, [mstype.int32], self.name)
args = {"x": x_dtype, "updates": updates_dtype}
validator.check_tensors_dtypes_same_and_valid(args, mstype.number_type, self.name)
class _ScatterNdOp(_ScatterOp):
"""
Defines _ScatterNd operators
"""
def _check_scatter_shape(self, x_shape, indices_shape, updates_shape, prim_name):
validator.check('the dimension of x', len(x_shape),
'the dimension of indices', indices_shape[-1], Rel.GE)
if indices_shape[:-1] + x_shape[indices_shape[-1]:] != updates_shape:
raise ValueError(f"For '{prim_name}', updates_shape = "
f"indices_shape[:-1] + x_shape[indices_shape[-1]:], but got x_shape: {x_shape}, "
f"indices_shape: {indices_shape}, updates_shape: {updates_shape}.")
def _check_infer_attr_reduce(axis, keep_dims, prim_name):
validator.check_value_type('keep_dims', keep_dims, [bool], prim_name)
validator.check_value_type('axis', axis, [int, tuple], prim_name)
if isinstance(axis, tuple):
for index, value in enumerate(axis):
validator.check_value_type('axis[%d]' % index, value, [int], prim_name)
[docs]class ExpandDims(PrimitiveWithInfer):
"""
Adds an additional dimension at the given axis.
Note:
If the specified axis is a negative number, the index is counted
backward from the end and starts at 1.
Inputs:
- **input_x** (Tensor) - The shape of tensor is :math:`(x_1, x_2, ..., x_R)`.
- **axis** (int) - Specifies the dimension index at which to expand
the shape of `input_x`. The value of axis must be in the range
`[-input_x.ndim-1, input_x.ndim]`. Only constant value is allowed.
Outputs:
Tensor, the shape of tensor is :math:`(1, x_1, x_2, ..., x_R)` if the
value of `axis` is 0. It has the same type as `input_x`.
Raises:
ValueError: If `axis` is not an int or not in the valid range.
Supported Platforms:
``Ascend`` ``GPU`` ``CPU``
Examples:
>>> input_tensor = Tensor(np.array([[2, 2], [2, 2]]), mindspore.float32)
>>> expand_dims = ops.ExpandDims()
>>> output = expand_dims(input_tensor, 0)
>>> print(output)
[[[2. 2.]
[2. 2.]]]
"""
@prim_attr_register
def __init__(self):
"""Initialize ExpandDims"""
self.init_prim_io_names(inputs=['x', 'axis'], outputs=['output'])
def __infer__(self, x, axis):
validator.check_subclass("x", x['dtype'], mstype.tensor, self.name)
x_shape = list(x['shape'])
axis_v = axis['value']
rank = len(x_shape)
validator.check_int_range(axis_v, -rank - 1, rank, Rel.INC_BOTH, 'axis', self.name)
value = None
if x['value'] is not None:
value = x['value'].asnumpy()
value = np.expand_dims(value, axis_v)
value = Tensor(value)
if axis_v < 0:
axis_v = rank + 1 + axis_v
x_shape.insert(axis_v, 1)
out = {'shape': x_shape,
'dtype': x['dtype'],
'value': value}
if 'min_shape' in x and 'max_shape' in x:
out['min_shape'] = x['min_shape']
out['min_shape'].insert(axis_v, 1)
out['max_shape'] = x['max_shape']
out['max_shape'].insert(axis_v, 1)
return out
[docs]class DType(PrimitiveWithInfer):
"""
Returns the data type of the input tensor as mindspore.dtype.
Inputs:
- **input_x** (Tensor) - The shape of tensor is :math:`(x_1, x_2, ..., x_R)`.
Outputs:
mindspore.dtype, the data type of a tensor.
Raises:
TypeError: If `input_x` is not a Tensor.
Supported Platforms:
``Ascend`` ``GPU`` ``CPU``
Examples:
>>> input_tensor = Tensor(np.array([[2, 2], [2, 2]]), mindspore.float32)
>>> output = ops.DType()(input_tensor)
>>> print(output)
Float32
"""
@prim_attr_register
def __init__(self):
"""Initialize DType"""
def __infer__(self, x):
addition_error_info = 'Perhaps you are using a mixture of tensors and scalars to operate.'
validator.check_subclass("input_x", x['dtype'], mstype.tensor, self.name, addition_error_info)
out = {'shape': (),
'dtype': mstype.type_type,
'value': x['dtype'].element_type()}
return out
[docs]class SameTypeShape(PrimitiveWithInfer):
"""
Checks whether the data type and shape of two tensors are the same.
Inputs:
- **input_x** (Tensor) - The shape of tensor is :math:`(x_1, x_2, ..., x_R)`.
- **input_y** (Tensor) - The shape of tensor is :math:`(x_1, x_2, ..., x_S)`.
Outputs:
Tensor, the shape of tensor is :math:`(x_1, x_2, ..., x_R)`,
if data type and shape of `input_x` and `input_y` are the same.
Raises:
TypeError: If the data types of `input_x` and `input_y` are not the same.
ValueError: If the shapes of `input_x` and `input_y` are not the same.
Supported Platforms:
``Ascend`` ``GPU`` ``CPU``
Examples:
>>> input_x = Tensor(np.array([[2, 2], [2, 2]]), mindspore.float32)
>>> input_y = Tensor(np.array([[2, 2], [2, 2]]), mindspore.float32)
>>> output = ops.SameTypeShape()(input_x, input_y)
>>> print(output)
[[2. 2.]
[2. 2.]]
"""
@prim_attr_register
def __init__(self):
"""Initialize Same"""
def __call__(self, x, y):
"""run in PyNative mode"""
validator.check_value_type('x', x, Tensor, self.name)
validator.check_value_type('y', y, Tensor, self.name)
validator.check('x dtype', x.dtype, 'y dtype', y.dtype, Rel.EQ, self.name, TypeError)
validator.check('x shape', x.shape, 'y shape', y.shape, Rel.EQ, self.name)
return x
def __infer__(self, x, y):
validator.check_subclass('x', x['dtype'], mstype.tensor, self.name)
validator.check_subclass('y', y['dtype'], mstype.tensor, self.name)
validator.check('x dtype', x['dtype'], 'y dtype', y['dtype'], Rel.EQ, self.name, TypeError)
validator.check('x shape', x['shape'], 'y shape', y['shape'], Rel.EQ, self.name)
return x
[docs]class Cast(PrimitiveWithInfer):
"""
Returns a tensor with the new specified data type.
Inputs:
- **input_x** (Union[Tensor, Number]) - The shape of tensor is :math:`(x_1, x_2, ..., x_R)`.
The tensor to be cast.
- **type** (dtype.Number) - The valid data type of the output tensor. Only constant value is allowed.
Outputs:
Tensor, the shape of tensor is the same as `input_x`, :math:`(x_1, x_2, ..., x_R)`.
Raises:
TypeError: If `input_x` is neither Tensor nor Number.
TypeError: If `type` is not a Number.
Supported Platforms:
``Ascend`` ``GPU`` ``CPU``
Examples:
>>> input_np = np.random.randn(2, 3, 4, 5).astype(np.float32)
>>> input_x = Tensor(input_np)
>>> type_dst = mindspore.int32
>>> cast = ops.Cast()
>>> output = cast(input_x, type_dst)
>>> print(output.dtype)
Int32
>>> print(output.shape)
(2, 3, 4, 5)
"""
@prim_attr_register
def __init__(self):
# if primitive need setattr in __infer__ need add this flag
"""Initialize Cast"""
self.init_prim_io_names(inputs=['x', 'dst_type'], outputs=['output'])
def check_elim(self, x, dtype):
if isinstance(x, (Tensor, numbers.Number, Parameter)):
if isinstance(x, Parameter):
data = x.data
if data.dtype == dtype:
return (True, x)
if isinstance(x, Tensor) and x.dtype == dtype:
x = Tensor(x)
x.set_cast_dtype()
return (True, x)
if isinstance(x, numbers.Number):
return (True, Tensor(x, dtype=dtype))
return (False, None)
def __infer__(self, x, t):
src_type = x['dtype']
dst_type = t['value']
validator.check_subclass("input_x", src_type, [mstype.tensor, mstype.number], self.name)
validator.check_subclass("type", dst_type, mstype.number, self.name)
if isinstance(src_type, type(mstype.tensor)):
src_type = x['dtype'].element_type()
if isinstance(dst_type, type(mstype.tensor)):
dst_type = dst_type.element_type()
self.add_prim_attr('DstT', dst_type)
self.add_prim_attr('SrcT', src_type)
self.add_prim_attr('dst_type', dst_type)
value = None
if x['value'] is not None:
np_dst_type = mstype.dtype_to_nptype(dst_type)
if isinstance(x['value'], (int, float)):
value = Tensor(np.array(x['value']).astype(np_dst_type))
else:
value = Tensor(x['value'].asnumpy().astype(np_dst_type))
out = {'shape': x['shape'],
'dtype': mstype.tensor_type(t['value']),
'value': value}
if 'min_shape' in x and 'max_shape' in x:
out['min_shape'] = x['min_shape']
out['max_shape'] = x['max_shape']
return out
[docs]class IsSubClass(PrimitiveWithInfer):
"""
Checks whether this type is a sub-class of another type.
Inputs:
- **sub_type** (mindspore.dtype) - The type to be checked. Only constant value is allowed.
- **type_** (mindspore.dtype) - The target type. Only constant value is allowed.
Outputs:
bool, the check result.
Raises:
TypeError: If `sub_type` or `type_` is not a Type.
Supported Platforms:
``Ascend`` ``GPU`` ``CPU``
Examples:
>>> output = ops.IsSubClass()(mindspore.int32, mindspore.intc)
>>> print(output)
True
"""
@prim_attr_register
def __init__(self):
pass
def __infer__(self, sub_type, type_):
sub_type_t = sub_type['value']
type_v = type_['value']
validator.check_value_type("sub_type", sub_type_t, [mstype.Type], self.name)
validator.check_value_type("type_", type_v, [mstype.Type], self.name)
value = mstype.issubclass_(sub_type_t, type_v)
out = {'shape': (),
'dtype': mstype.type_type,
'value': value}
return out
[docs]class IsInstance(PrimitiveWithInfer):
"""
Checks whether an object is an instance of a target type.
Inputs:
- **inst** (Any Object) - The instance to be checked. Only constant value is allowed.
- **type_** (mindspore.dtype) - The target type. Only constant value is allowed.
Outputs:
bool, the check result.
Raises:
TypeError: If `type_` is not a Type.
Supported Platforms:
``Ascend`` ``GPU`` ``CPU``
Examples:
>>> a = 1
>>> output = ops.IsInstance()(a, mindspore.int32)
>>> print(output)
False
"""
@prim_attr_register
def __init__(self):
pass
def __infer__(self, inst, type_):
sub_type_t = inst['dtype']
type_v = type_['value']
validator.check_value_type("type_", type_v, [mstype.Type], self.name)
if type_v == mstype.list_:
value = isinstance(sub_type_t, list)
elif type_v == mstype.tuple_:
value = isinstance(sub_type_t, tuple)
else:
value = mstype.issubclass_(sub_type_t, type_v)
out = {'shape': (),
'dtype': mstype.type_type,
'value': value}
return out
[docs]class Reshape(PrimitiveWithInfer):
"""
Reshapes the input tensor with the same values based on a given shape tuple.
Inputs:
- **input_x** (Tensor) - The shape of tensor is :math:`(x_1, x_2, ..., x_R)`.
- **input_shape** (tuple[int]) - The input tuple is constructed by multiple
integers, i.e., :math:`(y_1, y_2, ..., y_S)`. Only constant value is allowed.
Outputs:
Tensor, the shape of tensor is :math:`(y_1, y_2, ..., y_S)`.
Raises:
ValueError: Given a shape tuple, if it has several -1; or if the product
of its elements is less than or equal to 0 or cannot be divided by the product
of the input tensor shape; or if it does not match the input's array size.
Supported Platforms:
``Ascend`` ``GPU`` ``CPU``
Examples:
>>> input_tensor = Tensor(np.array([[-0.1, 0.3, 3.6], [0.4, 0.5, -3.2]]), mindspore.float32)
>>> reshape = ops.Reshape()
>>> output = reshape(input_tensor, (3, 2))
>>> print(output)
[[-0.1 0.3]
[ 3.6 0.4]
[ 0.5 -3.2]]
"""
@prim_attr_register
def __init__(self):
"""Initialize Reshape"""
self.init_prim_io_names(inputs=['tensor', 'shape'], outputs=['output'])
def __infer__(self, x, shape):
shape_v = shape['value']
x_shp = x['shape']
validator.check_subclass("x", x['dtype'], mstype.tensor, self.name)
validator.check_value_type("shape", shape_v, [tuple], self.name)
shape_v = list(shape_v)
neg_index = -1
dim_prod = 1
for i, shp_i in enumerate(shape_v):
validator.check_value_type("shape[%d]" % i, shp_i, [int], self.name)
if shp_i == -1:
if neg_index != -1:
raise ValueError(f'The shape can only has one -1 at most, but {shape_v}.')
neg_index = i
else:
dim_prod *= shp_i
arr_prod = np.prod(x_shp)
if arr_prod <= 0:
if 'max_shape' in x:
x_max_shape = x['max_shape']
else:
x_max_shape = x['shape']
if 'min_shape' in x:
x_min_shape = x['min_shape']
else:
x_min_shape = x['shape']
max_arr_prod = np.prod(x_max_shape)
min_arr_prod = np.prod(x_min_shape)
max_shape = list(shape_v)
min_shape = list(shape_v)
if neg_index != -1:
max_shape[neg_index] = int(max_arr_prod / dim_prod)
min_shape[neg_index] = int(min_arr_prod / dim_prod)
else:
raise ValueError(f'For dynamic shape, Reshape must have neg index')
out = {'shape': shape['value'],
'dtype': x['dtype'],
'value': None,
'max_shape': tuple(max_shape),
'min_shape': tuple(min_shape)}
else:
if dim_prod <= 0 or arr_prod % dim_prod != 0:
raise ValueError(f'For \'{self.name}\' input_x\'s shape is {x_shp}, input_shape\'s value is {shape_v}.'
f'The product of input_x\'s shape should > 0, '
f'and can be divided by product of input_shape, but '
f'product of input_x\'s shape is {arr_prod}, product of input_shape is {dim_prod}.')
if neg_index != -1:
shape_v[neg_index] = int(arr_prod / dim_prod)
dim_prod *= shape_v[neg_index]
if dim_prod != arr_prod:
raise ValueError(f'For \'{self.name}\' input_x\'s shape is {x_shp}, input_shape\'s value is {shape_v}.'
f'The product of input_x\'s shape should be equal to product of input_shape, but '
f'product of input_x\'s shape is {arr_prod}, product of input_shape is {dim_prod}.')
value = None
if x['value'] is not None:
value = Tensor(x['value'].asnumpy().reshape(shape_v))
out = {'shape': tuple(shape_v),
'dtype': x['dtype'],
'value': value}
return out
[docs]class Shape(PrimitiveWithInfer):
"""
Returns the shape of the input tensor.
Inputs:
- **input_x** (Tensor) - The shape of tensor is :math:`(x_1, x_2, ..., x_R)`.
Outputs:
tuple[int], the output tuple is constructed by multiple integers,
:math:`(x_1, x_2, ..., x_R)`.
Raises:
TypeError: If `input_x` is not a Tensor.
Supported Platforms:
``Ascend`` ``GPU`` ``CPU``
Examples:
>>> input_tensor = Tensor(np.ones(shape=[3, 2, 1]), mindspore.float32)
>>> shape = ops.Shape()
>>> output = shape(input_tensor)
>>> print(output)
(3, 2, 1)
"""
@prim_attr_register
def __init__(self):
"""Initialize Shape"""
def __infer__(self, x):
validator.check_subclass("input_x", x['dtype'], mstype.tensor, self.name)
out = {'shape': (),
'dtype': mstype.tuple_,
'value': tuple(x['shape'])}
return out
[docs]class DynamicShape(Primitive):
"""
Returns the shape of the input tensor.
Inputs:
- **input_x** (Tensor) - The shape of tensor is :math:`(x_1, x_2, ..., x_R)`.
Outputs:
Tensor[int], 1-dim Tensor of type int32
Raises:
TypeError: If `input_x` is not a Tensor.
Supported Platforms:
``Ascend`` ``GPU`` ``CPU``
Examples:
>>> input_tensor = Tensor(np.ones(shape=[3, 2, 1]), mindspore.float32)
>>> shape = ops.DynamicShape()
>>> output = shape(input_tensor)
>>> print(output)
[3 2 1]
"""
@prim_attr_register
def __init__(self):
"""init Shape"""
self.init_prim_io_names(inputs=['tensor'], outputs=['output'])
self.add_prim_attr('is_dynamic_shape', True)
[docs]class Squeeze(PrimitiveWithInfer):
"""
Returns a tensor with the same type but dimensions of 1 are removed based on `axis`.
If `axis` is specified, it will remove the dimensions of size 1 in the given `axis`.
It `axis` is None, it will remove all the dimensions of size 1.
Note:
The dimension index starts at 0 and must be in the range `[-input.ndim, input.ndim]`.
Args:
axis (Union[int, tuple(int)]): Specifies the dimension indexes of shape to be removed, which will remove
all the dimensions that are equal to 1. If specified, it must be int32 or int64.
Default: (), an empty tuple.
Inputs:
- **input_x** (Tensor) - The shape of tensor is :math:`(x_1, x_2, ..., x_R)`.
Outputs:
Tensor, the shape of tensor is :math:`(x_1, x_2, ..., x_S)`.
Raises:
TypeError: If `axis` is neither an int nor tuple.
TypeError: If `axis` is a tuple whose elements are not all int.
ValueError: If the corresponding dimension of the specified axis does not equal to 1.
Supported Platforms:
``Ascend`` ``GPU`` ``CPU``
Examples:
>>> input_tensor = Tensor(np.ones(shape=[3, 2, 1]), mindspore.float32)
>>> squeeze = ops.Squeeze(2)
>>> output = squeeze(input_tensor)
>>> print(output)
[[1. 1.]
[1. 1.]
[1. 1.]]
"""
@prim_attr_register
def __init__(self, axis=()):
"""Initialize Squeeze"""
self.init_prim_io_names(inputs=['x'], outputs=['output'])
validator.check_value_type('axis', axis, [int, tuple], self.name)
if isinstance(axis, tuple):
for idx, item in enumerate(axis):
validator.check_value_type("axis[%d]" % idx, item, [int], self.name)
else:
self.axis = (axis,)
self.add_prim_attr("axis", (axis,))
def infer_shape(self, x_shape):
axis = self.axis
x_shape = list(x_shape)
ndim = len(x_shape)
if not axis:
ret = [d for d in x_shape if d != 1]
else:
for a in axis:
validator.check_int_range(a, -ndim, ndim - 1, Rel.INC_BOTH, 'axis or its elements', self.name)
if x_shape[a] != 1:
raise ValueError('Cannot select an axis to squeeze out which has size not equal to one.')
ret = [x_shape[i] for i in range(ndim) if not (i in axis or (i - ndim) in axis)]
return ret
def infer_dtype(self, x_dtype):
validator.check_subclass("x", x_dtype, mstype.tensor, self.name)
return x_dtype
[docs]class Transpose(PrimitiveWithInfer):
"""
Permutes the dimensions of the input tensor according to input permutation.
Inputs:
- **input_x** (Tensor) - The shape of tensor is :math:`(x_1, x_2, ..., x_R)`.
- **input_perm** (tuple[int]) - The permutation to be converted. The input tuple is constructed by multiple
indexes. The length of `input_perm` and the shape of `input_x` must be the same. Only constant value is
allowed. Must be in the range [0, rank(input_x)).
Outputs:
Tensor, the type of output tensor is the same as `input_x` and the shape of output tensor is decided by the
shape of `input_x` and the value of `input_perm`.
Raises:
TypeError: If `input_perm` is not a tuple.
ValueError: If length of shape of `input_x` is not equal to length of shape of `input_perm`.
Supported Platforms:
``Ascend`` ``GPU`` ``CPU``
Examples:
>>> input_tensor = Tensor(np.array([[[1, 2, 3], [4, 5, 6]], [[7, 8, 9], [10, 11, 12]]]), mindspore.float32)
>>> perm = (0, 2, 1)
>>> transpose = ops.Transpose()
>>> output = transpose(input_tensor, perm)
>>> print(output)
[[[ 1. 4.]
[ 2. 5.]
[ 3. 6.]]
[[ 7. 10.]
[ 8. 11.]
[ 9. 12.]]]
"""
@prim_attr_register
def __init__(self):
"""Initialize Transpose"""
self.init_prim_io_names(inputs=['x', 'perm'], outputs=['output'])
def __infer__(self, x, perm):
x_shape = x['shape']
p_value = perm['value']
x_type = x['dtype']
validator.check_value_type("p_value", p_value, [tuple], self.name)
validator.check_subclass("x_type", x_type, mstype.tensor, self.name)
if len(x_shape) != len(p_value):
raise ValueError('The dimension of x and perm must be equal.')
tmp = list(p_value)
for i, dim in enumerate(p_value):
validator.check_int(dim, 0, Rel.GE, f'perm[{i}]', self.name)
validator.check_int(dim, len(p_value), Rel.LT, f'perm[{i}]', self.name)
tmp.remove(dim)
if dim in tmp:
raise ValueError('The value of perm is wrong.')
out_shapes = []
for i in p_value:
out_shapes.append(x_shape[i])
out = {'shape': tuple(out_shapes),
'dtype': x['dtype'],
'value': None}
if 'min_shape' in x and 'max_shape' in x:
min_vec = []
max_vec = []
for i in p_value:
min_vec.append(x['min_shape'][i])
max_vec.append(x['max_shape'][i])
out['min_shape'] = tuple(min_vec)
out['max_shape'] = tuple(max_vec)
return out
[docs]class Unique(Primitive):
"""
Returns the unique elements of input tensor and also return a tensor containing the index of each value of input
tensor corresponding to the output unique tensor.
The shape of Tensor `y` and Tensor `idx` is different in most cases, because Tensor `y` will be deduplicated,
and the shape of Tensor `idx` is consistent with the input.
To get the same shape between `idx` and `y`, please ref to 'UniqueWithPad' operator
Inputs:
- **x** (Tensor) - The input tensor.
Outputs:
Tuple, containing Tensor objects `(y, idx), `y` is a tensor with the
same type as `x`, and contains the unique elements in `x`, sorted in
ascending order. `idx` is a tensor containing indices of elements in
the input corresponding to the output tensor.
Raises:
TypeError: If `x` is not a Tensor.
Supported Platforms:
``Ascend`` ``GPU`` ``CPU``
Examples:
>>> x = Tensor(np.array([1, 2, 5, 2]), mindspore.int32)
>>> output = ops.Unique()(x)
>>> print(output)
(Tensor(shape=[3], dtype=Int32, value= [1, 2, 5]), Tensor(shape=[4], dtype=Int32, value= [0, 1, 2, 1]))
>>>
>>> # note that for GPU, this operator must be wrapped inside a model, and executed in graph mode.
>>> class UniqueNet(nn.Cell):
... def __init__(self):
... super(UniqueNet, self).__init__()
... self.unique_op = ops.Unique()
...
... def construct(self, x):
... output, indices = self.unique_op(x)
... return output, indices
...
>>> x = Tensor(np.array([1, 2, 5, 2]), mindspore.int32)
>>> net = UniqueNet()
>>> output = net(x)
>>> print(output)
(Tensor(shape=[3], dtype=Int32, value= [1, 2, 5]), Tensor(shape=[4], dtype=Int32, value= [0, 1, 2, 1]))
"""
@prim_attr_register
def __init__(self):
self.init_prim_io_names(inputs=['x'], outputs=['output'])
[docs]class Gather(PrimitiveWithCheck):
r"""
Returns a slice of the input tensor based on the specified indices and axis.
Slices the input tensor base on the indices at specified axis. See the following example for more clear.
Inputs:
- **input_params** (Tensor) - The shape of tensor is :math:`(x_1, x_2, ..., x_R)`.
The original Tensor.
- **input_indices** (Tensor) - The shape of tensor is :math:`(y_1, y_2, ..., y_S)`.
Specifies the indices of elements of the original Tensor. Must be in the range
`[0, input_param.shape[axis])`.
- **axis** (int) - Specifies the dimension index to gather indices.
Outputs:
Tensor, the shape of tensor is
:math:`input\_params.shape[:axis] + input\_indices.shape + input\_params.shape[axis + 1:]`.
Raises:
TypeError: If `axis` is not an int.
Supported Platforms:
``Ascend`` ``GPU`` ``CPU``
Examples:
>>> input_params = Tensor(np.array([[1, 2, 7, 42], [3, 4, 54, 22], [2, 2, 55, 3]]), mindspore.float32)
>>> input_indices = Tensor(np.array([1, 2]), mindspore.int32)
>>> axis = 1
>>> output = ops.Gather()(input_params, input_indices, axis)
>>> print(output)
[[ 2. 7.]
[ 4. 54.]
[ 2. 55.]]
>>> axis = 0
>>> output = ops.Gather()(input_params, input_indices, axis)
>>> print(output)
[[3. 4. 54. 22.]
[2. 2. 55. 3.]]
"""
@prim_attr_register
def __init__(self):
"""Initialize index_select"""
self.init_prim_io_names(inputs=['params', 'indices', 'axis'], outputs=['output'])
def __check__(self, params, indices, axis):
validator.check_subclass("params", params['dtype'], mstype.tensor, self.name)
validator.check_tensor_dtype_valid("indices", indices['dtype'], mstype.int_type, self.name)
validator.check_subclass("axis", axis['dtype'], [mstype.number], self.name)
axis_v = axis['value']
validator.check_value_type('axis', axis_v, [int], self.name)
rank = len(params['shape'])
validator.check_int_range(axis_v, -rank, rank, Rel.INC_LEFT, "axis", self.name)
class GatherV2(PrimitiveWithCheck):
"""
Same as operator Gather. GatherV2 will be deprecated in the future.
Please use Gather instead.
"""
@deprecated("1.1", "Gather", True)
@prim_attr_register
def __init__(self):
"""Initialize index_select"""
self.init_prim_io_names(inputs=['params', 'indices', 'axis'], outputs=['output'])
def __check__(self, params, indices, axis):
validator.check_subclass("params", params['dtype'], mstype.tensor, self.name)
validator.check_tensor_dtype_valid("indices", indices['dtype'], mstype.int_type, self.name)
validator.check_subclass("axis", axis['dtype'], [mstype.number], self.name)
axis_v = axis['value']
validator.check_value_type('axis', axis_v, [int], self.name)
rank = len(params['shape'])
validator.check_int_range(axis_v, -rank, rank, Rel.INC_LEFT, "axis", self.name)
[docs]class SparseGatherV2(Gather):
"""
Returns a slice of input tensor based on the specified indices and axis.
Inputs:
- **input_params** (Tensor) - The shape of tensor is :math:`(x_1, x_2, ..., x_R)`.
The original Tensor.
- **input_indices** (Tensor) - The shape of tensor is :math:`(y_1, y_2, ..., y_S)`.
Specifies the indices of elements of the original Tensor, must be in the range
`[0, input_param.shape[axis])`.
- **axis** (int) - Specifies the dimension index to gather indices.
Outputs:
Tensor, the shape of tensor is :math:`(z_1, z_2, ..., z_N)`.
Raises:
TypeError: If `axis` is not an int.
Supported Platforms:
``Ascend`` ``GPU``
Examples:
>>> input_params = Tensor(np.array([[1, 2, 7, 42], [3, 4, 54, 22], [2, 2, 55, 3]]), mindspore.float32)
>>> input_indices = Tensor(np.array([1, 2]), mindspore.int32)
>>> axis = 1
>>> out = ops.SparseGatherV2()(input_params, input_indices, axis)
>>> print(out)
[[2. 7.]
[4. 54.]
[2. 55.]]
"""
[docs]class Padding(PrimitiveWithInfer):
"""
Extends the last dimension of the input tensor from 1 to pad_dim_size, by filling with 0.
Args:
pad_dim_size (int): The value of the last dimension of x to be extended, which must be positive.
Inputs:
- **x** (Tensor) - The shape of tensor is :math:`(x_1, x_2, ..., x_R)`. The rank of x must be at least 2.
The last dimension of x must be 1.
Outputs:
Tensor, the shape of tensor is :math:`(z_1, z_2, ..., z_N)`.
Raises:
TypeError: If `pad_dim_size` is not an int.
ValueError: If `pad_dim_size` is less than 1.
Supported Platforms:
``Ascend``
Examples:
>>> x = Tensor(np.array([[8], [10]]), mindspore.float32)
>>> pad_dim_size = 4
>>> output = ops.Padding(pad_dim_size)(x)
>>> print(output)
[[ 8. 0. 0. 0.]
[10. 0. 0. 0.]]
"""
@prim_attr_register
def __init__(self, pad_dim_size=8):
"""Initialize padding"""
validator.check_value_type("pad_dim_size", pad_dim_size, [int], self.name)
validator.check_positive_int(pad_dim_size, "pad_dim_size", self.name)
self.pad_dim_size = pad_dim_size
def __infer__(self, x):
validator.check_subclass("x", x['dtype'], mstype.tensor, self.name)
x_shape = list(x['shape'])
validator.check_int(len(x_shape), 1, Rel.GT, "rank of x", self.name)
validator.check_int(x_shape[-1], 1, Rel.EQ, "last dim of x", self.name)
out_shape = x_shape
out_shape[-1] = self.pad_dim_size
out = {'shape': out_shape,
'dtype': x['dtype'],
'value': None}
return out
[docs]class UniqueWithPad(PrimitiveWithInfer):
"""
Returns unique elements and relative indexes in 1-D tensor, filled with padding num.
The basic function is the same as the Unique operator, but the UniqueWithPad operator adds a Pad function.
The returned tuple(`y`,`idx`) after the input Tensor `x` is processed by the unique operator,
in which the shapes of `y` and `idx` are mostly not equal. Therefore, in order to solve the above situation,
the UniqueWithPad operator will fill the `y` Tensor with the `pad_num` specified by the user
to make it have the same shape as the Tensor `idx`.
Inputs:
- **x** (Tensor) - The tensor need to be unique. Must be 1-D vector with types: int32, int64.
- **pad_num** (int) - Pad num.
Outputs:
tuple(Tensor), tuple of 2 tensors, y and idx.
- y (Tensor) - The unique elements filled with pad_num, the shape and type same as x.
- idx (Tensor) - The index of each value of x in the unique output y, the shape and type same as x.
Raises:
TypeError: If dtype of `x` is neither int32 nor int64.
ValueError: If length of shape of `x` is not equal to 1.
Supported Platforms:
``Ascend`` ``CPU``
Examples:
>>> x = Tensor(np.array([1, 1, 5, 5, 4, 4, 3, 3, 2, 2,]), mindspore.int32)
>>> pad_num = 8
>>> output = ops.UniqueWithPad()(x, pad_num)
>>> print(output)
(Tensor(shape=[10], dtype=Int32, value= [1, 5, 4, 3, 2, 8, 8, 8, 8, 8]),
Tensor(shape=[10], dtype=Int32, value= [0, 0, 1, 1, 2, 2, 3, 3, 4, 4]))
"""
@prim_attr_register
def __init__(self):
"""init UniqueWithPad"""
def __infer__(self, x, pad_num):
validator.check_tensor_dtype_valid("x", x['dtype'], [mstype.int32, mstype.int64], self.name)
validator.check_subclass("pad_num", pad_num['dtype'], [mstype.int32, mstype.int64], self.name)
x_shape = list(x['shape'])
validator.check("rank of x", len(x_shape), "expected", 1, Rel.EQ, self.name)
out_shape = x_shape
out = {'shape': (out_shape, out_shape),
'dtype': (x['dtype'], x['dtype']),
'value': None}
return out
[docs]class Split(PrimitiveWithCheck):
"""
Splits the input tensor into output_num of tensors along the given axis and output numbers.
The `input_x` tensor will be split into equally sized sub-tensors.
This requires that `input_x.shape(axis)` is divisible by `output_num`.
Args:
axis (int): Index of the split position. Default: 0.
output_num (int): The number of output tensors. Must be positive int. Default: 1.
Inputs:
- **input_x** (Tensor) - The shape of tensor is :math:`(x_1, x_2, ..., x_R)`.
Outputs:
tuple[Tensor], the shape of each output tensor is the same, which is
:math:`(y_1, y_2, ..., y_S)`.
Raises:
TypeError: If `axis` or `output_num` is not an int.
ValueError: If `axis` is out of the range [-len(`input_x.shape`), len(`input_x.shape`)),
or if the `output_num` is less than or equal to 0.
Supported Platforms:
``Ascend`` ``GPU`` ``CPU``
Examples:
>>> split = ops.Split(1, 2)
>>> x = Tensor(np.array([[1, 1, 1, 1], [2, 2, 2, 2]]), mindspore.int32)
>>> output = split(x)
>>> print(output)
(Tensor(shape=[2, 2], dtype=Int32, value=
[[1, 1],
[2, 2]]), Tensor(shape=[2, 2], dtype=Int32, value=
[[1, 1],
[2, 2]]))
"""
@prim_attr_register
def __init__(self, axis=0, output_num=1):
"""Initialize Split"""
validator.check_value_type("axis", axis, [int], self.name)
validator.check_value_type("output_num", output_num, [int], self.name)
validator.check_positive_int(output_num, "output_num", self.name)
self.axis = axis
self.output_num = output_num
def __check__(self, x):
validator.check_subclass("x", x['dtype'], mstype.tensor, self.name)
x_shape = list(x['shape'])
dim = len(x_shape)
validator.check_int_range(self.axis, -dim, dim, Rel.INC_LEFT, 'axis value', self.name)
if -1 not in x_shape:
# only validate when shape fully known
output_valid_check = x_shape[self.axis] % self.output_num
if output_valid_check != 0:
raise ValueError(f"x_shape[{self.axis}] {x_shape[self.axis]} must be divide exactly by"
f" output_num {self.output_num}")
size_splits = [x_shape[self.axis] // self.output_num] * self.output_num
self.add_prim_attr('size_splits', size_splits)
[docs]class Rank(PrimitiveWithInfer):
"""
Returns the rank of a tensor.
Returns a 0-D int32 Tensor representing the rank of input; the rank of a tensor
is the number of indices required to uniquely select each element of the tensor.
Inputs:
- **input_x** (Tensor) - The shape of tensor is :math:`(x_1, x_2, ..., x_R)`.
Outputs:
Tensor. 0-D int32 Tensor representing the rank of input, i.e., :math:`R`.
Raises:
TypeError: If `input_x` is not a Tensor.
Supported Platforms:
``Ascend`` ``GPU`` ``CPU``
Examples:
>>> input_tensor = Tensor(np.array([[2, 2], [2, 2]]), mindspore.float32)
>>> rank = ops.Rank()
>>> output = rank(input_tensor)
>>> print(output)
2
"""
@prim_attr_register
def __init__(self):
"""Initialize Rank"""
def __infer__(self, x):
validator.check_subclass("x", x['dtype'], mstype.tensor, self.name)
out = {'shape': None,
'dtype': None,
'value': len(x['shape'])}
return out
class TruncatedNormal(PrimitiveWithInfer):
"""
Returns a tensor of the specified shape filled with truncated normal values.
The generated values follow a normal distribution.
Args:
seed (int): A integer number used to create random seed. Default: 0.
dtype (:class:`mindspore.dtype`): Data type. Default: mindspore.float32.
Inputs:
- **shape** (tuple[int]) - The shape of the output tensor, is a tuple of positive integer.
Outputs:
Tensor, the data type of output tensor is the same as attribute `dtype`.
Examples:
>>> shape = (1, 2, 3)
>>> truncated_normal = ops.TruncatedNormal()
>>> output = truncated_normal(shape)
"""
@prim_attr_register
def __init__(self, seed=0, dtype=mstype.float32):
"""Initialize TruncatedNormal"""
validator.check_value_type('seed', seed, [int], self.name)
validator.check_types_same_and_valid({'dtype': dtype}, mstype.number_type, self.name)
def __infer__(self, shape):
shape_value = shape['value']
validator.check_value_type("shape", shape_value, [tuple], self.name)
for i, value in enumerate(shape_value):
validator.check_positive_int(value, f'{i}th value of shape', self.name)
out = {'shape': shape_value,
'dtype': mstype.tensor_type(self.dtype),
'value': None}
return out
[docs]class Size(PrimitiveWithInfer):
r"""
Returns the size of a tensor.
Returns an int scalar representing the elements size of input, the total number of elements in the tensor.
Inputs:
- **input_x** (Tensor) - The shape of tensor is :math:`(x_1, x_2, ..., x_R)`.
Outputs:
int, a scalar representing the elements size of `input_x`, tensor is the number of elements
in a tensor, :math:`size=x_1*x_2*...x_R`.
Raises:
TypeError: If `input_x` is not a Tensor.
Supported Platforms:
``Ascend`` ``GPU`` ``CPU``
Examples:
>>> input_tensor = Tensor(np.array([[2, 2], [2, 2]]), mindspore.float32)
>>> size = ops.Size()
>>> output = size(input_tensor)
>>> print(output)
4
"""
@prim_attr_register
def __init__(self):
"""Initialize Size"""
def __infer__(self, x):
size = 1
validator.check_subclass("x", x['dtype'], mstype.tensor, self.name)
shp = x['shape']
if not shp:
size = 0
else:
size = functools.reduce(lambda x, y: x * y, x['shape'])
out = {'shape': None,
'dtype': mstype.int32,
'value': size}
return out
[docs]class Fill(PrimitiveWithInfer):
"""
Creates a tensor filled with a scalar value.
Creates a tensor with shape described by the first argument and fills it with values in the second argument.
Inputs:
- **type** (mindspore.dtype) - The specified type of output tensor. Only constant value is allowed.
- **shape** (tuple) - The specified shape of output tensor. Only constant value is allowed.
- **value** (scalar) - Value to fill the returned tensor. Only constant value is allowed.
Outputs:
Tensor, has the same type and shape as input value.
Raises:
TypeError: If `shape` is not a tuple.
Supported Platforms:
``Ascend`` ``GPU`` ``CPU``
Examples:
>>> fill = ops.Fill()
>>> output = fill(mindspore.float32, (2, 2), 1)
>>> print(output)
[[1. 1.]
[1. 1.]]
"""
@prim_attr_register
def __init__(self):
"""Initialize Fill"""
def __infer__(self, dtype, dims, x):
validator.check_value_type("shape", dims['value'], [tuple], self.name)
validator.check_value_type("value", x['value'], [numbers.Number, bool], self.name)
for i, item in enumerate(dims['value']):
validator.check_positive_int(item, f'dims[{i}]', self.name)
valid_dtypes = [mstype.bool_, mstype.int8, mstype.int16, mstype.int32, mstype.int64,
mstype.uint8, mstype.uint16, mstype.uint32, mstype.uint64,
mstype.float16, mstype.float32, mstype.float64]
validator.check_types_same_and_valid({"value": dtype['value']}, valid_dtypes, self.name)
x_nptype = mstype.dtype_to_nptype(dtype['value'])
ret = np.full(dims['value'], x['value'], x_nptype)
out = {
'value': Tensor(ret),
'shape': dims['value'],
'dtype': x['dtype'],
}
return out
[docs]class Ones(PrimitiveWithInfer):
r"""
Creates a tensor filled with value ones.
Creates a tensor with shape described by the first argument and
fills it with value ones in type of the second argument.
Inputs:
- **shape** (Union[tuple[int], int]) - The specified shape of output tensor.
Only constant positive int is allowed.
- **type** (mindspore.dtype) - The specified type of output tensor. Only constant value is allowed.
Outputs:
Tensor, has the same type and shape as input shape value.
Raises:
TypeError: If `shape` is neither tuple nor int.
Supported Platforms:
``Ascend`` ``GPU`` ``CPU``
Examples:
>>> from mindspore.ops import operations as ops
>>> ones = ops.Ones()
>>> output = ones((2, 2), mindspore.float32)
>>> print(output)
[[1. 1.]
[1. 1.]]
"""
@prim_attr_register
def __init__(self):
"""Initialize Ones"""
def __infer__(self, dims, dtype):
if isinstance(dims['value'], int):
shape = (dims['value'],)
else:
shape = dims['value']
validator.check_value_type("shape", shape, [tuple], self.name)
for i, item in enumerate(shape):
validator.check_non_negative_int(item, shape[i], self.name)
valid_types = [mstype.bool_, mstype.int8, mstype.int16, mstype.int32, mstype.int64,
mstype.uint8, mstype.uint16, mstype.uint32, mstype.uint64,
mstype.float16, mstype.float32, mstype.float64]
validator.check_types_same_and_valid({"value": dtype['value']}, valid_types, self.name)
x_nptype = mstype.dtype_to_nptype(dtype['value'])
ret = np.ones(shape, x_nptype)
out = {
'value': Tensor(ret),
'shape': shape,
'dtype': x_nptype,
}
return out
[docs]class Zeros(PrimitiveWithInfer):
r"""
Creates a tensor filled with value zeros.
Creates a tensor with shape described by the first argument and
fills it with value zeros in type of the second argument.
Inputs:
- **shape** (Union[tuple[int], int]) - The specified shape of output tensor.
Only constant positive int is allowed.
- **type** (mindspore.dtype) - The specified type of output tensor. Only constant value is allowed.
Outputs:
Tensor, has the same type and shape as input shape value.
Raises:
TypeError: If `shape` is neither int nor tuple.
TypeError: If `shape` is a tuple whose elements are not all int.
Supported Platforms:
``Ascend`` ``GPU`` ``CPU``
Examples:
>>> from mindspore.ops import operations as ops
>>> zeros = ops.Zeros()
>>> output = zeros((2, 2), mindspore.float32)
>>> print(output)
[[0. 0.]
[0. 0.]]
"""
@prim_attr_register
def __init__(self):
"""Initialize Zeros"""
def __infer__(self, dims, dtype):
if isinstance(dims['value'], int):
shape = (dims['value'],)
else:
shape = dims['value']
validator.check_value_type("shape", shape, [tuple], self.name)
for i, item in enumerate(shape):
validator.check_non_negative_int(item, shape[i], self.name)
valid_types = [mstype.bool_, mstype.int8, mstype.int16, mstype.int32, mstype.int64,
mstype.uint8, mstype.uint16, mstype.uint32, mstype.uint64,
mstype.float16, mstype.float32, mstype.float64]
validator.check_types_same_and_valid({"value": dtype['value']}, valid_types, self.name)
x_nptype = mstype.dtype_to_nptype(dtype['value'])
ret = np.zeros(shape, x_nptype)
out = {
'value': Tensor(ret),
'shape': shape,
'dtype': x_nptype,
}
return out
[docs]class OnesLike(PrimitiveWithInfer):
"""
Creates a new tensor. The values of all elements are 1.
Returns a tensor of ones with the same shape and type as the input.
Inputs:
- **input_x** (Tensor) - Input tensor.
Outputs:
Tensor, has the same shape and type as `input_x` but filled with ones.
Raises:
TypeError: If `input_x` is not a Tensor.
Supported Platforms:
``Ascend`` ``GPU`` ``CPU``
Examples:
>>> oneslike = ops.OnesLike()
>>> x = Tensor(np.array([[0, 1], [2, 1]]).astype(np.int32))
>>> output = oneslike(x)
>>> print(output)
[[1 1]
[1 1]]
"""
@prim_attr_register
def __init__(self):
"""Initialize OnesLike"""
def infer_shape(self, x_shape):
return x_shape
def infer_dtype(self, x_dtype):
validator.check_tensor_dtype_valid('x', x_dtype, mstype.number_type + (mstype.bool_,), self.name)
return x_dtype
[docs]class ZerosLike(PrimitiveWithCheck):
"""
Creates a new tensor. All elements value are 0.
Returns a tensor of zeros with the same shape and data type as the input tensor.
Inputs:
- **input_x** (Tensor) - Input tensor.
Outputs:
Tensor, has the same shape and data type as `input_x` but filled with zeros.
Raises:
TypeError: If `input_x` is not a Tensor.
Supported Platforms:
``Ascend`` ``GPU`` ``CPU``
Examples:
>>> zeroslike = ops.ZerosLike()
>>> x = Tensor(np.array([[0, 1], [2, 1]]).astype(np.float32))
>>> output = zeroslike(x)
>>> print(output)
[[0. 0.]
[0. 0.]]
"""
@prim_attr_register
def __init__(self):
"""Initialize ZerosLike"""
self.init_prim_io_names(inputs=['x'], outputs=['y'])
def check_dtype(self, x_dtype):
validator.check_tensor_dtype_valid('x', x_dtype, mstype.number_type + (mstype.bool_,), self.name)
[docs]class TupleToArray(PrimitiveWithInfer):
"""
Converts a tuple to a tensor.
If the type of the first number in the tuple is integer, the data type of the output tensor is int.
Otherwise, the data type of the output tensor is float.
Inputs:
- **input_x** (tuple) - A tuple of numbers. These numbers have the same type. Only constant value is allowed.
Outputs:
Tensor, if the input tuple contains `N` numbers, then the shape of the output tensor is (N,).
Raises:
TypeError: If `input_x` is not a tuple.
ValueError: If length of `input_x` is less than or equal to 0.
Supported Platforms:
``Ascend`` ``GPU`` ``CPU``
Examples:
>>> type = ops.TupleToArray()((1,2,3))
>>> print(type)
[1 2 3]
"""
@prim_attr_register
def __init__(self):
"""Initialize TupleToArray"""
def infer_value(self, x):
validator.check_value_type("x", x, [tuple], self.name)
validator.check("size of x", len(x), '', 0, Rel.GT, self.name)
dtype = type(x[0])
for i, item in enumerate(x):
validator.check_value_type(f"x[{i}]", item, [numbers.Number], self.name)
if not all(isinstance(item, dtype) for item in x):
raise TypeError("For \'{self.name}\' all elements of input x must be have same type.")
if isinstance(x[0], int):
ret = np.array(x, np.int32)
else:
ret = np.array(x, np.float32)
return Tensor(ret)
def __call__(self, x):
args = list()
if isinstance(x, range):
args.append(tuple(x))
else:
args.append(x)
return _run_op(self, self.name, args)
[docs]class ScalarToArray(PrimitiveWithInfer):
"""
Converts a scalar to a `Tensor`.
Inputs:
- **input_x** (Union[int, float]) - The input is a scalar. Only constant value is allowed.
Outputs:
Tensor. 0-D Tensor and the content is the input.
Raises:
TypeError: If `input_x` is neither int nor float.
Supported Platforms:
``Ascend`` ``GPU`` ``CPU``
Examples:
>>> op = ops.ScalarToArray()
>>> data = 1.0
>>> output = op(data)
>>> print(output)
1.0
"""
@prim_attr_register
def __init__(self):
pass
def infer_value(self, x):
validator.check_value_type("x", x, [int, float], self.name)
if isinstance(x, int):
ret = np.array(x, np.int32)
else:
ret = np.array(x, np.float32)
return Tensor(ret)
[docs]class ScalarToTensor(PrimitiveWithInfer):
"""
Converts a scalar to a `Tensor`, and converts the data type to the specified type.
Inputs:
- **input_x** (Union[int, float]) - The input is a scalar. Only constant value is allowed.
- **dtype** (mindspore.dtype) - The target data type. Default: mindspore.float32. Only
constant value is allowed.
Outputs:
Tensor. 0-D Tensor and the content is the input.
Raises:
TypeError: If `input_x` is neither int nor float.
Supported Platforms:
``Ascend`` ``GPU`` ``CPU``
Examples:
>>> op = ops.ScalarToTensor()
>>> data = 1
>>> output = op(data, mindspore.float32)
>>> print(output)
1.0
"""
@prim_attr_register
def __init__(self):
pass
def infer_value(self, x, dtype=mstype.float32):
validator.check_value_type("x", x, [int, float], self.name)
validator.check_subclass("dtype", dtype, mstype.number, self.name)
data_type = mstype.dtype_to_nptype(dtype)
return Tensor(np.array(x, data_type))
[docs]class InvertPermutation(PrimitiveWithInfer):
r"""
Computes the inverse of an index permutation.
Given a tuple input, this operation inserts a dimension of 1 at the dimension
This operation calculates the inverse of the index replacement. It requires a
1-dimensional tuple x, which represents the array starting at zero,
and swaps each value with its index position. In other words, for the output
tuple y and the input tuple x, this operation calculates the following:
:math:`y[x[i]] = i, \quad i \in [0, 1, \ldots, \text{len}(x)-1]`.
Note:
These values must include 0. There must be no duplicate values and the
values can not be negative.
Inputs:
- **input_x** (Union(tuple[int], list[int]) - The input is constructed by multiple
integers, i.e., :math:`(y_1, y_2, ..., y_S)` representing the indices.
The values must include 0. There can be no duplicate values or negative values.
Only constant value is allowed. The maximum value must be equal to length of input_x.
Outputs:
tuple[int]. It has the same length as the input.
Raises:
TypeError: If `input_x` is neither tuple nor list.
TypeError: If element of `input_x` is not an int.
Supported Platforms:
``Ascend`` ``GPU`` ``CPU``
Examples:
>>> invert = ops.InvertPermutation()
>>> input_data = (3, 4, 0, 2, 1)
>>> output = invert(input_data)
>>> print(output)
(2, 4, 3, 0, 1)
"""
@prim_attr_register
def __init__(self):
"""Initialize InvertPermutation"""
self.set_const_prim(True)
def __infer__(self, x):
x_shp = x['shape']
x_value = x['value']
if x_value is None:
raise ValueError(f'For \'{self.name}\' the input value must be const.')
validator.check_value_type("shape", x_shp, [tuple, list], self.name)
if mstype.issubclass_(x['dtype'], mstype.tensor):
raise ValueError(f'For \'{self.name}\' the input value must be non-Tensor.')
for shp in x_shp:
if shp != []:
x_rank = len(np.array(x_value, np.int64).shape)
raise ValueError(f'For \'{self.name}\' the rank of input must be 1, but got {x_rank}.')
for i, value in enumerate(x_value):
validator.check_value_type("input[%d]" % i, value, [int], self.name)
z = [x_value[i] for i in range(len(x_value))]
z.sort()
for i in range(1, len(z)):
if z[i - 1] == z[i]:
raise ValueError(f"For {self.name}, {z[i]} is duplicated in the input.")
validator.check(f'value min', min(x_value), '', 0, Rel.EQ, self.name)
validator.check(f'value max', max(x_value), '', len(x_value) - 1, Rel.EQ, self.name)
y = [None] * len(x_value)
for i, value in enumerate(x_value):
validator.check_value_type("input[%d]" % i, value, [int], self.name)
validator.check(f'value', z[i], f'index', i, Rel.EQ, self.name)
y[value] = i
z.append(value)
return {'shape': x_shp,
'dtype': x['dtype'],
'value': tuple(y)}
[docs]class Argmax(PrimitiveWithInfer):
"""
Returns the indices of the maximum value of a tensor across the axis.
If the shape of input tensor is :math:`(x_1, ..., x_N)`, the shape of the output tensor will be
:math:`(x_1, ..., x_{axis-1}, x_{axis+1}, ..., x_N)`.
Args:
axis (int): Axis where the Argmax operation applies to. Default: -1.
output_type (:class:`mindspore.dtype`): An optional data type of `mindspore.dtype.int32`.
Default: `mindspore.dtype.int32`.
Inputs:
- **input_x** (Tensor) - Input tensor.
Outputs:
Tensor, indices of the max value of input tensor across the axis.
Raises:
TypeError: If `axis` is not an int.
TypeError: If `output_type` is neither int32 nor int64.
Supported Platforms:
``Ascend`` ``GPU`` ``CPU``
Examples:
>>> input_x = Tensor(np.array([[1, 20, 5], [67, 8, 9], [130, 24, 15]]).astype(np.float32))
>>> output = ops.Argmax(output_type=mindspore.int32)(input_x)
>>> print(output)
[1 0 0]
"""
@prim_attr_register
def __init__(self, axis=-1, output_type=mstype.int32):
"""Initialize Argmax"""
self.init_prim_io_names(inputs=['x'], outputs=['output'])
validator.check_value_type("axis", axis, [int], self.name)
validator.check_types_same_and_valid({'output': output_type}, [mstype.int32], self.name)
self.axis = axis
self.add_prim_attr('output_type', output_type)
def infer_shape(self, x_shape):
axis = self.axis
if axis is None:
axis = 0
x_rank = len(x_shape)
validator.check_int_range(axis, -x_rank, x_rank, Rel.INC_LEFT, "axis", self.name)
axis = axis + x_rank if axis < 0 else axis
ouput_shape = [x_shape[i] for i in range(x_rank) if i != axis]
return ouput_shape
def infer_dtype(self, x_dtype):
validator.check_subclass("input_x", x_dtype, mstype.tensor, self.name)
return mstype.tensor_type(self.output_type)
[docs]class Argmin(PrimitiveWithInfer):
"""
Returns the indices of the minimum value of a tensor across the axis.
If the shape of input tensor is :math:`(x_1, ..., x_N)`, the shape of the output tensor is
:math:`(x_1, ..., x_{axis-1}, x_{axis+1}, ..., x_N)`.
Args:
axis (int): Axis where the Argmin operation applies to. Default: -1.
output_type (:class:`mindspore.dtype`): An optional data type of `mindspore.dtype.int32`.
Default: `mindspore.dtype.int32`.
Inputs:
- **input_x** (Tensor) - Input tensor.
Outputs:
Tensor, indices of the min value of input tensor across the axis.
Raises:
TypeError: If `axis` is not an int.
TypeError: If `output_type` is neither int32 nor int64.
Supported Platforms:
``Ascend``
Examples:
>>> input_x = Tensor(np.array([2.0, 3.1, 1.2]), mindspore.float32)
>>> index = ops.Argmin()(input_x)
>>> print(index)
2
"""
@prim_attr_register
def __init__(self, axis=-1, output_type=mstype.int32):
"""Initialize Argmin"""
self.init_prim_io_names(inputs=['x'], outputs=['output'])
validator.check_value_type("axis", axis, [int], self.name)
validator.check_type_name("output_type", output_type, [mstype.int32, mstype.int64], self.name)
self.axis = axis
self.add_prim_attr('output_type', output_type)
def infer_shape(self, x_shape):
axis = self.axis
if axis is None:
axis = 0
x_rank = len(x_shape)
validator.check_int_range(axis, -x_rank, x_rank, Rel.INC_LEFT, "axis", self.name)
axis = axis + x_rank if axis < 0 else axis
ouput_shape = [x_shape[i] for i in range(x_rank) if i != axis]
return ouput_shape
def infer_dtype(self, x_dtype):
validator.check_subclass("input_x", x_dtype, mstype.tensor, self.name)
return mstype.tensor_type(self.output_type)
[docs]class ArgMaxWithValue(PrimitiveWithInfer):
"""
Calculates the maximum value with the corresponding index.
Calculates the maximum value along with the given axis for the input tensor. It returns the maximum values and
indices.
Note:
In auto_parallel and semi_auto_parallel mode, the first output index can not be used.
Args:
axis (int): The dimension to reduce. Default: 0.
keep_dims (bool): Whether to reduce dimension, if true, the output will keep same dimension with the input,
the output will reduce dimension if false. Default: False.
Inputs:
- **input_x** (Tensor) - The input tensor, can be any dimension. Set the shape of input tensor as
:math:`(x_1, x_2, ..., x_N)`.
Outputs:
tuple (Tensor), tuple of 2 tensors, containing the corresponding index and the maximum value of the input
tensor.
- index (Tensor) - The index for the maximum value of the input tensor. If `keep_dims` is true, the shape of
output tensors is :math:`(x_1, x_2, ..., x_{axis-1}, 1, x_{axis+1}, ..., x_N)`. Otherwise, the shape is
:math:`(x_1, x_2, ..., x_{axis-1}, x_{axis+1}, ..., x_N)`.
- output_x (Tensor) - The maximum value of input tensor, with the same shape as index.
Raises:
TypeError: If `keep_dims` is not a bool.
TypeError: If `axis` is not an int.
Supported Platforms:
``Ascend`` ``GPU``
Examples:
>>> input_x = Tensor(np.array([0.0, 0.4, 0.6, 0.7, 0.1]), mindspore.float32)
>>> index, output = ops.ArgMaxWithValue()(input_x)
>>> print(index, output)
3 0.7
"""
@prim_attr_register
def __init__(self, axis=0, keep_dims=False):
"""Initialize ArgMaxWithValue"""
self.axis = axis
self.keep_dims = keep_dims
validator.check_value_type('keep_dims', keep_dims, [bool], self.name)
validator.check_value_type('axis', axis, [int], self.name)
def infer_shape(self, x_shape):
axis = self.axis
x_rank = len(x_shape)
validator.check_int_range(axis, -x_rank, x_rank, Rel.INC_LEFT, "axis", self.name)
ouput_shape = _infer_shape_reduce(x_shape, self.axis, self.keep_dims, self.name)
return ouput_shape, ouput_shape
def infer_dtype(self, x_dtype):
validator.check_subclass("input_x", x_dtype, mstype.tensor, self.name)
return mstype.tensor_type(mstype.int32), x_dtype
[docs]class ArgMinWithValue(PrimitiveWithInfer):
"""
Calculates the minimum value with corresponding index, and returns indices and values.
Calculates the minimum value along with the given axis for the input tensor. It returns the minimum values and
indices.
Note:
In auto_parallel and semi_auto_parallel mode, the first output index can not be used.
Args:
axis (int): The dimension to reduce. Default: 0.
keep_dims (bool): Whether to reduce dimension, if true the output will keep the same dimension as the input,
the output will reduce dimension if false. Default: False.
Inputs:
- **input_x** (Tensor) - The input tensor, can be any dimension. Set the shape of input tensor as
:math:`(x_1, x_2, ..., x_N)`.
Outputs:
tuple (Tensor), tuple of 2 tensors, containing the corresponding index and the minimum value of the input
tensor.
- index (Tensor) - The index for the minimum value of the input tensor. If `keep_dims` is true, the shape of
output tensors is :math:`(x_1, x_2, ..., x_{axis-1}, 1, x_{axis+1}, ..., x_N)`. Otherwise, the shape is
:math:`(x_1, x_2, ..., x_{axis-1}, x_{axis+1}, ..., x_N)`.
- output_x (Tensor) - The minimum value of input tensor, with the same shape as index.
Raises:
TypeError: If `keep_dims` is not a bool.
TypeError: If `axis` is not an int.
Supported Platforms:
``Ascend`` ``CPU``
Examples:
>>> input_x = Tensor(np.array([0.0, 0.4, 0.6, 0.7, 0.1]), mindspore.float32)
>>> output = ops.ArgMinWithValue()(input_x)
>>> print(output)
(Tensor(shape=[], dtype=Int32, value= 0), Tensor(shape=[], dtype=Float32, value= 0.0))
"""
@prim_attr_register
def __init__(self, axis=0, keep_dims=False):
"""Initialize ArgMinWithValue"""
self.axis = axis
self.keep_dims = keep_dims
validator.check_value_type('keep_dims', keep_dims, [bool], self.name)
validator.check_value_type('axis', axis, [int], self.name)
def infer_shape(self, x_shape):
axis = self.axis
x_rank = len(x_shape)
validator.check_int_range(axis, -x_rank, x_rank, Rel.INC_LEFT, "axis", self.name)
ouput_shape = _infer_shape_reduce(x_shape, self.axis, self.keep_dims, self.name)
return ouput_shape, ouput_shape
def infer_dtype(self, x_dtype):
validator.check_subclass("input_x", x_dtype, mstype.tensor, self.name)
return mstype.tensor_type(mstype.int32), x_dtype
[docs]class Tile(PrimitiveWithInfer):
r"""
Replicates a tensor with given multiples times.
Creates a new tensor by replicating `input_x` `multiples` times. The i'th dimension of
output tensor has `input_x.shape(i) * multiples[i]` elements, and the values of `input_x`
are replicated `multiples[i]` times along the i'th dimension.
Inputs:
- **input_x** (Tensor) - 1-D or higher Tensor. Set the shape of input tensor as
:math:`(x_1, x_2, ..., x_S)`.
- **multiples** (tuple[int]) - The input tuple is constructed by multiple
integers, i.e., :math:`(y_1, y_2, ..., y_S)`. The length of `multiples`
cannot be smaller than the length of the shape of `input_x`.
Only constant value is allowed.
Outputs:
Tensor, has the same data type as the `input_x`.
- If the length of `multiples` is the same as the length of shape of `input_x`,
then the shape of their corresponding positions can be multiplied, and
the shape of Outputs is :math:`(x_1*y_1, x_2*y_2, ..., x_S*y_R)`.
- If the length of `multiples` is larger than the length of shape of `input_x`,
fill in multiple 1 in the length of the shape of `input_x` until their lengths are consistent.
Such as set the shape of `input_x` as :math:`(1, ..., x_1, x_2, ..., x_S)`,
then the shape of their corresponding positions can be multiplied, and
the shape of Outputs is :math:`(1*y_1, ..., x_S*y_R)`.
Raises:
TypeError: If `multiples` is not a tuple or its elements are not all int.
ValueError: If the elements of `multiples` are not all greater than 0.
Supported Platforms:
``Ascend`` ``GPU`` ``CPU``
Examples:
>>> tile = ops.Tile()
>>> input_x = Tensor(np.array([[1, 2], [3, 4]]), mindspore.float32)
>>> multiples = (2, 3)
>>> output = tile(input_x, multiples)
>>> print(output)
[[1. 2. 1. 2. 1. 2.]
[3. 4. 3. 4. 3. 4.]
[1. 2. 1. 2. 1. 2.]
[3. 4. 3. 4. 3. 4.]]
"""
@prim_attr_register
def __init__(self):
"""Initialize Tile"""
self.init_prim_io_names(inputs=['x', 'multiples'], outputs=['output'])
def check_elim(self, base_tensor, multiplier):
if (not isinstance(base_tensor, Tensor)) or (not isinstance(multiplier, tuple)):
raise TypeError("Expecting (Tensor, tuple), got: ({}, {})".format(base_tensor, multiplier))
if all(v == 1 for v in multiplier):
return (True, base_tensor)
return (False, None)
def __infer__(self, x, multiples):
multiples_v = multiples['value']
x_shp = x['shape']
validator.check_value_type("multiples", multiples_v, [tuple], self.name)
for i, multiple in enumerate(multiples_v):
validator.check_positive_int(multiple, "multiples[%d]" % i, self.name)
validator.check_value_type("x[\'dtype\']", x["dtype"], mstype.tensor_type, self.name)
len_sub = len(multiples_v) - len(x_shp)
multiples_w = None
if len_sub == 0:
multiples_w = multiples_v
if len_sub > 0:
for i in range(0, len_sub):
x_shp.insert(0, 1)
multiples_w = multiples_v
elif len_sub < 0:
raise ValueError(f'For \'{self.name}\' the length of multiples can not be smaller than '
f'the length of dimension in input_x.')
for i, a in enumerate(multiples_w):
x_shp[i] *= a
value = None
if x['value'] is not None:
value = Tensor(np.tile(x['value'].asnumpy(), multiples_w))
return {'shape': x_shp,
'dtype': x['dtype'],
'value': value}
[docs]class UnsortedSegmentSum(PrimitiveWithInfer):
r"""
Computes the sum of a tensor along segments.
Calculates a tensor such that :math:`\text{output}[i] = \sum_{segment\_ids[j] == i} \text{data}[j, \ldots]`, where
:math:`j` is a tuple describing the index of element in data. `segment_ids` selects which elements in data to sum
up. Segment_ids does not need to be sorted, and it does not need to cover all values in the entire valid value
range.
Note:
If the segment_id i is absent in the segment_ids, then output[i] will be filled with 0.
If the sum of the given segment_ids :math:`i` is empty, then :math:`\text{output}[i] = 0`. If the given segment_ids
is negative, the value will be ignored. 'num_segments' must be equal to the number of different segment_ids.
Inputs:
- **input_x** (Tensor) - The shape is :math:`(x_1, x_2, ..., x_R)`.
- **segment_ids** (Tensor) - Set the shape as :math:`(x_1, x_2, ..., x_N)`, where 0 < N <= R. Type must be int.
- **num_segments** (int) - Set :math:`z` as num_segments.
Outputs:
Tensor, the shape is :math:`(z, x_{N+1}, ..., x_R)`.
Raises:
TypeError: If `num_segments` is not an int.
ValueError: If length of shape of `segment_ids` is less than 1.
Supported Platforms:
``Ascend`` ``GPU`` ``CPU``
Examples:
>>> input_x = Tensor([1, 2, 3, 4], mindspore.float32)
>>> segment_ids = Tensor([0, 0, 1, 2], mindspore.int32)
>>> num_segments = 4
>>> output = ops.UnsortedSegmentSum()(input_x, segment_ids, num_segments)
>>> print(output)
[3. 3. 4. 0.]
"""
@prim_attr_register
def __init__(self):
"""Initialize UnsortedSegmentSum"""
self.init_prim_io_names(inputs=['x', 'segment_ids', 'num_segments'], outputs=['y'])
def __infer__(self, x, segment_ids, num_segments):
x_type = x['dtype']
x_shp = x['shape']
validator.check_subclass("input_x", x_type, mstype.tensor, self.name)
validator.check_value_type("x_shape", x_shp, [list], self.name)
x_shp_len = len(x_shp)
validator.check_positive_int(x_shp_len, "rank of input_x", self.name)
segment_ids_shp = segment_ids['shape']
segment_ids_type = segment_ids['dtype']
validator.check_subclass("segment_ids", segment_ids_type, mstype.tensor, self.name)
validator.check_value_type("segment_ids", segment_ids_shp, [list], self.name)
segment_ids_shp_len = len(segment_ids_shp)
validator.check_positive_int(segment_ids_shp_len, "rank of segment_ids", self.name)
validator.check(f'rank of input_x', len(x_shp),
'rank of segments_id', len(segment_ids_shp), Rel.GE, self.name)
if (not -1 in x_shp and not -1 in segment_ids_shp):
# only validate when both shapes fully known
for i, value in enumerate(segment_ids_shp):
validator.check("ids[%d]" % i, value, 'input[%d]' % i, x_shp[i], Rel.EQ, self.name)
num_segments_v = num_segments['value']
num_segments_type = num_segments['dtype']
validator.check_subclass("num_segments", num_segments_type, [mstype.tensor, mstype.number], self.name)
if isinstance(num_segments_type, type(mstype.tensor)):
validator.check_tensor_dtype_valid("num_segments", num_segments_type, [mstype.int32, mstype.int64],
self.name)
shp = [-1]
else:
validator.check_value_type('num_segments', num_segments_v, [int], self.name)
validator.check_positive_int(num_segments_v, "num_segments", self.name)
shp = [num_segments_v]
shp += x_shp[segment_ids_shp_len:]
if "max_value" in num_segments and "min_value" in num_segments:
output_max_shape = list(num_segments['max_value'])
output_min_shape = list(num_segments['min_value'])
else:
if isinstance(num_segments_type, type(mstype.tensor)):
raise ValueError("Num_segments only support int type when it is not a dynamic value")
output_max_shape = [num_segments_v]
output_min_shape = [num_segments_v]
if 'max_shape' in x and 'min_shape' in x:
max_output_incoming = x['max_shape']
min_output_incoming = x['min_shape']
else:
max_output_incoming = x_shp
min_output_incoming = x_shp
output_max_shape += max_output_incoming[segment_ids_shp_len:]
output_min_shape += min_output_incoming[segment_ids_shp_len:]
return {'shape': shp,
'max_shape': output_max_shape,
'min_shape': output_min_shape,
'dtype': mstype.tensor_type(x_type.element_type()),
'value': None}
[docs]class UnsortedSegmentMin(PrimitiveWithCheck):
"""
Computes the minimum of a tensor along segments.
Note:
If the segment_id i is absent in the segment_ids, then output[i] will be filled with
the maximum value of the input_x's type.
Inputs:
- **input_x** (Tensor) - The shape is :math:`(x_1, x_2, ..., x_R)`.
The data type must be float16, float32 or int32.
- **segment_ids** (Tensor) - A `1-D` tensor whose shape is :math:`(x_1)`, the value must be >= 0.
The data type must be int32.
- **num_segments** (int) - The value specifies the number of distinct `segment_ids`.
Outputs:
Tensor, set the number of `num_segments` as `N`, the shape is :math:`(N, x_2, ..., x_R)`.
Raises:
TypeError: If `num_segments` is not an int.
ValueError: If length of shape of `segment_ids` is not equal to 1.
Supported Platforms:
``Ascend`` ``GPU``
Examples:
>>> input_x = Tensor(np.array([[1, 2, 3], [4, 5, 6], [4, 2, 1]]).astype(np.float32))
>>> segment_ids = Tensor(np.array([0, 1, 1]).astype(np.int32))
>>> num_segments = 2
>>> unsorted_segment_min = ops.UnsortedSegmentMin()
>>> output = unsorted_segment_min(input_x, segment_ids, num_segments)
>>> print(output)
[[1. 2. 3.]
[4. 2. 1.]]
"""
@prim_attr_register
def __init__(self):
"""Initialize UnsortedSegmentMin"""
self.init_prim_io_names(inputs=['x', 'segment_ids', 'num_segments'], outputs=['y'])
def __check__(self, x, segment_ids, num_segments):
x_shape = x['shape']
segment_ids_shape = segment_ids['shape']
valid_type = [mstype.float16, mstype.float32, mstype.int32]
validator.check_tensor_dtype_valid("x", x['dtype'], valid_type, self.name)
validator.check_tensor_dtype_valid("segment_ids", segment_ids['dtype'], [mstype.int32], self.name)
validator.check_equal_int(len(segment_ids_shape), 1, "rank of segment_ids_shape", self.name)
num_segments_type = num_segments['dtype']
validator.check_subclass("num_segments", num_segments_type, [mstype.number], self.name)
if (not -1 in x_shape and not -1 in segment_ids_shape):
# only validate when both shapes fully known
validator.check(f'first shape of input_x', x_shape[0],
'length of segments_id', segment_ids_shape[0], Rel.EQ, self.name)
num_segments_v = num_segments['value']
validator.check_value_type('num_segments', num_segments_v, [int], self.name)
validator.check_positive_int(num_segments_v, "num_segments", self.name)
[docs]class UnsortedSegmentMax(PrimitiveWithCheck):
"""
Computes the maximum along segments of a tensor.
Note:
If the segment_id i is absent in the segment_ids, then output[i] will be filled with
the minimum value of the input_x's type.
Inputs:
- **input_x** (Tensor) - The shape is :math:`(x_1, x_2, ..., x_R)`.
The data type must be float16, float32 or int32.
- **segment_ids** (Tensor) - A `1-D` tensor whose shape is :math:`(x_1)`, the value must be >= 0.
The data type must be int32.
- **num_segments** (int) - The value specifies the number of distinct `segment_ids`.
Outputs:
Tensor, set the number of `num_segments` as `N`, the shape is :math:`(N, x_2, ..., x_R)`.
Raises:
TypeError: If `num_segments` is not an int.
ValueError: If length of shape of `segment_ids` is not equal to 1.
Supported Platforms:
``Ascend`` ``GPU``
Examples:
>>> input_x = Tensor(np.array([[1, 2, 3], [4, 5, 6], [4, 2, 1]]).astype(np.float32))
>>> segment_ids = Tensor(np.array([0, 1, 1]).astype(np.int32))
>>> num_segments = 2
>>> unsorted_segment_max = ops.UnsortedSegmentMax()
>>> output = unsorted_segment_max(input_x, segment_ids, num_segments)
>>> print(output)
[[1. 2. 3.]
[4. 5. 6.]]
"""
@prim_attr_register
def __init__(self):
"""Initialize UnsortedSegmentMax"""
self.init_prim_io_names(inputs=['x', 'segment_ids', 'num_segments'], outputs=['y'])
def __check__(self, x, segment_ids, num_segments):
x_shape = x['shape']
segment_ids_shape = segment_ids['shape']
valid_type = [mstype.float16, mstype.float32, mstype.int32]
validator.check_tensor_dtype_valid("x", x['dtype'], valid_type, self.name)
validator.check_tensors_dtypes_same_and_valid({"segment_ids": segment_ids['dtype']},
[mstype.int32, mstype.int64], self.name)
validator.check_equal_int(len(segment_ids_shape), 1, "rank of segment_ids_shape", self.name)
num_segments_type = num_segments['dtype']
validator.check_subclass("num_segments", num_segments_type, [mstype.number], self.name)
if (not -1 in x_shape and not -1 in segment_ids_shape):
# only validate when both shapes fully known
validator.check(f'first shape of input_x', x_shape[0],
'length of segments_id', segment_ids_shape[0], Rel.EQ, self.name)
num_segments_v = num_segments['value']
validator.check_value_type('num_segments', num_segments_v, [int], self.name)
validator.check_positive_int(num_segments_v, "num_segments", self.name)
[docs]class UnsortedSegmentProd(PrimitiveWithInfer):
"""
Computes the product of a tensor along segments.
Inputs:
- **input_x** (Tensor) - The shape is :math:`(x_1, x_2, ..., x_R)`.
With float16, float32 or int32 data type.
- **segment_ids** (Tensor) - A `1-D` tensor whose shape is :math:`(x_1)`, the value must be >= 0.
Data type must be int32.
- **num_segments** (int) - The value specifies the number of distinct `segment_ids`,
must be greater than 0.
Outputs:
Tensor, set the number of `num_segments` as `N`, the shape is :math:`(N, x_2, ..., x_R)`.
Raises:
TypeError: If `num_segments` is not an int.
ValueError: If length of shape of `segment_ids` is not equal to 1.
Supported Platforms:
``Ascend``
Examples:
>>> input_x = Tensor(np.array([[1, 2, 3], [4, 5, 6], [4, 2, 1]]).astype(np.float32))
>>> segment_ids = Tensor(np.array([0, 1, 0]).astype(np.int32))
>>> num_segments = 2
>>> unsorted_segment_prod = ops.UnsortedSegmentProd()
>>> output = unsorted_segment_prod(input_x, segment_ids, num_segments)
>>> print(output)
[[4. 4. 3.]
[4. 5. 6.]]
"""
@prim_attr_register
def __init__(self):
"""Initialize UnsortedSegmentProd"""
self.init_prim_io_names(inputs=['x', 'segment_ids', 'num_segments'], outputs=['y'])
def __infer__(self, x, segment_ids, num_segments):
x_type = x['dtype']
x_shape = x['shape']
segment_ids_shape = segment_ids['shape']
validator.check_subclass("input_x", x_type, mstype.tensor, self.name)
validator.check_value_type("x_shape", x_shape, [list], self.name)
valid_type = [mstype.float16, mstype.float32, mstype.int32]
validator.check_tensor_dtype_valid("x", x['dtype'], valid_type, self.name)
validator.check_tensor_dtype_valid("segment_ids", segment_ids['dtype'], [mstype.int32], self.name)
validator.check_equal_int(len(segment_ids_shape), 1, "rank of segment_ids_shape", self.name)
validator.check(f'first shape of input_x', x_shape[0],
'length of segments_id', segment_ids_shape[0], Rel.EQ, self.name)
num_segments_v = num_segments['value']
validator.check_value_type('num_segments', num_segments_v, [int], self.name)
validator.check_positive_int(num_segments_v, "num_segments", self.name)
segment_ids_shape_len = len(segment_ids_shape)
out_shape = [num_segments_v]
out_shape += x_shape[segment_ids_shape_len:]
out = {'shape': out_shape,
'dtype': mstype.tensor_type(x_type.element_type()),
'value': None}
return out
[docs]class Concat(PrimitiveWithInfer):
r"""
Connect tensor in the specified axis.
Connect input tensors along with the given axis.
The input data is a tuple of tensors. These tensors have the same rank `R`. Set the given axis as `m`, and
:math:`0 \le m < R`. Set the number of input tensors as `N`. For the :math:`i`-th tensor :math:`t_i`, it has
the shape of :math:`(x_1, x_2, ..., x_{mi}, ..., x_R)`. :math:`x_{mi}` is the :math:`m`-th dimension of the
:math:`i`-th tensor. Then, the shape of the output tensor is
.. math::
(x_1, x_2, ..., \sum_{i=1}^Nx_{mi}, ..., x_R)
Args:
axis (int): The specified axis. Default: 0.
Inputs:
- **input_x** (tuple, list) - A tuple or a list of input tensors.
Outputs:
Tensor, the shape is :math:`(x_1, x_2, ..., \sum_{i=1}^Nx_{mi}, ..., x_R)`.
Raises:
TypeError: If `axis` is not an int.
Supported Platforms:
``Ascend`` ``GPU`` ``CPU``
Examples:
>>> data1 = Tensor(np.array([[0, 1], [2, 1]]).astype(np.float32))
>>> data2 = Tensor(np.array([[0, 1], [2, 1]]).astype(np.float32))
>>> op = ops.Concat()
>>> output = op((data1, data2))
>>> print(output)
[[0. 1.]
[2. 1.]
[0. 1.]
[2. 1.]]
"""
@prim_attr_register
def __init__(self, axis=0):
"""Initialize Concat"""
validator.check_value_type("axis", axis, [int], self.name)
def __infer__(self, input_x):
axis = self.axis
x_shp = input_x['shape']
x_type = input_x['dtype']
_, all_shp, _ = get_concat_offset(x_shp, x_type, axis, self.name)
self.add_prim_attr('inputNums', len(x_shp))
ret_shp = x_shp[0].copy()
value = None
if input_x['value'] is not None:
value = Tensor(np.concatenate([x.asnumpy() for x in input_x['value']], axis=axis))
ret_shp[axis] = all_shp
out = {'shape': ret_shp,
'dtype': x_type[0],
'value': value}
if -1 in x_shp[0]:
x_min_shp = input_x['min_shape']
ret_min_shp = x_min_shp[0].copy()
ret_min_shp[axis] = 0
for all_min_shp in x_min_shp:
ret_min_shp[axis] += all_min_shp[axis]
out['min_shape'] = ret_min_shp
x_max_shp = input_x['max_shape']
ret_max_shp = x_max_shp[0].copy()
ret_max_shp[axis] = 0
for all_max_shp in x_max_shp:
ret_max_shp[axis] += all_max_shp[axis]
out['max_shape'] = ret_max_shp
return out
[docs]class ParallelConcat(PrimitiveWithInfer):
r"""
Concats tensor in the first dimension.
Concats input tensors along with the first dimension.
Note:
The input tensors are all required to have size 1 in the first dimension.
Inputs:
- **values** (tuple, list) - A tuple or a list of input tensors. The data type and shape of these
tensors must be the same.
Outputs:
Tensor, data type is the same as `values`.
Raises:
ValueError: If length of shape of `values` is less than 1.
Supported Platforms:
``Ascend``
Examples:
>>> data1 = Tensor(np.array([[0, 1]]).astype(np.int32))
>>> data2 = Tensor(np.array([[2, 1]]).astype(np.int32))
>>> op = ops.ParallelConcat()
>>> output = op((data1, data2))
>>> print(output)
[[0 1]
[2 1]]
"""
@prim_attr_register
def __init__(self):
"""Initialize ParallelConcat"""
def __infer__(self, values):
x_shp = values['shape']
x_type = values['dtype']
validator.check_int(len(x_shp), 1, Rel.GE, f'x_shp length', self.name)
args = {f"x_type[{i}]": elem for i, elem in enumerate(x_type)}
validator.check_tensors_dtypes_same_and_valid(args, mstype.number_type + (mstype.bool_,), self.name)
first_elem = x_shp[0]
for i, elem in enumerate(x_shp[1:]):
j = i + 1
validator.check_equal_int(elem[0], 1, f'x_shp[{j}][0]', self.name)
validator.check(f"x_shp[0] shape", first_elem, f"x_shp[{j}] shape", elem, Rel.EQ, self.name)
ret_shp = x_shp[0].copy()
ret_shp[0] = len(x_shp)
self.add_prim_attr('shape', ret_shp)
self.add_prim_attr('N', len(x_shp))
out = {'shape': ret_shp,
'dtype': x_type[0],
'value': None}
return out
def _get_stack_shape(x_shape, x_type, axis, prim_name):
"""for stack output shape"""
validator.check_value_type("shape", x_shape, [tuple, list], prim_name)
validator.check_int(len(x_shape), 1, Rel.GE, "len of input_x", prim_name)
validator.check_subclass("input_x[0]", x_type[0], mstype.tensor, prim_name)
rank_base = len(x_shape[0])
n = len(x_shape)
out_shape = x_shape[0]
validator.check_int_range(axis, -rank_base - 1, rank_base, Rel.INC_BOTH, 'axis', prim_name)
if axis < 0:
axis = axis + rank_base + 1
for i in range(1, n):
validator.check('x_type[%d]' % i, x_type[i], 'base', x_type[0], Rel.EQ, prim_name, TypeError)
if x_shape[i] != x_shape[0]:
raise ValueError(f"For \'{prim_name}\' element {i} shape in input can not pack with first element")
out_shape.insert(axis, n)
return out_shape
class Pack(PrimitiveWithInfer):
"""
Same as operator Stack. Pack will be deprecated in the future.
Please use Stack instead.
"""
@deprecated("1.1", "Stack", True)
@prim_attr_register
def __init__(self, axis=0):
"""Initialize Pack"""
validator.check_value_type("axis", axis, [int], self.name)
self.axis = axis
def __infer__(self, value):
x_shape = value['shape']
x_type = value['dtype']
self.add_prim_attr('num', len(x_shape))
all_shape = _get_stack_shape(x_shape, x_type, self.axis, self.name)
out = {'shape': all_shape,
'dtype': x_type[0],
'value': None}
return out
[docs]class Stack(PrimitiveWithInfer):
r"""
Stacks a list of tensors in specified axis.
Stacks the list of input tensors with the same rank `R`, output is a tensor of rank `(R+1)`.
Given input tensors of shape :math:`(x_1, x_2, ..., x_R)`. Set the number of input tensors as `N`.
If :math:`0 \le axis`, the shape of the output tensor is
:math:`(x_1, x_2, ..., x_{axis}, N, x_{axis+1}, ..., x_R)`.
Args:
axis (int): Dimension to stack. Default: 0.
Negative values wrap around. The range is [-(R+1), R+1).
Inputs:
- **input_x** (Union[tuple, list]) - A Tuple or list of Tensor objects with the same shape and type.
Outputs:
Tensor. A stacked Tensor with the same type as `input_x`.
Raises:
TypeError: If the data types of elements in `input_x` are not the same.
ValueError: If the length of `input_x` is not greater than 1;
or if axis is out of the range [-(R+1), R+1);
or if the shapes of elements in input_x are not the same.
Supported Platforms:
``Ascend`` ``GPU`` ``CPU``
Examples:
>>> data1 = Tensor(np.array([0, 1]).astype(np.float32))
>>> data2 = Tensor(np.array([2, 3]).astype(np.float32))
>>> stack = ops.Stack()
>>> output = stack([data1, data2])
>>> print(output)
[[0. 1.]
[2. 3.]]
"""
@prim_attr_register
def __init__(self, axis=0):
"""Initialize Stack"""
validator.check_value_type("axis", axis, [int], self.name)
self.axis = axis
def __infer__(self, value):
x_shape = value['shape']
x_type = value['dtype']
self.add_prim_attr('num', len(x_shape))
all_shape = _get_stack_shape(x_shape, x_type, self.axis, self.name)
out = {'shape': all_shape,
'dtype': x_type[0],
'value': None}
return out
class Unpack(PrimitiveWithInfer):
"""
Same as operator Unstack. Unpack will be deprecated in the future.
Please use Unstack instead.
"""
@deprecated("1.1", "Unstack", True)
@prim_attr_register
def __init__(self, axis=0):
"""Initialize Unpack"""
validator.check_value_type("axis", axis, [int], self.name)
self.axis = axis
def __infer__(self, x):
validator.check_subclass("x", x['dtype'], mstype.tensor, self.name)
x_shape = list(x['shape'])
dim = len(x_shape)
validator.check_int_range(self.axis, -dim, dim, Rel.INC_LEFT, 'axis value', self.name)
if self.axis < 0:
self.axis = self.axis + dim
output_num = x_shape[self.axis]
validator.check_value_type("num", output_num, [int], self.name)
validator.check_positive_int(output_num, "output_num", self.name)
self.add_prim_attr('num', output_num)
output_valid_check = x_shape[self.axis] - output_num
validator.check_int(output_valid_check, 0, Rel.EQ,
"The dimension which to unstack divides output_num", self.name)
out_shapes = []
out_dtypes = []
out_shape = x_shape[:self.axis] + x_shape[self.axis + 1:]
for _ in range(output_num):
out_shapes.append(tuple(out_shape))
out_dtypes.append(x['dtype'])
out_shapes = tuple(out_shapes)
out_dtypes = tuple(out_dtypes)
out = {'shape': out_shapes,
'dtype': out_dtypes,
'value': None}
return out
[docs]class Unstack(PrimitiveWithInfer):
r"""
Unstacks tensor in specified axis.
Unstacks a tensor of rank `R` along axis dimension, output tensors will have rank `(R-1)`.
Given a tensor of shape :math:`(x_1, x_2, ..., x_R)`. If :math:`0 \le axis`,
the shape of tensor in output is :math:`(x_1, x_2, ..., x_{axis}, x_{axis+2}, ..., x_R)`.
This is the opposite of pack.
Args:
axis (int): Dimension along which to pack. Default: 0.
Negative values wrap around. The range is [-R, R).
Inputs:
- **input_x** (Tensor) - The shape is :math:`(x_1, x_2, ..., x_R)`.
A tensor to be unstacked and the rank of the tensor must be greater than 0.
Outputs:
A tuple of tensors, the shape of each objects is the same.
Raises:
ValueError: If axis is out of the range [-len(input_x.shape), len(input_x.shape)).
Supported Platforms:
``Ascend`` ``GPU`` ``CPU``
Examples:
>>> unstack = ops.Unstack()
>>> input_x = Tensor(np.array([[1, 1, 1, 1], [2, 2, 2, 2]]))
>>> output = unstack(input_x)
>>> print(output)
(Tensor(shape=[4], dtype=Int64, value= [1, 1, 1, 1]), Tensor(shape=[4], dtype=Int64, value= [2, 2, 2, 2]))
"""
@prim_attr_register
def __init__(self, axis=0):
"""Initialize Unstack"""
validator.check_value_type("axis", axis, [int], self.name)
self.axis = axis
def __infer__(self, x):
validator.check_subclass("x", x['dtype'], mstype.tensor, self.name)
x_shape = list(x['shape'])
dim = len(x_shape)
validator.check_int_range(self.axis, -dim, dim, Rel.INC_LEFT, 'axis value', self.name)
if self.axis < 0:
self.axis = self.axis + dim
output_num = x_shape[self.axis]
validator.check_value_type("num", output_num, [int], self.name)
validator.check_positive_int(output_num, "output_num", self.name)
self.add_prim_attr('num', output_num)
output_valid_check = x_shape[self.axis] - output_num
validator.check_int(output_valid_check, 0, Rel.EQ,
"The dimension which to unstack divides output_num", self.name)
out_shapes = []
out_dtypes = []
out_shape = x_shape[:self.axis] + x_shape[self.axis + 1:]
for _ in range(output_num):
out_shapes.append(tuple(out_shape))
out_dtypes.append(x['dtype'])
out_shapes = tuple(out_shapes)
out_dtypes = tuple(out_dtypes)
out = {'shape': out_shapes,
'dtype': out_dtypes,
'value': None}
return out
[docs]class Slice(PrimitiveWithInfer):
"""
Slices a tensor in the specified shape.
Slice the tensor 'input_x` in shape of `size` and starting at the location specified by `begin`,
The slice `begin` represents the offset in each dimension of `input_x`,
The slice `size` represents the size of the output tensor.
Note that `begin` is zero-based and `size` is one-based.
If `size[i]` is -1, all remaining elements in dimension i are included in the slice.
This is equivalent to setting :math:`size[i] = input_x.shape(i) - begin[i]`
Inputs:
- **input_x** (Tensor): The target tensor.
- **begin** (Union[tuple, list]): The beginning of the slice. Only constant value is allowed.
- **size** (Union[tuple, list]): The size of the slice. Only constant value is allowed.
Outputs:
Tensor, the shape is : input `size`, the data type is the same as `input_x`.
Raises:
TypeError: If `begin` or `size` is neither tuple nor list.
Supported Platforms:
``Ascend`` ``GPU`` ``CPU``
Examples:
>>> data = Tensor(np.array([[[1, 1, 1], [2, 2, 2]],
... [[3, 3, 3], [4, 4, 4]],
... [[5, 5, 5], [6, 6, 6]]]).astype(np.int32))
>>> slice = ops.Slice()
>>> output = slice(data, (1, 0, 0), (1, 1, 3))
>>> print(output)
[[[3 3 3]]]
"""
@prim_attr_register
def __init__(self):
"""Initialize slice"""
self.init_prim_io_names(inputs=['x', 'begin', 'size'], outputs=['output'])
def __infer__(self, x, begin, size):
x_shape = x['shape']
x_shp_len = len(x_shape)
validator.check_const_input('begin', begin['value'], self.name)
validator.check_const_input('size', size['value'], self.name)
begin_v, size_v = begin['value'], size['value']
if begin_v is None or size_v is None:
return {'shape': None,
'dtype': x['dtype'],
'value': None}
validator.check_value_type("input begin", begin_v, [tuple, list], self.name)
validator.check_value_type("input size", size_v, [tuple, list], self.name)
for key, value in zip(('begin', 'size'), (begin_v, size_v)):
validator.check(f'len of {key}', len(value),
'len x\'s dim', x_shp_len)
for i in range(x_shp_len):
validator.check_positive_int(size_v[i], f'input size[{i}]')
if x_shape[i] < begin_v[i] + size_v[i]:
y = begin_v[i] + size_v[i]
raise ValueError("For '%s' slice shape can not bigger than origin shape %d, %d." %
(self.name, x_shape[i], y))
return {'shape': size_v,
'dtype': x['dtype'],
'value': None}
[docs]class ReverseV2(PrimitiveWithInfer):
"""
Reverses specific dimensions of a tensor.
Args:
axis (Union[tuple(int), list(int)): The indices of the dimensions to reverse.
Inputs:
- **input_x** (Tensor) - The target tensor.
Outputs:
Tensor, has the same shape and type as `input_x`.
Raises:
TypeError: If `axis` is neither list nor tuple.
TypeError: If element of `axis` is not an int.
Supported Platforms:
``Ascend``
Examples:
>>> input_x = Tensor(np.array([[1, 2, 3, 4], [5, 6, 7, 8]]), mindspore.int32)
>>> op = ops.ReverseV2(axis=[1])
>>> output = op(input_x)
>>> print(output)
[[4 3 2 1]
[8 7 6 5]]
"""
@prim_attr_register
def __init__(self, axis):
validator.check_value_type('axis', axis, [list, tuple], self.name)
for i, each in enumerate(axis):
validator.check_value_type(f'axis[{i}]', each, [int], self.name)
self.axis = axis
self.init_prim_io_names(inputs=['x'], outputs=['output'])
def infer_shape(self, x_shape):
dim = len(x_shape)
for i, each in enumerate(self.axis):
validator.check_int_range(each, -dim, dim, Rel.INC_LEFT, f'axis[{i}]', self.name)
return x_shape
def infer_dtype(self, x_dtype):
validator.check_tensor_dtype_valid('x', x_dtype, (mstype.bool_,) + mstype.number_type, self.name)
return x_dtype
[docs]class Rint(PrimitiveWithInfer):
"""
Returns an integer that is closest to x element-wise.
Inputs:
- **input_x** (Tensor) - The target tensor, which must be one of the following types:
float16, float32.
Outputs:
Tensor, has the same shape and type as `input_x`.
Raises:
TypeError: If dtype of `input_x` is neither float16 nor float32.
Supported Platforms:
``Ascend``
Examples:
>>> input_x = Tensor(np.array([-1.6, -0.1, 1.5, 2.0]), mindspore.float32)
>>> op = ops.Rint()
>>> output = op(input_x)
>>> print(output)
[-2. 0. 2. 2.]
"""
@prim_attr_register
def __init__(self):
self.init_prim_io_names(inputs=['x'], outputs=['output'])
def infer_shape(self, x_shape):
return x_shape
def infer_dtype(self, x_dtype):
validator.check_tensor_dtype_valid('x', x_dtype, [mstype.float16, mstype.float32], self.name)
return x_dtype
[docs]class Select(PrimitiveWithInfer):
r"""
Returns the selected elements, either from input :math:`x` or input :math:`y`, depending on the `condition`.
Given a tensor as input, this operation inserts a dimension of 1 at the dimension,
it was invalid when both math: 'x' and math: 'y' are none.
Keep in mind that the shape of the output tensor can vary depending
on how many true values are in the input. Indexes are output in row-first
order.
If neither is None, math:`x` and :math:`y` must have the same shape. If :math:`x` and :math:`y` are
scalars, the conditional tensor must be a scalar. If :math:`x` and :math:`y` are
higher-dimensional vectors, the `condition` must be a vector whose size matches the
first dimension of :math:`x`, or must have the same shape as :math:`y`.
The conditional tensor acts as an optional compensation (mask), which
determines whether the corresponding element / row in the output must be
selected from :math:`x` (if true) or :math:`y` (if false) based on the value of each
element.
It can be defined as:
.. math::
out_i = \begin{cases}
x_i, & \text{if } condition_i \\
y_i, & \text{otherwise}
\end{cases}
If condition is a vector, then :math:`x` and :math:`y` are higher-dimensional matrices, then it
chooses to copy that row (external dimensions) from :math:`x` and :math:`y`. If condition has
the same shape as :math:`x` and :math:`y`, you can choose to copy these elements from :math:`x`
and :math:`y`.
Inputs:
- **input_cond** (Tensor[bool]) - The shape is :math:`(x_1, x_2, ..., x_N, ..., x_R)`.
The condition tensor, decides which element is chosen.
- **input_x** (Tensor) - The shape is :math:`(x_1, x_2, ..., x_N, ..., x_R)`.
The first input tensor.
- **input_y** (Tensor) - The shape is :math:`(x_1, x_2, ..., x_N, ..., x_R)`.
The second input tensor.
Outputs:
Tensor, has the same shape as `input_x`. The shape is :math:`(x_1, x_2, ..., x_N, ..., x_R)`.
Raises:
TypeError: If `input_x` or `input_y` is not a Tensor.
ValueError: If shape of `input_x` is not equal to shape of `input_y` or shape of `input_cond`.
Supported Platforms:
``Ascend`` ``GPU`` ``CPU``
Examples:
>>> select = ops.Select()
>>> input_cond = Tensor([True, False])
>>> input_x = Tensor([2,3], mindspore.float32)
>>> input_y = Tensor([1,2], mindspore.float32)
>>> output = select(input_cond, input_x, input_y)
>>> print(output)
[2. 2.]
"""
@prim_attr_register
def __init__(self):
"""init"""
self.init_prim_io_names(inputs=['condition', 'x', 'y'], outputs=['output'])
def infer_shape(self, cond_shape, x_shape, y_shape):
if cond_shape != x_shape or x_shape != y_shape:
raise ValueError('The x_shape and y_shape must be the same as cond_shape.')
return x_shape
def infer_dtype(self, cond_type, x_type, y_type):
validator.check_subclass("x_type", x_type, mstype.tensor, self.name)
validator.check_subclass("y_type", y_type, mstype.tensor, self.name)
validator.check_tensor_dtype_valid("cond", cond_type, [mstype.bool_], self.name)
if x_type != y_type:
raise TypeError('\'%s\' the x_type %s must be the same as y_type %s.' % (self.name, x_type, y_type))
return x_type
def infer_value(self, cond, x, y):
if cond is not None and x is not None and y is not None:
cond = cond.asnumpy()
x = x.asnumpy()
y = y.asnumpy()
out = np.where(cond, x, y)
return Tensor(out)
return None
def _compute_slicing_length(begin, end, stride, x_shape, i):
"""Computes the length of the slicing."""
if i >= len(x_shape):
raise ValueError(f"For 'StridedSlice', When their is no new axis, the index length must be less or "
f"equal than the dim of x.")
x_dim = x_shape[i]
if stride > 0:
# When slicing forward, convert begin and end to positive numbers.
if begin >= x_dim or end < -x_dim:
# When slicing forward, if begin >= x_dim or end < -x_dim, the length of the slicing is 0.
slicing_length = 0
else:
if -x_dim <= begin < 0:
begin += x_dim
if begin < -x_dim:
# When slicing forward, if begin < -x_dim, set begin = 0, which means start from the 0th element.
begin = 0
if -x_dim <= end < 0:
end += x_dim
if end > x_dim:
# When slicing forward, if end > x_dim, set end = x_dims, which means slice to the last element.
end = x_dim
if begin >= end:
# When slicing forward, if begin >= end, the length of the slicing is 0.
slicing_length = 0
else:
slicing_length = 1 + (end - 1 - begin) // stride
else:
# When slicing backward, convert begin and end to negative numbers.
if begin < -x_dim or end >= x_dim:
# When slicing backward, if begin < -x_dim or end >= x_dim, the length of the slicing is 0.
slicing_length = 0
else:
if 0 <= begin < x_dim:
begin += -x_dim
if begin >= x_dim:
begin = -1
if 0 <= end < x_dim:
end += -x_dim
if end < -x_dim - 1:
# Slicing to the 0th element.
end = -x_dim - 1
if begin <= end:
slicing_length = 0
else:
slicing_length = 1 + (end + 1 - begin) // stride
return slicing_length
[docs]class StridedSlice(PrimitiveWithInfer):
r"""
Extracts a strided slice of a tensor.
Given an input tensor, this operation inserts a dimension of length 1 at the dimension.
This operation extracts a fragment of size (end-begin)/stride from the given 'input_tensor'.
Starting from the beginning position, the fragment continues adding stride to the index until
all dimensions are not less than the ending position.
Given a `input_x[m1, m2, ..., mn]`, `begin`, `end` and `strides` will be vectors of length n.
In each mask field (`begin_mask`, `end_mask`, `ellipsis_mask`, `new_axis_mask`, `shrink_axis_mask`)
the ith bit will correspond to the ith m.
If the ith bit of `begin_mask` is set, `begin[i]` is ignored and the fullest possible range in that dimension
is used instead. `end_mask` is analogous, except with the end range.
As for a 5*6*7 tensor, `x[2:,:3,:]` is equivalent to `x[2:5,0:3,0:7]`.
If the ith bit of `ellipsis_mask` is set, as many unspecified dimensions as needed will be inserted between
other dimensions. Only one non-zero bit is allowed in `ellipsis_mask`.
As for a 5*6*7*8 tensor, `x[2:,...,:6]` is equivalent to `x[2:5,:,:,0:6]`.
`x[2:,...]` is equivalent to `x[2:5,:,:,:]`.
If the ith bit of `new_axis_mask` is set, `begin`, `end` and `strides` are ignored and a new length 1
dimension is added at the specified position in tthe output tensor.
As for a 5*6*7 tensor, `x[:2, newaxis, :6]` will produce a tensor with shape (2, 1, 7).
If the ith bit of `shrink_axis_mask` is set, ith size shrinks the dimension by 1, taking on the value
at index `begin[i]`, `end[i]` and `strides[i]` are ignored.
As for a 5*6*7 tensor, `x[:, 5, :]` will result in `shrink_axis_mask` equal to 4.
Note:
The stride may be negative value, which causes reverse slicing.
The shape of `begin`, `end` and `strides` must be the same.
`begin` and `end` are zero-indexed. The element of `strides` must be non-zero.
Args:
begin_mask (int): Starting index of the slice. Default: 0.
end_mask (int): Ending index of the slice. Default: 0.
ellipsis_mask (int): An int mask. Default: 0.
new_axis_mask (int): An int mask. Default: 0.
shrink_axis_mask (int): An int mask. Default: 0.
Inputs:
- **input_x** (Tensor) - The input Tensor.
- **begin** (tuple[int]) - A tuple which represents the location where to start. Only
constant value is allowed.
- **end** (tuple[int]) - A tuple or which represents the maximum location where to end.
Only constant value is allowed.
- **strides** (tuple[int]) - A tuple which represents the stride is continuously added
before reaching the maximum location. Only constant value is allowed.
Outputs:
Tensor, The output is explained by following example.
In the 0th dimension, begin is 1, end is 2, and strides is 1,
because :math:`1+1=2\geq2`, the interval is :math:`[1,2)`.
Thus, return the element with :math:`index = 1` in 0th dimension, i.e., [[3, 3, 3], [4, 4, 4]].
In the 1st dimension, similarly, the interval is :math:`[0,1)`.
Based on the return value of the 0th dimension, return the element with :math:`index = 0`,
i.e., [3, 3, 3].
In the 2nd dimension, similarly, the interval is :math:`[0,3)`.
Based on the return value of the 1st dimension, return the element with :math:`index = 0,1,2`,
i.e., [3, 3, 3].
Finally, the output is [3, 3, 3].
Raises:
TypeError: If `begin_mask`, `end_mask`, `ellipsis_mask`, `new_axis_mask` or `shrink_axis_mask` is not an int.
TypeError: If `begin`, `end` or `strides` is not a tuple.
ValueError: If `begin_mask`, `end_mask`, `ellipsis_mask`, `new_axis_mask` or `shrink_axis_mask` is less than 0.
Supported Platforms:
``Ascend`` ``GPU`` ``CPU``
Examples:
>>> input_x = Tensor([[[1, 1, 1], [2, 2, 2]], [[3, 3, 3], [4, 4, 4]],
... [[5, 5, 5], [6, 6, 6]]], mindspore.float32)
>>> slice = ops.StridedSlice()
>>> output = slice(input_x, (1, 0, 0), (2, 1, 3), (1, 1, 1))
>>> print(output)
[[[3. 3. 3.]]]
"""
@prim_attr_register
def __init__(self,
begin_mask=0,
end_mask=0,
ellipsis_mask=0,
new_axis_mask=0,
shrink_axis_mask=0):
"""Initialize StridedSlice"""
self.init_prim_io_names(inputs=['x', 'begin', 'end', 'strides'], outputs=['output'])
validator.check_non_negative_int(begin_mask, 'begin_mask', self.name)
validator.check_non_negative_int(end_mask, 'end_mask', self.name)
validator.check_non_negative_int(ellipsis_mask, 'ellipsis_mask', self.name)
if len(tuple(filter(lambda x: x == '1', bin(ellipsis_mask)[-1:1:-1]))) > 1:
raise ValueError(f"For '{self.name}', only support one ellipsis in the index, but got {end_mask}.")
validator.check_non_negative_int(new_axis_mask, 'new_axis_mask', self.name)
validator.check_non_negative_int(shrink_axis_mask, 'shrink_axis_mask', self.name)
def __infer__(self, x, begin, end, strides):
begin_v, end_v, strides_v = begin['value'], end['value'], strides['value']
validator.check_value_type("begin", begin_v, [tuple], self.name)
validator.check_value_type("end", end_v, [tuple], self.name)
validator.check_value_type("strides", strides_v, [tuple], self.name)
if tuple(filter(lambda x: not isinstance(x, int), begin_v + end_v + strides_v)):
raise TypeError(f"For {self.name}, both the begins, ends, and strides must be a tuple of int, "
f"but got begins: {begin_v}, ends: {end_v}, strides: {strides_v}.")
if tuple(filter(lambda x: x == 0, strides_v)):
raise ValueError(f"For '{self.name}', the strides cannot contain 0, but got strides: {strides_v}.")
if len(end_v) != len(begin_v) or len(strides_v) != len(begin_v):
raise ValueError(f"For '{self.name}' the length of begin index: {begin_v}, end index: {end_v} and "
f"strides: {strides_v} must be equal.")
ret_shape = self._compute_slicing_shape(x['shape'], begin_v, end_v, strides_v)
if all(ret_shape):
value = None
else:
init_func = Zero()
init_func.__enable_zero_dim__ = True
value = Tensor(dtype=x['dtype'].element_type(), shape=ret_shape, init=init_func)
if "max_value" in x and "min_value" in x:
validator.check_value_type("min_value", x["min_value"], [tuple, list], self.name)
validator.check_value_type("max_value", x["max_value"], [tuple, list], self.name)
max_value_np = np.array(x["max_value"])
min_value_np = np.array(x["min_value"])
slice_index = []
for begin_i, end_i, strides_i in zip(begin_v, end_v, strides_v):
s = slice(begin_i, end_i, strides_i)
slice_index.append(s)
slice_index = tuple(slice_index)
max_value_slice = max_value_np[slice_index]
min_value_slice = min_value_np[slice_index]
max_value_slice = tuple(max_value_slice.tolist())
min_value_slice = tuple(min_value_slice.tolist())
return {'shape': ret_shape,
'dtype': x['dtype'],
'value': value,
'max_value': max_value_slice,
'min_value': min_value_slice}
return {'shape': ret_shape,
'dtype': x['dtype'],
'value': value}
def _compute_slicing_shape(self, x_shape, begin_v, end_v, strides_v):
"""Computes the shape of the slicing."""
x_rank = len(x_shape)
slice_len = len(begin_v)
# After the integer is converted to binary, it is a str and the first two chars are the flag char '0b'.
begin_pos = bin(self.begin_mask)[-1:1:-1]
end_pos = bin(self.end_mask)[-1:1:-1]
ellipsis_pos = bin(self.ellipsis_mask)[-1:1:-1]
new_axis_pos = bin(self.new_axis_mask)[-1:1:-1]
shrink_axis_pos = bin(self.shrink_axis_mask)[-1:1:-1]
ret_shape = []
i, j = 0, 0
has_ellipsis = False
while i < x_rank or j < slice_len:
if j < slice_len:
begin, end, stride = begin_v[j], end_v[j], strides_v[j]
if j < len(ellipsis_pos) and ellipsis_pos[j] == '1':
# When there is ellipsis, the latter part of the ellipsis will be processed separately.
has_ellipsis = True
break
if j < len(begin_pos) and begin_pos[j] == '1':
begin = -1 if strides_v[j] < 0 else 0
if j < len(end_pos) and end_pos[j] == '1':
end = -(x_shape[i] + 1) if strides_v[j] < 0 else x_shape[i]
if j < len(new_axis_pos) and new_axis_pos[j] == '1':
ret_shape.append(1)
j += 1
continue
if j < len(shrink_axis_pos) and shrink_axis_pos[j] == '1':
if (not -x_shape[i] <= begin < x_shape[i]) or stride < 0:
raise IndexError(f"For {self.name}, when shrink axis, the stride cannot be negative number, "
f"and begin should be in [-{x_shape[i]}, {x_shape[i]}), "
f"but got stride: {stride}, begin: {begin}.")
j += 1
i += 1
continue
else:
begin, end, stride = 0, x_shape[i], 1
slicing_length = _compute_slicing_length(begin, end, stride, x_shape, i)
ret_shape.append(slicing_length)
i += 1
j += 1
if has_ellipsis:
# When there is ellipsis, handle the second half of the ellipsis split.
ellipsis_occupied_dims = x_rank - i - (slice_len - (j + 1)) + \
len(tuple(filter(lambda x: x == '1', new_axis_pos[j + 1:slice_len])))
ret_shape.extend(x_shape[i:i + ellipsis_occupied_dims])
j += 1
i += ellipsis_occupied_dims
while i < x_rank or j < slice_len:
begin, end, stride = begin_v[j], end_v[j], strides_v[j]
if j < len(begin_pos) and begin_pos[j] == '1':
begin = -1 if strides_v[j] < 0 else 0
if j < len(end_pos) and end_pos[j] == '1':
end = -(x_shape[i] + 1) if strides_v[j] < 0 else x_shape[i]
if j < len(new_axis_pos) and new_axis_pos[j] == '1':
ret_shape.append(1)
j += 1
continue
if j < len(shrink_axis_pos) and shrink_axis_pos[j] == '1':
if (not -x_shape[i] <= begin < x_shape[i]) or stride < 0:
raise ValueError(f"For {self.name}, when shrink axis, the stride cannot be negative number, "
f"and begin should be in [-{x_shape[i]}, {x_shape[i]}), "
f"but got stride: {stride}, begin: {begin}.")
j += 1
i += 1
continue
slicing_length = _compute_slicing_length(begin, end, stride, x_shape, i)
ret_shape.append(slicing_length)
i += 1
j += 1
return ret_shape
class Diag(PrimitiveWithInfer):
r"""
Constructs a diagonal tensor with a given diagonal values.
Assume `input_x` has dimensions :math:`[D_1,... D_k]`, the output is a tensor of
rank 2k with dimensions :math:`[D_1,..., D_k, D_1,..., D_k]` where:
:math:`output[i_1,..., i_k, i_1,..., i_k] = input_x[i_1,..., i_k]` and 0 everywhere else.
Inputs:
- **input_x** (Tensor) - The input tensor. The input shape must be less than 5d.
Outputs:
Tensor, has the same dtype as the `input_x`.
Examples:
>>> input_x = Tensor([1, 2, 3, 4])
>>> diag = ops.Diag()
>>> output = diag(input_x)
>>> print(output)
[[1, 0, 0, 0],
[0, 2, 0, 0],
[0, 0, 3, 0],
[0, 0, 0, 4]]
"""
@prim_attr_register
def __init__(self):
"""Initialize Diag"""
def infer_dtype(self, x_type):
validator.check_subclass('input_x', x_type, mstype.tensor, self.name)
return x_type
def infer_shape(self, x_shape):
validator.check("x rank", len(x_shape), "", 1, Rel.GE)
ret_shape = copy.deepcopy(x_shape)
ret_shape = ret_shape + ret_shape
return ret_shape
def infer_value(self, x):
if x is None:
return None
# do constant-folding only when x rank is 1
if len(x.shape) != 1:
return None
ret = np.diag(x.asnumpy())
return Tensor(ret)
class DiagPart(PrimitiveWithInfer):
r"""
Extracts the diagonal part from given tensor.
Assume input has dimensions :math:`[D_1,..., D_k, D_1,..., D_k]`, the output is a tensor
of rank k with dimensions :math:`[D_1,..., D_k]` where:
:math:`output[i_1,..., i_k] = input[i_1,..., i_k, i_1,..., i_k]`.
Inputs:
- **input_x** (Tensor) - tensor of rank k where k is even and not zero.
Outputs:
Tensor, the extracted diagonal has the same dtype as the `input_x`.
Examples
>>> input_x = Tensor([[1, 0, 0, 0],
... [0, 2, 0, 0],
... [0, 0, 3, 0],
... [0, 0, 0, 4]])
>>> diag_part = ops.DiagPart()
>>> output = diag_part(input_x)
>>> print(output)
[1 2 3 4]
"""
@prim_attr_register
def __init__(self):
"""Initialize DiagPart"""
def infer_dtype(self, x_type):
validator.check_subclass('input_x', x_type, mstype.tensor, self.name)
return x_type
def infer_shape(self, x_shape):
if len(x_shape) % 2 != 0 or \
not x_shape:
raise ValueError(f"For \'{self.name}\' input rank must be non-zero and even, but got rank {len(x_shape)}, "
f"with shapes {x_shape}")
length = len(x_shape) // 2
for i in range(length):
validator.check('input_shape[i + len(input_shape)/2]', x_shape[i + length],
'input_shape[i]', x_shape[i], Rel.EQ, self.name)
ret_shape = x_shape[0:length]
return ret_shape
def infer_value(self, x):
if x is None:
return None
# do constant-folding only when x rank is 2
if len(x.shape) != 2:
return None
ret = np.diag(x.asnumpy())
return Tensor(ret)
[docs]class Eye(PrimitiveWithInfer):
"""
Creates a tensor with ones on the diagonal and zeros the rest.
Inputs:
- **n** (int) - The number of rows of returned tensor
- **m** (int) - The number of columns of returned tensor
- **t** (mindspore.dtype) - MindSpore's dtype, The data type of the returned tensor.
Outputs:
Tensor, a tensor with ones on the diagonal and the rest of elements are zero.
Raises:
TypeError: If `m` or `n` is not an int.
ValueError: If `m` or `n` is less than 1.
Supported Platforms:
``Ascend`` ``GPU`` ``CPU``
Examples:
>>> eye = ops.Eye()
>>> output = eye(2, 2, mindspore.int32)
>>> print(output)
[[1 0]
[0 1]]
"""
@prim_attr_register
def __init__(self):
"""Initialize Eye"""
def infer_value(self, n, m, t):
validator.check_positive_int(n, "n", self.name)
validator.check_positive_int(m, "m", self.name)
args = {"dtype": t}
validator.check_types_same_and_valid(args, mstype.number_type + (mstype.bool_,), self.name)
np_type = mstype.dtype_to_nptype(t)
ret = np.eye(n, m, dtype=np_type)
return Tensor(ret)
[docs]class ScatterNd(PrimitiveWithInfer):
r"""
Scatters a tensor into a new tensor depending on the specified indices.
Creates an empty tensor with the given `shape`, and set values by scattering the update tensor
depending on indices.
The empty tensor has rank P and `indices` has rank Q where `Q >= 2`.
`indices` has shape :math:`(i_0, i_1, ..., i_{Q-2}, N)` where `N <= P`.
The last dimension of `indices` (with length `N` ) indicates slices along the `N` th dimension of the empty tensor.
`updates` is a tensor of rank `Q-1+P-N`. Its shape is: :math:`(i_0, i_1, ..., i_{Q-2}, shape_N, ..., shape_{P-1})`.
Inputs:
- **indices** (Tensor) - The index of scattering in the new tensor with int32 data type.
The rank of indices must be at least 2 and `indices_shape[-1] <= len(shape)`.
- **updates** (Tensor) - The source Tensor to be scattered.
It has shape `indices_shape[:-1] + shape[indices_shape[-1]:]`.
- **shape** (tuple[int]) - Define the shape of the output tensor, has the same type as indices.
Outputs:
Tensor, the new tensor, has the same type as `update` and the same shape as `shape`.
Raises:
TypeError: If `shape` is not a tuple.
ValueError: If any element of `shape` is less than 1.
Supported Platforms:
``Ascend`` ``GPU``
Examples:
>>> op = ops.ScatterNd()
>>> indices = Tensor(np.array([[0, 1], [1, 1]]), mindspore.int32)
>>> updates = Tensor(np.array([3.2, 1.1]), mindspore.float32)
>>> shape = (3, 3)
>>> output = op(indices, updates, shape)
>>> print(output)
[[0. 3.2 0. ]
[0. 1.1 0. ]
[0. 0. 0. ]]
"""
@prim_attr_register
def __init__(self):
"""Initialize ScatterNd"""
self.init_prim_io_names(inputs=['indices', 'update', 'shape'], outputs=['output'])
def __infer__(self, indices, update, shape):
shp = shape['value']
validator.check_subclass("update_dtype", update['dtype'], mstype.tensor, self.name)
validator.check_tensor_dtype_valid("indices", indices['dtype'], [mstype.int32, mstype.int64], self.name)
validator.check_value_type("shape", shp, [tuple], self.name)
for i, x in enumerate(shp):
validator.check_positive_int(x, f'shape[{i}]', self.name)
indices_shape, update_shape = indices["shape"], update["shape"]
if indices_shape[0] != update_shape[0]:
raise ValueError(f'For \'{self.name}\' The indices_shape[0] and update_shape[0] must be equal.')
return {'shape': shp,
'dtype': update['dtype'],
'value': None}
[docs]class ResizeNearestNeighbor(PrimitiveWithInfer):
r"""
Resizes the input tensor by using the nearest neighbor algorithm.
Resizes the input tensor to a given size by using the nearest neighbor algorithm. The nearest
neighbor algorithm selects the value of the nearest point and does not consider the
values of neighboring points at all, yielding a piecewise-constant interpolant.
Args:
size (Union[tuple, list]): The target size. The dimension of size must be 2.
align_corners (bool): Whether the centers of the 4 corner pixels of the input
and output tensors are aligned. Default: False.
Inputs:
- **input_x** (Tensor) - The input tensor. The shape of the tensor is :math:`(N, C, H, W)`.
Outputs:
Tensor, the shape of the output tensor is :math:`(N, C, NEW\_H, NEW\_W)`.
Raises:
TypeError: If `size` is neither tuple nor list.
TypeError: If `align_corners` is not a bool.
ValueError: If length of `size` is not equal to 2.
Supported Platforms:
``Ascend`` ``GPU`` ``CPU``
Examples:
>>> input_tensor = Tensor(np.array([[[[-0.1, 0.3, 3.6], [0.4, 0.5, -3.2]]]]), mindspore.float32)
>>> resize = ops.ResizeNearestNeighbor((2, 2))
>>> output = resize(input_tensor)
>>> print(output)
[[[[-0.1 0.3]
[ 0.4 0.5]]]]
"""
@prim_attr_register
def __init__(self, size, align_corners=False):
"""Initialize ResizeNearestNeighbor"""
validator.check_value_type("size", size, [tuple, list], self.name)
validator.check_value_type("align_corners", align_corners, [bool], self.name)
validator.check_equal_int(len(size), 2, "length of size", self.name)
for i, value in enumerate(size):
validator.check_non_negative_int(value, f'{i}th value of size', self.name)
self.init_prim_io_names(inputs=['image_in'], outputs=['image_out'])
def infer_shape(self, x_shape):
validator.check('the dimension of input_x', len(x_shape), '', 4, Rel.EQ, self.name)
return tuple(x_shape)[:-2] + tuple(self.size)
def infer_dtype(self, x_dtype):
validator.check_tensor_dtype_valid("x", x_dtype, mstype.number_type, self.name)
return x_dtype
[docs]class GatherNd(PrimitiveWithInfer):
r"""
Gathers slices from a tensor by indices.
Using given indices to gather slices from a tensor with a specified shape.
`indices` is an K-dimensional integer tensor. Supposes it as a (K-1)-dimensional tensor and each element of it
defines a slice of `input_x`:
.. math::
output[(i_0, ..., i_{K-2})] = input\_x[indices[(i_0, ..., i_{K-2})]]
The last dimension of `indices` can not more than the rank of `input_x`:
:math:`indices.shape[-1] <= input\_x.rank`.
Inputs:
- **input_x** (Tensor) - The target tensor to gather values.
- **indices** (Tensor) - The index tensor, with int data type.
Outputs:
Tensor, has the same type as `input_x` and the shape is indices_shape[:-1] + x_shape[indices_shape[-1]:].
Raises:
ValueError: If length of shape of `input_x` is less than the last dimension of `indices`.
Supported Platforms:
``Ascend`` ``GPU`` ``CPU``
Examples:
>>> input_x = Tensor(np.array([[-0.1, 0.3, 3.6], [0.4, 0.5, -3.2]]), mindspore.float32)
>>> indices = Tensor(np.array([[0, 0], [1, 1]]), mindspore.int32)
>>> op = ops.GatherNd()
>>> output = op(input_x, indices)
>>> print(output)
[-0.1 0.5]
"""
@prim_attr_register
def __init__(self):
"""Initialize GatherNd"""
self.init_prim_io_names(inputs=['input_x', 'indices'], outputs=['y'])
def infer_shape(self, x_shape, indices_shape):
validator.check('the dimension of x', len(x_shape),
'the dimension of indices', indices_shape[-1], Rel.GE, self.name)
return indices_shape[:-1] + x_shape[indices_shape[-1]:]
def infer_dtype(self, x_dtype, indices_dtype):
validator.check_tensor_dtype_valid("indices", indices_dtype, mstype.int_type, self.name)
return x_dtype
[docs]class TensorScatterUpdate(PrimitiveWithInfer):
"""
Creates a new tensor by updating the positions in `input_x` indicicated by
`indices`, with values from `update`. This operation is almost equivalent to using
ScatterNd, except that the updates are applied on `input_x` instead of a zero tensor.
`indices` must have rank at least 2, the last axis is the depth of each index
vectors. For each index vector, there must be a corresponding value in `update`. If
the depth of each index tensor matches the rank of `input_x`, then each index
vector corresponds to a scalar in `input_x` and each update updates a scalar. If
the depth of each index tensor is less than the rank of `input_x`, then each index
vector corresponds to a slice in `input_x`, and each update updates a slice.
The order in which updates are applied is nondeterministic, meaning that if there
are multiple index vectors in `indices` that correspond to the same position, the
value of that position in the output will be nondeterministic.
Inputs:
- **input_x** (Tensor) - The target tensor. The dimension of input_x must be no less than indices.shape[-1].
- **indices** (Tensor) - The index of input tensor whose data type is int32 or int64.
The rank must be at least 2.
- **update** (Tensor) - The tensor to update the input tensor, has the same type as input,
and update.shape = indices.shape[:-1] + input_x.shape[indices.shape[-1]:].
Outputs:
Tensor, has the same shape and type as `input_x`.
Raises:
TypeError: If dtype of `indices` is neither int32 nor int64.
ValueError: If length of shape of `input_x` is less than the last dimension of shape of `indices`.
Supported Platforms:
``Ascend`` ``GPU``
Examples:
>>> input_x = Tensor(np.array([[-0.1, 0.3, 3.6], [0.4, 0.5, -3.2]]), mindspore.float32)
>>> indices = Tensor(np.array([[0, 0], [1, 1]]), mindspore.int32)
>>> update = Tensor(np.array([1.0, 2.2]), mindspore.float32)
>>> op = ops.TensorScatterUpdate()
>>> output = op(input_x, indices, update)
>>> print(output)
[[ 1. 0.3 3.6]
[ 0.4 2.2 -3.2]]
"""
@prim_attr_register
def __init__(self):
"""Initialize TensorScatterUpdate"""
self.init_prim_io_names(inputs=['x', 'indices', 'value'], outputs=['y'])
def infer_shape(self, x_shape, indices_shape, value_shape):
validator.check('the dimension of x', len(x_shape),
'the dimension of indices', indices_shape[-1], Rel.GE)
if indices_shape[:-1] + x_shape[indices_shape[-1]:] != value_shape:
raise ValueError("For 'TensorScatterUpdate', input value are not match with input indices.")
return x_shape
def infer_dtype(self, x_dtype, indices_dtype, value_dtype):
validator.check_tensor_dtype_valid('indices', indices_dtype, [mstype.int32, mstype.int64], self.name)
args = {"x": x_dtype, "value": value_dtype}
validator.check_tensors_dtypes_same_and_valid(args, (mstype.bool_,) + mstype.number_type, self.name)
return x_dtype
[docs]class ScatterUpdate(_ScatterOpDynamic):
r"""
Updates tensor values by using input indices and value.
Using given values to update tensor value, along with the input indices.
for each `i, ..., j` in `indices.shape`:
.. math::
\text{input_x}[\text{indices}[i, ..., j], :] = \text{updates}[i, ..., j, :]
Inputs of `input_x` and `updates` comply with the implicit type conversion rules to make the data types consistent.
If they have different data types, lower priority data type will be converted to
relatively highest priority data type.
RuntimeError exception will be thrown when the data type conversion of Parameter is required.
Args:
use_locking (bool): Whether protect the assignment by a lock. Default: True.
Inputs:
- **input_x** (Parameter) - The target tensor, with data type of Parameter.
- **indices** (Tensor) - The index of input tensor. With int32 data type.
If there are duplicates in indices, the order for updating is undefined.
- **updates** (Tensor) - The tensor to update the input tensor, has the same type as input,
and updates.shape = indices.shape + input_x.shape[1:].
Outputs:
Tensor, has the same shape and type as `input_x`.
Raises:
TypeError: If `use_locking` is not a bool.
Supported Platforms:
``Ascend`` ``GPU``
Examples:
>>> np_x = np.array([[-0.1, 0.3, 3.6], [0.4, 0.5, -3.2]])
>>> input_x = mindspore.Parameter(Tensor(np_x, mindspore.float32), name="x")
>>> indices = Tensor(np.array([0, 1]), mindspore.int32)
>>> np_updates = np.array([[2.0, 1.2, 1.0], [3.0, 1.2, 1.0]])
>>> updates = Tensor(np_updates, mindspore.float32)
>>> op = ops.ScatterUpdate()
>>> output = op(input_x, indices, updates)
>>> print(output)
[[2. 1.2 1. ]
[3. 1.2 1. ]]
"""
@prim_attr_register
def __init__(self, use_locking=True):
"""Initialize ScatterUpdate"""
validator.check_value_type('use_locking', use_locking, [bool], self.name)
self.init_prim_io_names(inputs=['x', 'indices', 'updates'], outputs=['y'])
self.add_prim_attr('side_effect_mem', True)
[docs]class ScatterNdUpdate(_ScatterNdOp):
r"""
Updates tensor values by using input indices and value.
Using given values to update tensor value, along with the input indices.
`input_x` has rank P and `indices` has rank Q where `Q >= 2`.
`indices` has shape :math:`(i_0, i_1, ..., i_{Q-2}, N)` where `N <= P`.
The last dimension of `indices` (with length `N` ) indicates slices along the `N` th dimension of `input_x`.
`updates` is a tensor of rank `Q-1+P-N`. Its shape is:
:math:`(i_0, i_1, ..., i_{Q-2}, x\_shape_N, ..., x\_shape_{P-1})`.
Inputs of `input_x` and `updates` comply with the implicit type conversion rules to make the data types consistent.
If they have different data types, lower priority data type will be converted to
relatively highest priority data type.
RuntimeError exception will be thrown when the data type conversion of Parameter is required.
Args:
use_locking (bool): Whether protect the assignment by a lock. Default: True.
Inputs:
- **input_x** (Parameter) - The target tensor, with data type of Parameter.
- **indices** (Tensor) - The index of input tensor, with int32 data type.
The rank of indices must be at least 2 and `indices_shape[-1] <= len(shape)`.
- **updates** (Tensor) - The tensor to be updated to the input tensor, has the same type as input.
The shape is `indices_shape[:-1] + x_shape[indices_shape[-1]:]`.
Outputs:
Tensor, has the same shape and type as `input_x`.
Raises:
TypeError: If `use_locking` is not a bool.
Supported Platforms:
``Ascend`` ``CPU``
Examples:
>>> np_x = np.array([[-0.1, 0.3, 3.6], [0.4, 0.5, -3.2]])
>>> input_x = mindspore.Parameter(Tensor(np_x, mindspore.float32), name="x")
>>> indices = Tensor(np.array([[0, 0], [1, 1]]), mindspore.int32)
>>> updates = Tensor(np.array([1.0, 2.2]), mindspore.float32)
>>> op = ops.ScatterNdUpdate()
>>> output = op(input_x, indices, updates)
>>> print(output)
[[1. 0.3 3.6]
[0.4 2.2 -3.2]]
"""
@prim_attr_register
def __init__(self, use_locking=True):
"""Initialize ScatterNdUpdate"""
validator.check_value_type('use_locking', use_locking, [bool], self.name)
self.init_prim_io_names(inputs=['x', 'indices', 'value'], outputs=['y'])
self.add_prim_attr('side_effect_mem', True)
def infer_dtype(self, x_dtype, indices_dtype, value_dtype):
validator.check_tensor_dtype_valid('indices', indices_dtype, [mstype.int32], self.name)
args = {"x": x_dtype, "value": value_dtype}
validator.check_tensors_dtypes_same_and_valid(args, (mstype.bool_,) + mstype.number_type, self.name)
return x_dtype
[docs]class ScatterMax(_ScatterOp):
r"""
Updates the value of the input tensor through the maximum operation.
Using given values to update tensor value through the max operation, along with the input indices.
This operation outputs the `input_x` after the update is done, which makes it convenient to use the updated value.
for each `i, ..., j` in `indices.shape`:
.. math::
\text{input_x}[\text{indices}[i, ..., j], :]
= max(\text{input_x}[\text{indices}[i, ..., j], :], \text{updates}[i, ..., j, :])
Inputs of `input_x` and `updates` comply with the implicit type conversion rules to make the data types consistent.
If they have different data types, lower priority data type will be converted to
relatively highest priority data type.
RuntimeError exception will be thrown when the data type conversion of Parameter is required.
Args:
use_locking (bool): Whether protect the assignment by a lock. Default: True.
Inputs:
- **input_x** (Parameter) - The target parameter.
- **indices** (Tensor) - The index to do max operation whose data type must be mindspore.int32.
- **updates** (Tensor) - The tensor that performs the maximum operation with `input_x`,
the data type is the same as `input_x`, the shape is `indices_shape + x_shape[1:]`.
Outputs:
Parameter, the updated `input_x`.
Raises:
TypeError: If `use_locking` is not a bool.
Supported Platforms:
``Ascend``
Examples:
>>> input_x = Parameter(Tensor(np.array([[1.0, 2.0, 3.0], [4.0, 5.0, 6.0]]), mindspore.float32),
... name="input_x")
>>> indices = Tensor(np.array([[0, 0], [1, 1]]), mindspore.int32)
>>> updates = Tensor(np.ones([2, 2, 3]) * 88, mindspore.float32)
>>> scatter_max = ops.ScatterMax()
>>> output = scatter_max(input_x, indices, updates)
>>> print(output)
[[88. 88. 88.]
[88. 88. 88.]]
"""
[docs]class ScatterMin(_ScatterOp):
r"""
Updates the value of the input tensor through the minimum operation.
Using given values to update tensor value through the min operation, along with the input indices.
This operation outputs the `input_x` after the update is done, which makes it convenient to use the updated value.
for each `i, ..., j` in `indices.shape`:
.. math::
\text{input_x}[\text{indices}[i, ..., j], :]
= min(\text{input_x}[\text{indices}[i, ..., j], :], \text{updates}[i, ..., j, :])
Inputs of `input_x` and `updates` comply with the implicit type conversion rules to make the data types consistent.
If they have different data types, lower priority data type will be converted to
relatively highest priority data type.
RuntimeError exception will be thrown when the data type conversion of Parameter is required.
Args:
use_locking (bool): Whether protect the assignment by a lock. Default: False.
Inputs:
- **input_x** (Parameter) - The target parameter.
- **indices** (Tensor) - The index to do min operation whose data type must be mindspore.int32.
- **updates** (Tensor) - The tensor doing the min operation with `input_x`,
the data type is same as `input_x`, the shape is `indices_shape + x_shape[1:]`.
Outputs:
Parameter, the updated `input_x`.
Raises:
TypeError: If `use_locking` is not a bool.
Supported Platforms:
``Ascend``
Examples:
>>> input_x = Parameter(Tensor(np.array([[0.0, 1.0, 2.0], [0.0, 0.0, 0.0]]), mindspore.float32),
... name="input_x")
>>> indices = Tensor(np.array([[0, 0], [1, 1]]), mindspore.int32)
>>> update = Tensor(np.ones([2, 2, 3]), mindspore.float32)
>>> scatter_min = ops.ScatterMin()
>>> output = scatter_min(input_x, indices, update)
>>> print(output)
[[0. 1. 1.]
[0. 0. 0.]]
"""
[docs]class ScatterAdd(_ScatterOpDynamic):
r"""
Updates the value of the input tensor through the addition operation.
Using given values to update tensor value through the add operation, along with the input indices.
This operation outputs the `input_x` after the update is done, which makes it convenient to use the updated value.
for each `i, ..., j` in `indices.shape`:
.. math::
\text{input_x}[\text{indices}[i, ..., j], :] \mathrel{+}= \text{updates}[i, ..., j, :]
Inputs of `input_x` and `updates` comply with the implicit type conversion rules to make the data types consistent.
If they have different data types, lower priority data type will be converted to
relatively highest priority data type.
RuntimeError exception will be thrown when the data type conversion of Parameter is required.
Args:
use_locking (bool): Whether protect the assignment by a lock. Default: False.
Inputs:
- **input_x** (Parameter) - The target parameter.
- **indices** (Tensor) - The index to do add operation whose data type must be mindspore.int32.
- **updates** (Tensor) - The tensor that performs the add operation with `input_x`,
the data type is the same as `input_x`, the shape is `indices_shape + x_shape[1:]`.
Outputs:
Parameter, the updated `input_x`.
Raises:
TypeError: If `use_locking` is not a bool.
Supported Platforms:
``Ascend`` ``GPU``
Examples:
>>> input_x = Parameter(Tensor(np.array([[0.0, 0.0, 0.0], [0.0, 0.0, 0.0]]), mindspore.float32), name="x")
>>> indices = Tensor(np.array([[0, 1], [1, 1]]), mindspore.int32)
>>> updates = Tensor(np.ones([2, 2, 3]), mindspore.float32)
>>> scatter_add = ops.ScatterAdd()
>>> output = scatter_add(input_x, indices, updates)
>>> print(output)
[[1. 1. 1.]
[3. 3. 3.]]
"""
@prim_attr_register
def __init__(self, use_locking=False):
"""Initialize ScatterAdd"""
validator.check_value_type('use_locking', use_locking, [bool], self.name)
self.init_prim_io_names(inputs=['x', 'indices', 'updates'], outputs=['y'])
self.add_prim_attr('side_effect_mem', True)
[docs]class ScatterSub(_ScatterOp):
r"""
Updates the value of the input tensor through the subtraction operation.
Using given values to update tensor value through the subtraction operation, along with the input indices.
This operation outputs the `input_x` after the update is done, which makes it convenient to use the updated value.
for each `i, ..., j` in `indices.shape`:
.. math::
\text{input_x}[\text{indices}[i, ..., j], :] \mathrel{-}= \text{updates}[i, ..., j, :]
Inputs of `input_x` and `updates` comply with the implicit type conversion rules to make the data types consistent.
If they have different data types, lower priority data type will be converted to
relatively highest priority data type.
RuntimeError exception will be thrown when the data type conversion of Parameter is required.
Args:
use_locking (bool): Whether protect the assignment by a lock. Default: False.
Inputs:
- **input_x** (Parameter) - The target parameter.
- **indices** (Tensor) - The index to perform the subtraction operation
whose data type must be mindspore.int32.
- **updates** (Tensor) - The tensor that performs the subtraction operation with `input_x`,
the data type is the same as `input_x`, the shape is `indices_shape + x_shape[1:]`.
Outputs:
Parameter, the updated `input_x`.
Raises:
TypeError: If `use_locking` is not a bool.
Supported Platforms:
``Ascend``
Examples:
>>> input_x = Parameter(Tensor(np.array([[0.0, 0.0, 0.0], [1.0, 1.0, 1.0]]), mindspore.float32), name="x")
>>> indices = Tensor(np.array([[0, 1]]), mindspore.int32)
>>> updates = Tensor(np.array([[[1.0, 1.0, 1.0], [2.0, 2.0, 2.0]]]), mindspore.float32)
>>> scatter_sub = ops.ScatterSub()
>>> output = scatter_sub(input_x, indices, updates)
>>> print(output)
[[-1. -1. -1.]
[-1. -1. -1.]]
"""
[docs]class ScatterMul(_ScatterOp):
r"""
Updates the value of the input tensor through the multiply operation.
Using given values to update tensor value through the mul operation, along with the input indices.
This operation outputs the `input_x` after the update is done, which makes it convenient to use the updated value.
for each `i, ..., j` in `indices.shape`:
.. math::
\text{input_x}[\text{indices}[i, ..., j], :] \mathrel{*}= \text{updates}[i, ..., j, :]
Inputs of `input_x` and `updates` comply with the implicit type conversion rules to make the data types consistent.
If they have different data types, lower priority data type will be converted to
relatively highest priority data type.
RuntimeError exception will be thrown when the data type conversion of Parameter is required.
Args:
use_locking (bool): Whether protect the assignment by a lock. Default: False.
Inputs:
- **input_x** (Parameter) - The target parameter.
- **indices** (Tensor) - The index to do mul operation whose data type must be mindspore.int32.
- **updates** (Tensor) - The tensor doing the mul operation with `input_x`,
the data type is same as `input_x`, the shape is `indices_shape + x_shape[1:]`.
Outputs:
Parameter, the updated `input_x`.
Raises:
TypeError: If `use_locking` is not a bool.
Supported Platforms:
``Ascend``
Examples:
>>> input_x = Parameter(Tensor(np.array([[1.0, 1.0, 1.0], [2.0, 2.0, 2.0]]), mindspore.float32), name="x")
>>> indices = Tensor(np.array([0, 1]), mindspore.int32)
>>> updates = Tensor(np.array([[2.0, 2.0, 2.0], [2.0, 2.0, 2.0]]), mindspore.float32)
>>> scatter_mul = ops.ScatterMul()
>>> output = scatter_mul(input_x, indices, updates)
>>> print(output)
[[2. 2. 2.]
[4. 4. 4.]]
"""
[docs]class ScatterDiv(_ScatterOp):
r"""
Updates the value of the input tensor through the divide operation.
Using given values to update tensor value through the div operation, along with the input indices.
This operation outputs the `input_x` after the update is done, which makes it convenient to use the updated value.
for each `i, ..., j` in `indices.shape`:
.. math::
\text{input_x}[\text{indices}[i, ..., j], :] \mathrel{/}= \text{updates}[i, ..., j, :]
Inputs of `input_x` and `updates` comply with the implicit type conversion rules to make the data types consistent.
If they have different data types, lower priority data type will be converted to
relatively highest priority data type.
RuntimeError exception will be thrown when the data type conversion of Parameter is required.
Args:
use_locking (bool): Whether protect the assignment by a lock. Default: False.
Inputs:
- **input_x** (Parameter) - The target parameter.
- **indices** (Tensor) - The index to do div operation whose data type must be mindspore.int32.
- **updates** (Tensor) - The tensor that performs the div operation with `input_x`,
the data type is the same as `input_x`, the shape is `indices_shape + x_shape[1:]`.
Outputs:
Parameter, the updated `input_x`.
Raises:
TypeError: If `use_locking` is not a bool.
Supported Platforms:
``Ascend``
Examples:
>>> input_x = Parameter(Tensor(np.array([[6.0, 6.0, 6.0], [2.0, 2.0, 2.0]]), mindspore.float32), name="x")
>>> indices = Tensor(np.array([0, 1]), mindspore.int32)
>>> updates = Tensor(np.array([[2.0, 2.0, 2.0], [2.0, 2.0, 2.0]]), mindspore.float32)
>>> scatter_div = ops.ScatterDiv()
>>> output = scatter_div(input_x, indices, updates)
>>> print(output)
[[3. 3. 3.]
[1. 1. 1.]]
"""
[docs]class ScatterNdAdd(_ScatterNdOp):
r"""
Applies sparse addition to individual values or slices in a tensor.
Using given values to update tensor value through the add operation, along with the input indices.
This operation outputs the `input_x` after the update is done, which makes it convenient to use the updated value.
`input_x` has rank P and `indices` has rank Q where `Q >= 2`.
`indices` has shape :math:`(i_0, i_1, ..., i_{Q-2}, N)` where `N <= P`.
The last dimension of `indices` (with length `N` ) indicates slices along the `N` th dimension of `input_x`.
`updates` is a tensor of rank `Q-1+P-N`. Its shape is:
:math:`(i_0, i_1, ..., i_{Q-2}, x\_shape_N, ..., x\_shape_{P-1})`.
Inputs of `input_x` and `updates` comply with the implicit type conversion rules to make the data types consistent.
If they have different data types, lower priority data type will be converted to
relatively highest priority data type.
RuntimeError exception will be thrown when the data type conversion of Parameter is required.
Args:
use_locking (bool): Whether protect the assignment by a lock. Default: False.
Inputs:
- **input_x** (Parameter) - The target parameter.
- **indices** (Tensor) - The index to do add operation whose data type must be mindspore.int32.
The rank of indices must be at least 2 and `indices_shape[-1] <= len(shape)`.
- **updates** (Tensor) - The tensor doing the add operation with `input_x`,
the data type is same as `input_x`, the shape is `indices_shape[:-1] + x_shape[indices_shape[-1]:]`.
Outputs:
Parameter, the updated `input_x`.
Raises:
TypeError: If `use_locking` is not a bool.
Supported Platforms:
``Ascend``
Examples:
>>> input_x = Parameter(Tensor(np.array([1, 2, 3, 4, 5, 6, 7, 8]), mindspore.float32), name="x")
>>> indices = Tensor(np.array([[2], [4], [1], [7]]), mindspore.int32)
>>> updates = Tensor(np.array([6, 7, 8, 9]), mindspore.float32)
>>> scatter_nd_add = ops.ScatterNdAdd()
>>> output = scatter_nd_add(input_x, indices, updates)
>>> print(output)
[ 1. 10. 9. 4. 12. 6. 7. 17.]
"""
[docs]class ScatterNdSub(_ScatterNdOp):
r"""
Applies sparse subtraction to individual values or slices in a tensor.
Using given values to update tensor value through the subtraction operation, along with the input indices.
This operation outputs the `input_x` after the update is done, which makes it convenient to use the updated value.
`input_x` has rank P and `indices` has rank Q where `Q >= 2`.
`indices` has shape :math:`(i_0, i_1, ..., i_{Q-2}, N)` where `N <= P`.
The last dimension of `indices` (with length `N` ) indicates slices along the `N` th dimension of `input_x`.
`updates` is a tensor of rank `Q-1+P-N`. Its shape is:
:math:`(i_0, i_1, ..., i_{Q-2}, x\_shape_N, ..., x\_shape_{P-1})`.
Inputs of `input_x` and `updates` comply with the implicit type conversion rules to make the data types consistent.
If they have different data types, lower priority data type will be converted to
relatively highest priority data type.
RuntimeError exception will be thrown when the data type conversion of Parameter is required.
Args:
use_locking (bool): Whether protect the assignment by a lock. Default: False.
Inputs:
- **input_x** (Parameter) - The target parameter.
- **indices** (Tensor) - The index to do add operation whose data type must be mindspore.int32.
The rank of indices must be at least 2 and `indices_shape[-1] <= len(shape)`.
- **updates** (Tensor) - The tensor that performs the subtraction operation with `input_x`,
the data type is the same as `input_x`, the shape is `indices_shape[:-1] + x_shape[indices_shape[-1]:]`.
Outputs:
Parameter, the updated `input_x`.
Raises:
TypeError: If `use_locking` is not a bool.
Supported Platforms:
``Ascend``
Examples:
>>> input_x = Parameter(Tensor(np.array([1, 2, 3, 4, 5, 6, 7, 8]), mindspore.float32), name="x")
>>> indices = Tensor(np.array([[2], [4], [1], [7]]), mindspore.int32)
>>> updates = Tensor(np.array([6, 7, 8, 9]), mindspore.float32)
>>> scatter_nd_sub = ops.ScatterNdSub()
>>> output = scatter_nd_sub(input_x, indices, updates)
>>> print(output)
[ 1. -6. -3. 4. -2. 6. 7. -1.]
"""
[docs]class ScatterNonAliasingAdd(_ScatterNdOp):
"""
Applies sparse addition to the input using individual values or slices.
Using given values to update tensor value through the add operation, along with the input indices.
This operation outputs the `input_x` after the update is done, which makes it convenient to use the updated value.
Inputs of `input_x` and `updates` comply with the implicit type conversion rules to make the data types consistent.
If they have different data types, lower priority data type will be converted to
relatively highest priority data type.
RuntimeError exception will be thrown when the data type conversion of Parameter is required.
Inputs:
- **input_x** (Parameter) - The target parameter. The data type must be float16, float32 or int32.
- **indices** (Tensor) - The index to perform the addition operation whose data type must be mindspore.int32.
- **updates** (Tensor) - The tensor that performs the addition operation with `input_x`,
the data type is the same as `input_x`, the shape is `indices_shape[:-1] + x_shape[indices_shape[-1]:]`.
Outputs:
Parameter, the updated `input_x`.
Raises:
TypeError: If dtype of `indices` is not int32.
TypeError: If dtype of `input_x` is not one of float16, float32, int32.
Supported Platforms:
``Ascend``
Examples:
>>> input_x = Parameter(Tensor(np.array([1, 2, 3, 4, 5, 6, 7, 8]), mindspore.float32), name="x")
>>> indices = Tensor(np.array([[2], [4], [1], [7]]), mindspore.int32)
>>> updates = Tensor(np.array([6, 7, 8, 9]), mindspore.float32)
>>> scatter_non_aliasing_add = ops.ScatterNonAliasingAdd()
>>> output = scatter_non_aliasing_add(input_x, indices, updates)
>>> print(output)
[ 1. 10. 9. 4. 12. 6. 7. 17.]
"""
@prim_attr_register
def __init__(self):
"""Initialize ScatterNonAliasingAdd"""
self.init_prim_io_names(inputs=['x', 'indices', 'updates'], outputs=['y'])
self.add_prim_attr('side_effect_mem', True)
def infer_dtype(self, x_dtype, indices_dtype, updates_dtype):
validator.check_tensor_dtype_valid('indices', indices_dtype, [mstype.int32], self.name)
args = {"x": x_dtype, "updates": updates_dtype}
validator.check_tensors_dtypes_same_and_valid(args, [mstype.float16, mstype.float32, mstype.int32], self.name)
return x_dtype
[docs]class SpaceToDepth(PrimitiveWithInfer):
r"""
Rearranges blocks of spatial data into depth.
The output tensor's `height` dimension is :math:`height / block\_size`.
The output tensor's `weight` dimension is :math:`weight / block\_size`.
The depth of output tensor is :math:`block\_size * block\_size * input\_depth`.
The input tensor's height and width must be divisible by `block_size`.
The data format is "NCHW".
Args:
block_size (int): The block size used to divide spatial data. It must be >= 2.
Inputs:
- **x** (Tensor) - The target tensor.
Outputs:
Tensor, the same data type as `x`. It must be a 4-D tensor.
Raises:
TypeError: If `block_size` is not an int.
ValueError: If `block_size` is less than 2.
ValueError: If length of shape of `x` is not equal to 4.
Supported Platforms:
``Ascend``
Examples:
>>> x = Tensor(np.random.rand(1,3,2,2), mindspore.float32)
>>> block_size = 2
>>> space_to_depth = ops.SpaceToDepth(block_size)
>>> output = space_to_depth(x)
>>> print(output.shape)
(1, 12, 1, 1)
"""
@prim_attr_register
def __init__(self, block_size):
"""Initialize SpaceToDepth"""
self.init_prim_io_names(inputs=['x'], outputs=['y'])
validator.check_value_type('block_size', block_size, [int], self.name)
validator.check('block_size', block_size, '', 2, Rel.GE)
self.block_size = block_size
self.add_prim_attr("data_format", "NCHW")
def infer_shape(self, x_shape):
validator.check('x dimension', len(x_shape), '', 4, Rel.EQ)
out_shape = copy.deepcopy(x_shape)
for i in range(2):
if out_shape[i + 2] % self.block_size != 0:
raise ValueError(f'For \'{self.name}\' input shape[{i + 2}] {out_shape[i + 2]} should be '
f'fully divided by block_size {self.block_size}')
out_shape[i + 2] //= self.block_size
out_shape[1] *= self.block_size * self.block_size
return out_shape
def infer_dtype(self, x_dtype):
validator.check_subclass("x_dtype", x_dtype, mstype.tensor, self.name)
return x_dtype
[docs]class DepthToSpace(PrimitiveWithInfer):
r"""
Rearranges blocks of depth data into spatial dimensions.
This is the reverse operation of SpaceToDepth.
The depth of output tensor is :math:`input\_depth / (block\_size * block\_size)`.
The output tensor's `height` dimension is :math:`height * block\_size`.
The output tensor's `weight` dimension is :math:`weight * block\_size`.
The input tensor's depth must be divisible by `block_size * block_size`.
The data format is "NCHW".
Args:
block_size (int): The block size used to divide depth data. It must be >= 2.
Inputs:
- **x** (Tensor) - The target tensor. It must be a 4-D tensor with shape :math:`(N, C_{in}, H_{in}, W_{in})`.
Outputs:
Tensor of shape :math:`(N, C_{in} / \text{block_size}, H_{in} * \text{block_size},
W_{in} * \text{block_size})`.
Raises:
TypeError: If `block_size` is not an int.
ValueError: If `block_size` is less than 2.
ValueError: If length of shape of `x` is not equal to 4.
Supported Platforms:
``Ascend``
Examples:
>>> x = Tensor(np.random.rand(1, 12, 1, 1), mindspore.float32)
>>> block_size = 2
>>> depth_to_space = ops.DepthToSpace(block_size)
>>> output = depth_to_space(x)
>>> print(output.shape)
(1, 3, 2, 2)
"""
@prim_attr_register
def __init__(self, block_size):
"""Initialize DepthToSpace"""
self.init_prim_io_names(inputs=['x'], outputs=['y'])
validator.check_value_type('block_size', block_size, [int], self.name)
validator.check('block_size', block_size, '', 2, Rel.GE, self.name)
self.block_size = block_size
self.add_prim_attr("data_format", "NCHW")
def infer_shape(self, x_shape):
validator.check('x dimension', len(x_shape), '', 4, Rel.EQ)
out_shape = copy.deepcopy(x_shape)
for i in range(2):
out_shape[i + 2] *= self.block_size
validator.check_int(x_shape[1] % (self.block_size * self.block_size),
0, Rel.EQ, 'x_shape[1] % (block_size*block_size)', self.name)
out_shape[1] //= self.block_size * self.block_size
return out_shape
def infer_dtype(self, x_dtype):
validator.check_subclass("x_dtype", x_dtype, mstype.tensor, self.name)
return x_dtype
[docs]class SpaceToBatch(PrimitiveWithInfer):
r"""
Divides spatial dimensions into blocks and combines the block size with the original batch.
This operation will divide spatial dimensions (H, W) into blocks with `block_size`, the output tensor's H and W
dimension is the corresponding number of blocks after division. The output tensor's batch dimension is the
product of the original batch and the square of block_size. Before division, the spatial dimensions
of the input are zero padded according to paddings if necessary.
Args:
block_size (int): The block size of dividing blocks with value greater than or euqual to 2.
paddings (Union[tuple, list]): The padding values for H and W dimension, containing 2 subtraction lists.
Each subtraction list contains 2 integer value. All values must be greater than 0.
paddings[i] specifies the paddings for the spatial dimension i, which corresponds to the
input dimension i+2. It is required that input_shape[i+2]+paddings[i][0]+paddings[i][1]
is divisible by block_size.
Inputs:
- **input_x** (Tensor) - The input tensor. It must be a 4-D tensor.
Outputs:
Tensor, the output tensor with the same data type as input. Assume input shape is :math:`(n, c, h, w)` with
:math:`block\_size` and :math:`paddings`. The shape of the output tensor will be :math:`(n', c', h', w')`,
where
:math:`n' = n*(block\_size*block\_size)`
:math:`c' = c`
:math:`h' = (h+paddings[0][0]+paddings[0][1])//block\_size`
:math:`w' = (w+paddings[1][0]+paddings[1][1])//block\_size`
Raises:
TypeError: If `block_size` is not an int.
ValueError: If `block_size` is less than 2.
Supported Platforms:
``Ascend``
Examples:
>>> block_size = 2
>>> paddings = [[0, 0], [0, 0]]
>>> space_to_batch = ops.SpaceToBatch(block_size, paddings)
>>> input_x = Tensor(np.array([[[[1, 2], [3, 4]]]]), mindspore.float32)
>>> output = space_to_batch(input_x)
>>> print(output)
[[[[1.]]]
[[[2.]]]
[[[3.]]]
[[[4.]]]]
"""
@prim_attr_register
def __init__(self, block_size, paddings):
"""Initialize SpaceToBatch"""
logger.warning("WARN_DEPRECATED: The usage of SpaceToBatch is deprecated."
" Please use SpaceToBatchND.")
validator.check_value_type('block_size', block_size, [int], self.name)
validator.check('block_size', block_size, '', 2, Rel.GE, self.name)
self.block_size = block_size
validator.check('paddings shape', np.array(paddings).shape, '', (2, 2), Rel.EQ, self.name)
for elem in itertools.chain(*paddings):
validator.check_non_negative_int(elem, 'paddings element', self.name)
validator.check_value_type('paddings element', elem, [int], self.name)
self.paddings = paddings
def infer_dtype(self, x_dtype):
validator.check_tensor_dtype_valid('input_x', x_dtype, mstype.number_type, self.name)
return x_dtype
def infer_shape(self, x_shape):
validator.check_equal_int(len(x_shape), 4, 'rank of input_x', self.name)
out_shape = copy.deepcopy(x_shape)
for i in range(2):
padded = out_shape[i + 2] + self.paddings[i][0] + self.paddings[i][1]
if padded % self.block_size != 0:
raise ValueError(f'For \'{self.name}\' padded[{i}] {padded} should be divisible by '
f'block_size {self.block_size}')
out_shape[i + 2] = padded // self.block_size
out_shape[0] *= self.block_size * self.block_size
return out_shape
[docs]class BatchToSpace(PrimitiveWithInfer):
r"""
Divides batch dimension with blocks and interleaves these blocks back into spatial dimensions.
This operation will divide batch dimension N into blocks with block_size, the output tensor's N dimension
is the corresponding number of blocks after division. The output tensor's H, W dimension is product of
original H, W dimension and block_size with given amount to crop from dimension, respectively.
Args:
block_size (int): The block size of division, has the value not less than 2.
crops (Union[list(int), tuple(int)]): The crop value for H and W dimension, containing 2 subtraction lists.
Each list contains 2 integers.
All values must be not less than 0. crops[i] specifies the crop values for the spatial dimension i, which
corresponds to the input dimension i+2. It is required that
input_shape[i+2]*block_size >= crops[i][0]+crops[i][1].
Inputs:
- **input_x** (Tensor) - The input tensor. It must be a 4-D tensor, dimension 0 must be divisible by
product of `block_shape`.
Outputs:
Tensor, the output tensor with the same type as input. Assume input shape is (n, c, h, w) with block_size
and crops. The output shape will be (n', c', h', w'), where
:math:`n' = n//(block\_size*block\_size)`
:math:`c' = c`
:math:`h' = h*block\_size-crops[0][0]-crops[0][1]`
:math:`w' = w*block\_size-crops[1][0]-crops[1][1]`
Raises:
TypeError: If `block_size` or element of `crops` is not an int.
TypeError: If `crops` is neither list nor tuple.
ValueError: If `block_size` is less than 2.
Supported Platforms:
``Ascend``
Examples:
>>> block_size = 2
>>> crops = [[0, 0], [0, 0]]
>>> batch_to_space = ops.BatchToSpace(block_size, crops)
>>> input_x = Tensor(np.array([[[[1]]], [[[2]]], [[[3]]], [[[4]]]]), mindspore.float32)
>>> output = batch_to_space(input_x)
>>> print(output)
[[[[1. 2.]
[3. 4.]]]]
"""
@prim_attr_register
def __init__(self, block_size, crops):
"""Initialize BatchToSpace"""
logger.warning("WARN_DEPRECATED: The usage of BatchToSpace is deprecated."
" Please use BatchToSpaceND.")
validator.check_value_type('block_size', block_size, [int], self.name)
validator.check('block_size', block_size, '', 2, Rel.GE, self.name)
self.block_size = block_size
validator.check_value_type('crops type', crops, [list, tuple], self.name)
validator.check('crops shape', np.array(crops).shape, '', (2, 2))
for elem in itertools.chain(*crops):
validator.check_non_negative_int(elem, 'crops element', self.name)
validator.check_value_type('crops element', elem, [int], self.name)
self.crops = crops
def infer_dtype(self, x_dtype):
validator.check_tensor_dtype_valid('input_x', x_dtype, mstype.number_type, self.name)
return x_dtype
def infer_shape(self, x_shape):
validator.check('rank of input_x', len(x_shape), '', 4)
out_shape = copy.deepcopy(x_shape)
for i in range(2):
x_block_prod = out_shape[i + 2] * self.block_size
crops_sum = self.crops[i][0] + self.crops[i][1]
validator.check("x block shape prod", x_block_prod, 'crops sum', crops_sum, Rel.GT, self.name)
out_shape[i + 2] = x_block_prod - crops_sum
block_size_prod = self.block_size * self.block_size
if out_shape[0] % block_size_prod != 0:
raise ValueError(f'For \'{self.name}\' input_x dimension 0 {out_shape[0]} should be divisible by '
f'block_size_prod {block_size_prod}')
out_shape[0] = out_shape[0] // block_size_prod
return out_shape
[docs]class SpaceToBatchND(PrimitiveWithInfer):
r"""
Divides spatial dimensions into blocks and combines the block size with the original batch.
This operation will divide spatial dimensions (H, W) into blocks with block_shape, the output tensor's H and W
dimension is the corresponding number of blocks after division. The output tensor's batch dimension is the
product of the original batch and the product of `block_shape`. Before division,
the spatial dimensions of the input are zero padded according to paddings if necessary.
Args:
block_shape (Union[list(int), tuple(int), int]): The block shape of dividing block with all value greater
than 1. If `block_shape` is a tuple or list, the length of `block_shape` is M corresponding to the
number of spatial dimensions. If `block_shape` is a int, the block size of M dimendions are the same,
equal to `block_shape`. M must be 2.
paddings (Union[tuple, list]): The padding values for H and W dimension, containing 2 subtraction list.
Each contains 2 integer value. All values must be greater than 0.
`paddings[i]` specifies the paddings for the spatial dimension i,
which corresponds to the input dimension i+2.
It is required that input_shape[i+2]+paddings[i][0]+paddings[i][1] is divisible by block_shape[i].
Inputs:
- **input_x** (Tensor) - The input tensor. It must be a 4-D tensor.
Outputs:
Tensor, the output tensor with the same data type as input. Assume input shape is :math:`(n, c, h, w)` with
:math:`block\_shape` and :math:`padddings`. The shape of the output tensor will be :math:`(n', c', h', w')`,
where
:math:`n' = n*(block\_shape[0]*block\_shape[1])`
:math:`c' = c`
:math:`h' = (h+paddings[0][0]+paddings[0][1])//block\_shape[0]`
:math:`w' = (w+paddings[1][0]+paddings[1][1])//block\_shape[1]`
Raises:
TypeError: If `block_shape` is not one of list, tuple, int.
TypeError: If `paddings` is neither list nor tuple.
ValueError: If length of shape of `block_shape` is not equal to 1.
ValueError: If length of `block_shape` or `paddings` is not equal to 2.
Supported Platforms:
``Ascend``
Examples:
>>> block_shape = [2, 2]
>>> paddings = [[0, 0], [0, 0]]
>>> space_to_batch_nd = ops.SpaceToBatchND(block_shape, paddings)
>>> input_x = Tensor(np.array([[[[1, 2], [3, 4]]]]), mindspore.float32)
>>> output = space_to_batch_nd(input_x)
>>> print(output)
[[[[1.]]]
[[[2.]]]
[[[3.]]]
[[[4.]]]]
"""
@prim_attr_register
def __init__(self, block_shape, paddings):
"""Initialize SpaceToBatchND"""
if isinstance(block_shape, int):
block_shape = (block_shape,) * 2
self.add_prim_attr("block_shape", block_shape)
validator.check_value_type('block_shape type', block_shape, [list, tuple], self.name)
validator.check('block_shape shape', len(np.array(block_shape).shape), '', 1, Rel.EQ, self.name)
block_rank = len(block_shape)
validator.check('block_shape length', block_rank, '', 2, Rel.EQ, self.name)
for elem in block_shape:
validator.check('block_shape element', elem, '', 1, Rel.GE, self.name)
validator.check_value_type('block_shape element', elem, [int], self.name)
self.block_shape = block_shape
validator.check_value_type('paddings type', paddings, [list, tuple], self.name)
validator.check('paddings length', len(paddings), '', 2, Rel.EQ, self.name)
validator.check('paddings shape', np.array(paddings).shape, '', (block_rank, 2), Rel.EQ, self.name)
for elem in itertools.chain(*paddings):
validator.check_non_negative_int(elem, 'paddings element', self.name)
validator.check_value_type('paddings element', elem, [int], self.name)
self.paddings = paddings
def infer_dtype(self, x_dtype):
validator.check_tensor_dtype_valid('input_x', x_dtype, mstype.number_type, self.name)
return x_dtype
def infer_shape(self, x_shape):
x_rank = len(x_shape)
validator.check_equal_int(x_rank, 4, 'x_shape rank', self.name)
out_shape = copy.deepcopy(x_shape)
block_shape_prod = 1
offset = 2
for i in range(len(self.block_shape)):
padded = out_shape[i + offset] + self.paddings[i][0] + \
self.paddings[i][1]
if padded % self.block_shape[i] != 0:
raise ValueError(f'For \'{self.name}\' padded[{i}] {padded} should be divisible by '
f'block_shape[{i}] {self.block_shape[i]}')
out_shape[i + offset] = padded // self.block_shape[i]
block_shape_prod = block_shape_prod * self.block_shape[i]
out_shape[0] *= block_shape_prod
return out_shape
[docs]class BatchToSpaceND(PrimitiveWithInfer):
r"""
Divides batch dimension with blocks and interleaves these blocks back into spatial dimensions.
This operation will divide batch dimension N into blocks with block_shape, the output tensor's N dimension
is the corresponding number of blocks after division. The output tensor's H, W dimension is product of
original H, W dimension and block_shape with given amount to crop from dimension, respectively.
Args:
block_shape (Union[list(int), tuple(int), int]): The block shape of dividing block with all value greater
than 1. If `block_shape` is a tuple or list, the length of `block_shape` is M corresponding to the
number of spatial dimensions. If `block_shape` is a int, the block size of M dimendions are the same,
equal to `block_shape`. M must be 2.
crops (Union[list(int), tuple(int)]): The crop value for H and W dimension, containing 2 subtraction list,
each containing 2 int value.
All values must be >= 0. crops[i] specifies the crop values for spatial dimension i, which corresponds to
input dimension i+2. It is required that input_shape[i+2]*block_shape[i] > crops[i][0]+crops[i][1].
Inputs:
- **input_x** (Tensor) - The input tensor. It must be a 4-D tensor, dimension 0 must be divisible by
product of `block_shape`.
Outputs:
Tensor, the output tensor with the same type as input. Assume input shape is (n, c, h, w) with block_shape
and crops. The output shape will be (n', c', h', w'), where
:math:`n' = n//(block\_shape[0]*block\_shape[1])`
:math:`c' = c`
:math:`h' = h*block\_shape[0]-crops[0][0]-crops[0][1]`
:math:`w' = w*block\_shape[1]-crops[1][0]-crops[1][1]`
Raises:
TypeError: If `block_shape` is not one of list, tuple, int.
TypeError: If `crops` is neither list nor tuple.
ValueError: If length of `block_shape` or `crops` is not equal to 2.
Supported Platforms:
``Ascend``
Examples:
>>> block_shape = [2, 2]
>>> crops = [[0, 0], [0, 0]]
>>> batch_to_space_nd = ops.BatchToSpaceND(block_shape, crops)
>>> input_x = Tensor(np.array([[[[1]]], [[[2]]], [[[3]]], [[[4]]]]), mindspore.float32)
>>> output = batch_to_space_nd(input_x)
>>> print(output)
[[[[1. 2.]
[3. 4.]]]]
"""
@prim_attr_register
def __init__(self, block_shape, crops):
"""Initialize BatchToSpaceND"""
if isinstance(block_shape, int):
block_shape = (block_shape,) * 2
self.add_prim_attr("block_shape", block_shape)
validator.check_value_type('block_shape type', block_shape, [list, tuple], self.name)
validator.check('block_shape shape', len(np.array(block_shape).shape), '', 1, Rel.EQ, self.name)
block_rank = len(block_shape)
validator.check('block_shape length', block_rank, '', 2, Rel.EQ, self.name)
for elem in block_shape:
validator.check('block_shape element', elem, '', 1, Rel.GE, self.name)
validator.check_value_type('block_shape element', elem, [int], self.name)
self.block_shape = block_shape
validator.check_value_type('crops type', crops, [list, tuple], self.name)
validator.check('crops length', len(crops), '', 2, Rel.EQ, self.name)
validator.check('crops shape', np.array(crops).shape, '', (block_rank, 2), Rel.EQ, self.name)
for elem in itertools.chain(*crops):
validator.check_non_negative_int(elem, 'crops element', self.name)
validator.check_value_type('crops element', elem, [int], self.name)
self.crops = crops
def infer_dtype(self, x_dtype):
validator.check_tensor_dtype_valid('input_x', x_dtype, mstype.number_type, self.name)
return x_dtype
def infer_shape(self, x_shape):
x_rank = len(x_shape)
validator.check_int(x_rank, 4, Rel.EQ, 'x_shape rank', self.name)
out_shape = copy.deepcopy(x_shape)
block_shape_prod = 1
offset = 2
for i in range(len(self.block_shape)):
block_shape_prod = block_shape_prod * self.block_shape[i]
x_block_prod = out_shape[i + offset] * self.block_shape[i]
crops_sum = self.crops[i][0] + self.crops[i][1]
validator.check("x block shape prod", x_block_prod, 'crops sum', crops_sum, Rel.GT, self.name)
out_shape[i + offset] = x_block_prod - crops_sum
if out_shape[0] % block_shape_prod != 0:
raise ValueError(f'For \'{self.name}\' input_x dimension 0 {out_shape[0]} should be divisible by '
f'block_shape_prod {block_shape_prod}')
out_shape[0] = out_shape[0] // block_shape_prod
return out_shape
[docs]class BroadcastTo(PrimitiveWithInfer):
"""
Broadcasts input tensor to a given shape.
Input shape can be broadcast to target shape if for each dimension pair they are either equal or input is one or
the target dimension is -1. In case of -1 in target shape, it will be replaced by the input shape's value
in that dimension.
When input shape is broadcast to target shape, it starts with the trailing dimensions.
Args:
shape (tuple): The target shape to broadcast. Can be fully specified, or have -1 in one position
where it will be substituted by the input tensor's shape in that position, see example.
Inputs:
- **input_x** (Tensor) - The input tensor. The data type should be one of the following types:
float16, float32, int32, int8, uint8.
Outputs:
Tensor, with the given `shape` and the same data type as `input_x`.
Raises:
TypeError: If `shape` is not a tuple.
ValueError: Given a shape tuple, if it has several -1; or if the -1 is in an invalid position
such as one that does not have a opposing dimension in an input tensor; or if the target and
input shapes are incompatible.
Supported Platforms:
``Ascend`` ``GPU``
Examples:
>>> shape = (2, 3)
>>> input_x = Tensor(np.array([1, 2, 3]).astype(np.float32))
>>> broadcast_to = ops.BroadcastTo(shape)
>>> output = broadcast_to(input_x)
>>> print(output)
[[1. 2. 3.]
[1. 2. 3.]]
>>> shape = (2, -1)
>>> input_x = Tensor(np.array([1, 2, 3]).astype(np.float32))
>>> broadcast_to = ops.BroadcastTo(shape)
>>> output = broadcast_to(input_x)
>>> print(output)
[[1. 2. 3.]
[1. 2. 3.]]
"""
@prim_attr_register
def __init__(self, shape):
"""Initialize BroadcastTo"""
validator.check_value_type("shape", shape, (tuple), self.name)
validator.check("shape length", len(shape), "", 0, Rel.GT, self.name)
for ix, i in enumerate(shape):
validator.check_value_type('target shape index -> ' + str(ix), i, [int], self.name)
validator.check("shape element", i, "shape element min limit", -1, Rel.GE, self.name)
self.shape = shape
if -1 in self.shape:
undef_dims = self.shape.count(-1)
if undef_dims > 1:
raise ValueError(f'The shape can only has one -1 at most, but has {undef_dims}.')
self.dyn = True
else:
self.dyn = False
def infer_shape(self, x_shape):
validator.check("input_x shape length", len(x_shape), "target shape", len(self.shape), Rel.LE, self.name)
target_shape = list(self.shape)
outer_dim_offset = len(target_shape) - len(x_shape)
if self.dyn:
for i, v in enumerate(target_shape):
if v == -1:
if i < outer_dim_offset:
raise ValueError(f" -1 in init shape is in an incompatible location"
f" with given input tensor, -1 index in init shape: {i}"
f" but -1 can only be in index {len(x_shape)} onwards for this input.")
target_shape[i] = x_shape[i - outer_dim_offset]
reversed_x_shape = tuple(reversed(x_shape))
reversed_target = tuple(reversed(target_shape))
for i, v in enumerate(reversed_x_shape):
if v not in (reversed_target[i], 1):
raise ValueError(f"Not supported shapes for broadcast, "
f"x_shape: {tuple(x_shape)}, target shape {target_shape}.")
self.shape = tuple(target_shape)
self.add_prim_attr('shape', self.shape)
return target_shape
def infer_dtype(self, x_dtype):
validator.check_subclass("input_x", x_dtype, mstype.tensor, self.name)
return x_dtype
[docs]class Meshgrid(PrimitiveWithInfer):
"""
Generates coordinate matrices from given coordinate tensors.
Given N one-dimensional coordinate tensors, returns a tuple outputs of N N-D
coordinate tensors for evaluating expressions on an N-D grid.
Args:
indexing (str): Either 'xy' or 'ij'. Default: 'xy'.
When the indexing argument is set to 'xy' (the default), the broadcasting
instructions for the first two dimensions are swapped.
Inputs:
- **input** (Union[tuple]) - A Tuple of N 1-D Tensor objects.
The length of input should be greater than 1
Outputs:
Tensors, A Tuple of N N-D Tensor objects.
Raises:
TypeError: If `indexing` is not a str or `input` is not a tuple.
ValueError: If `indexing` is neither 'xy' nor 'ij'.
Supported Platforms:
``Ascend``
Examples:
>>> x = Tensor(np.array([1, 2, 3, 4]).astype(np.int32))
>>> y = Tensor(np.array([5, 6, 7]).astype(np.int32))
>>> z = Tensor(np.array([8, 9, 0, 1, 2]).astype(np.int32))
>>> inputs = (x, y, z)
>>> meshgrid = ops.Meshgrid(indexing="xy")
>>> output = meshgrid(inputs)
>>> print(output)
(Tensor(shape=[3, 4, 5], dtype=Int32, value=
[[[1, 1, 1, 1, 1],
[2, 2, 2, 2, 2],
[3, 3, 3, 3, 3],
[4, 4, 4, 4, 4]],
[[1, 1, 1, 1, 1],
[2, 2, 2, 2, 2],
[3, 3, 3, 3, 3],
[4, 4, 4, 4, 4]],
[[1, 1, 1, 1, 1],
[2, 2, 2, 2, 2],
[3, 3, 3, 3, 3],
[4, 4, 4, 4, 4]]]),
Tensor(shape=[3, 4, 5], dtype=Int32, value=
[[[5, 5, 5, 5, 5],
[5, 5, 5, 5, 5],
[5, 5, 5, 5, 5],
[5, 5, 5, 5, 5]],
[[6, 6, 6, 6, 6],
[6, 6, 6, 6, 6],
[6, 6, 6, 6, 6],
[6, 6, 6, 6, 6]],
[[7, 7, 7, 7, 7],
[7, 7, 7, 7, 7],
[7, 7, 7, 7, 7],
[7, 7, 7, 7, 7]]]),
Tensor(shape=[3, 4, 5], dtype=Int32, value=
[[[8, 9, 0, 1, 2],
[8, 9, 0, 1, 2],
[8, 9, 0, 1, 2],
[8, 9, 0, 1, 2]],
[[8, 9, 0, 1, 2],
[8, 9, 0, 1, 2],
[8, 9, 0, 1, 2],
[8, 9, 0, 1, 2]],
[[8, 9, 0, 1, 2],
[8, 9, 0, 1, 2],
[8, 9, 0, 1, 2],
[8, 9, 0, 1, 2]]]))
"""
@prim_attr_register
def __init__(self, indexing="xy"):
"""Init Meshgrid"""
validator.check_value_type("indexing", indexing, (str), self.name)
if indexing not in ("xy", "ij"):
raise ValueError("indexing parameter must be either 'xy' or 'ij'")
self.indexing = indexing
def infer_shape(self, x_shape):
validator.check_value_type("shape", x_shape, [tuple], self.name)
validator.check_int(len(x_shape), 2, Rel.GE, "len of input", self.name)
n = len(x_shape)
shape_0 = []
for s in x_shape:
validator.check_int(len(s), 1, Rel.EQ, 'each input rank', self.name)
shape_0.append(s[0])
if self.indexing == "xy":
shape_0[0], shape_0[1] = shape_0[1], shape_0[0]
out_shape = tuple(tuple(shape_0) for _ in range(n))
return out_shape
def infer_dtype(self, x_type):
validator.check_subclass("input[0]", x_type[0], mstype.tensor, self.name)
n = len(x_type)
for i in range(1, n):
validator.check('x_type[%d]' % i, x_type[i], 'base', x_type[0], Rel.EQ, self.name, TypeError)
return x_type
[docs]class InplaceUpdate(PrimitiveWithInfer):
r"""
Updates specified rows with values in `v`.
Args:
indices (Union[int, tuple]): Indices into the left-most dimension of `x`, and determines which rows of x
to update with v. It is a int or tuple, whose value is in [0, the first dimension size of x).
Inputs:
- **x** (Tensor) - A tensor which to be inplace updated. It can be one of the following data types:
float32, float16 and int32.
- **v** (Tensor) - A tensor with the same type as `x` and the same dimension size as `x` except
the first dimension, which must be the same as the size of `indices`.
Outputs:
Tensor, with the same type and shape as the input `x`.
Raises:
TypeError: If `indices` is neither int nor tuple.
TypeError: If `indices` is a tuple and its element is not an int.
Supported Platforms:
``Ascend``
Examples:
>>> indices = (0, 1)
>>> x = Tensor(np.array([[1, 2], [3, 4], [5, 6]]), mindspore.float32)
>>> v = Tensor(np.array([[0.5, 1.0], [1.0, 1.5]]), mindspore.float32)
>>> inplace_update = ops.InplaceUpdate(indices)
>>> output = inplace_update(x, v)
>>> print(output)
[[0.5 1. ]
[1. 1.5]
[5. 6. ]]
"""
@prim_attr_register
def __init__(self, indices):
"""Initialize InplaceUpdate"""
self.init_prim_io_names(inputs=['x', 'v'], outputs=['y'])
self.indices = indices
validator.check_value_type("indices", indices, [int, tuple], self.name)
if isinstance(indices, int):
self.indices = (indices,)
for item in self.indices:
validator.check_value_type("item of indices", item, [int], self.name)
def infer_dtype(self, x_dtype, v_dtype):
args = {'x': x_dtype, 'v': v_dtype}
valid_type = [mstype.int32, mstype.float16, mstype.float32]
validator.check_tensors_dtypes_same_and_valid(args, valid_type, self.name)
return x_dtype
def infer_shape(self, x_shape, v_shape):
validator.check("x", len(x_shape), "v", len(v_shape), Rel.EQ, self.name)
validator.check("size of indices", len(self.indices), "v's first dimension", v_shape[0],
Rel.EQ, self.name)
for i in self.indices:
if i < 0 or i >= x_shape[0]:
raise ValueError(f'The value of indices must be in [0, {x_shape[0]}), but got {i}.')
x_rank = len(x_shape)
for idx in range(x_rank)[1:]:
validator.check('v dim %d' % idx, v_shape[idx], "x dim %d" % idx, x_shape[idx], Rel.EQ, self.name)
return x_shape
[docs]class ReverseSequence(PrimitiveWithInfer):
"""
Reverses variable length slices.
Args:
seq_dim (int): The dimension where reversal is performed. Required.
batch_dim (int): The input is sliced in this dimension. Default: 0.
Inputs:
- **x** (Tensor) - The input to reverse, supporting all number types including bool.
- **seq_lengths** (Tensor) - Must be a 1-D vector with int32 or int64 types.
Outputs:
Reversed tensor with the same shape and data type as input.
Raises:
TypeError: If `seq_dim` or `batch_dim` is not an int.
Supported Platforms:
``Ascend``
Examples:
>>> x = Tensor(np.array([[1, 2, 3], [4, 5, 6], [7, 8, 9]]), mindspore.float32)
>>> seq_lengths = Tensor(np.array([1, 2, 3]))
>>> reverse_sequence = ops.ReverseSequence(seq_dim=1)
>>> output = reverse_sequence(x, seq_lengths)
>>> print(output)
[[1. 2. 3.]
[5. 4. 6.]
[9. 8. 7.]]
"""
@prim_attr_register
def __init__(self, seq_dim, batch_dim=0):
"""Initialize ReverseSequence"""
self.init_prim_io_names(inputs=['x', 'seq_lengths'], outputs=['y'])
validator.check_value_type("seq_dim", seq_dim, [int], self.name)
self.seq_dim_ = seq_dim
validator.check_value_type("batch_dim", batch_dim, [int], self.name)
self.batch_dim_ = batch_dim
def infer_shape(self, x, seq_lengths):
validator.check("seq_dim", self.seq_dim_, "x rank", len(x), Rel.LE, self.name)
validator.check("batch_dim", self.batch_dim_, "x rank", len(x), Rel.LE, self.name)
validator.check("batch_dim", self.batch_dim_, "seq_dim", self.seq_dim_, Rel.NE, self.name)
validator.check("seq_lengths rank", len(seq_lengths), "expected", 1, Rel.EQ, self.name)
validator.check("seq_lengths vector size", seq_lengths[0],
"input size along batch_dim", x[self.batch_dim_], Rel.EQ, self.name)
return x
def infer_dtype(self, x, seq_lengths):
validator.check_tensor_dtype_valid("x_dtype", x, mstype.number_type + (mstype.bool_,), self.name)
validator.check_tensor_dtype_valid("seq_lengths_dtype", seq_lengths, [mstype.int32, mstype.int64], self.name)
return x
[docs]class EditDistance(PrimitiveWithInfer):
"""
Computes the Levenshtein Edit Distance. It is used to measure the similarity of two sequences. The inputs are
variable-length sequences provided by SparseTensors (hypothesis_indices, hypothesis_values, hypothesis_shape)
and (truth_indices, truth_values, truth_shape).
Args:
normalize (bool): If true, edit distances are normalized by length of truth. Default: True.
Inputs:
- **hypothesis_indices** (Tensor) - The indices of the hypothesis list SparseTensor. With int64 data type.
The shape of tensor is :math:`(N, R)`.
- **hypothesis_values** (Tensor) - The values of the hypothesis list SparseTensor.
Must be 1-D vector with length of N.
- **hypothesis_shape** (Tensor) - The shape of the hypothesis list SparseTensor.
Must be R-length vector with int64 data type. Only constant value is allowed.
- **truth_indices** (Tensor) - The indices of the truth list SparseTensor. With int64 data type.
The shape of tensor is :math:`(M, R)`.
- **truth_values** (Tensor) - The values of the truth list SparseTensor. Must be 1-D vector with length of M.
- **truth_shape** (Tensor) - The shape of the truth list SparseTensor.
Must be R-length vector with int64 data type. Only constant value is allowed.
Outputs:
Tensor, a dense tensor with rank `R-1` and float32 data type.
Raises:
TypeError: If `normalize` is not a bool.
Supported Platforms:
``Ascend``
Examples:
>>> import numpy as np
>>> from mindspore import context
>>> from mindspore import Tensor
>>> import mindspore.nn as nn
>>> import mindspore.ops.operations as ops
>>> class EditDistance(nn.Cell):
... def __init__(self, hypothesis_shape, truth_shape, normalize=True):
... super(EditDistance, self).__init__()
... self.edit_distance = ops.EditDistance(normalize)
... self.hypothesis_shape = hypothesis_shape
... self.truth_shape = truth_shape
...
... def construct(self, hypothesis_indices, hypothesis_values, truth_indices, truth_values):
... return self.edit_distance(hypothesis_indices, hypothesis_values, self.hypothesis_shape,
... truth_indices, truth_values, self.truth_shape)
...
>>> hypothesis_indices = Tensor(np.array([[0, 0, 0], [1, 0, 1], [1, 1, 1]]).astype(np.int64))
>>> hypothesis_values = Tensor(np.array([1, 2, 3]).astype(np.float32))
>>> hypothesis_shape = Tensor(np.array([1, 1, 2]).astype(np.int64))
>>> truth_indices = Tensor(np.array([[0, 1, 0], [0, 0, 1], [1, 1, 0], [1, 0, 1]]).astype(np.int64))
>>> truth_values = Tensor(np.array([1, 3, 2, 1]).astype(np.float32))
>>> truth_shape = Tensor(np.array([2, 2, 2]).astype(np.int64))
>>> edit_distance = EditDistance(hypothesis_shape, truth_shape)
>>> output = edit_distance(hypothesis_indices, hypothesis_values, truth_indices, truth_values)
>>> print(output)
[[1. 1.]
[1. 1.]]
"""
@prim_attr_register
def __init__(self, normalize=True):
"""Initialize EditDistance"""
self.normalize = validator.check_value_type("normalize", normalize, [bool], self.name)
self.set_const_input_indexes([2, 5])
def __infer__(self, h_indices, h_values, h_shape, truth_indices, truth_values, truth_shape):
validator.check_const_input('hypothesis_shape', h_shape['value'], self.name)
validator.check_const_input('truth_shape', truth_shape['value'], self.name)
args_int = {"hypothesis_indices": h_indices['dtype'], "hypothesis_shape": h_shape['dtype'],
"truth_indices": truth_indices['dtype'], "truth_shape": truth_shape['dtype']}
validator.check_tensors_dtypes_same_and_valid(args_int, [mstype.int64], self.name)
args = {"hypothesis_values": h_values['dtype'], "truth_values": truth_values['dtype']}
validator.check_tensors_dtypes_same_and_valid(args, mstype.number_type, self.name)
hypothesis_indices_shp, truth_indices_shp = h_indices['shape'], truth_indices['shape']
validator.check("hypothesis_indices rank", len(hypothesis_indices_shp), "expected", 2, Rel.EQ, self.name)
validator.check("truth_indices rank", len(truth_indices_shp), "expected", 2, Rel.EQ, self.name)
validator.check("hypothesis_values rank", len(h_values['shape']), "expected", 1, Rel.EQ, self.name)
validator.check("hypothesis_shape rank", len(h_shape['shape']), "expected", 1, Rel.EQ, self.name)
validator.check("truth_values rank", len(truth_values['shape']), "expected", 1, Rel.EQ, self.name)
validator.check("truth_shape rank", len(truth_shape['shape']), "expected", 1, Rel.EQ, self.name)
validator.check("hypothesis_values shape", h_values['shape'][0],
"hypothesis_indices shape[0]", hypothesis_indices_shp[0], Rel.EQ, self.name)
validator.check("hypothesis_shape", h_shape['shape'][0],
"hypothesis_indices shape[1]", hypothesis_indices_shp[1], Rel.EQ, self.name)
validator.check("truth_values shape", truth_values['shape'][0],
"truth_indices shape[0]", truth_indices_shp[0], Rel.EQ, self.name)
validator.check("hypothesis_shape", h_shape['shape'][0],
"truth_shape", truth_shape['shape'][0], Rel.EQ, self.name)
hypothesis_shape_v = h_shape['value'].asnumpy()
truth_shape_v = truth_shape['value'].asnumpy()
out_shape_rank = len(hypothesis_shape_v) - 1
out_shape = []
for i in range(out_shape_rank):
out_shape.append(max(hypothesis_shape_v[i], truth_shape_v[i]))
return {'shape': tuple(out_shape),
'dtype': mstype.tensor_type(mstype.float32),
'value': None}
class TransShape(PrimitiveWithInfer):
"""
Transforms the shape of input tensor to target shape.
Inputs:
- **input_x** (Tensor) - A input tensor.
- **out_shape** (tuple[int]) - The shape of output data.
Outputs:
Tensor, a tensor whose data type is same as 'input_x', and the shape is the same as the `out_shape`.
"""
@prim_attr_register
def __init__(self):
self.__setattr_flag__ = True
def __infer__(self, x, shape):
shp = shape['value']
dtype = x['dtype']
validator.check_tensor_dtype_valid('x', dtype, mstype.number_type + (mstype.bool_,), self.name)
self.add_prim_attr('out_shape', tuple(shp))
return {'shape': shp,
'dtype': dtype,
'value': None}
[docs]class Sort(PrimitiveWithInfer):
"""
Sorts the elements of the input tensor along a given dimension in ascending order by value.
Args:
axis (int): The dimension to sort along. Default: -1.
descending (bool): Controls the sorting order. If descending is True then the elements
are sorted in descending order by value. Default: False.
Inputs:
- **x** (Tensor) - The input to sort, with float16 or float32 data type.
Outputs:
- **y1** (Tensor) - A tensor whose values are the sorted values, with the same shape and data type as input.
- **y2** (Tensor) - The indices of the elements in the original input tensor. Data type is int32.
Raises:
TypeError: If `axis` is not an int.
TypeError: If `descending` is not a bool.
TypeError: If dtype of `x` is neither float16 nor float32.
Supported Platforms:
``Ascend``
Examples:
>>> x = Tensor(np.array([[8, 2, 1], [5, 9, 3], [4, 6, 7]]), mindspore.float16)
>>> sort = ops.Sort()
>>> output = sort(x)
>>> print(output)
(Tensor(shape=[3, 3], dtype=Float16, value=
[[ 1.0000e+00, 2.0000e+00, 8.0000e+00],
[ 3.0000e+00, 5.0000e+00, 9.0000e+00],
[ 4.0000e+00, 6.0000e+00, 7.0000e+00]]), Tensor(shape=[3, 3], dtype=Int32, value=
[[2, 1, 0],
[2, 0, 1],
[0, 1, 2]]))
"""
@prim_attr_register
def __init__(self, axis=-1, descending=False):
"""Initialize Sort"""
self.axis = validator.check_value_type("axis", axis, [int], self.name)
self.descending = validator.check_value_type("descending", descending, [bool], self.name)
def infer_shape(self, x_shape):
return x_shape, x_shape
def infer_dtype(self, x_dtype):
validator.check_tensor_dtype_valid("x_dtype", x_dtype, [mstype.float32, mstype.float16], self.name)
return x_dtype, mstype.tensor_type(mstype.int32)
[docs]class EmbeddingLookup(PrimitiveWithCheck):
"""
Returns a slice of input tensor based on the specified indices.
This Primitive has the similar functionality as GatherV2 operating on `axis = 0`, but has one more inputs:
`offset`.
Inputs:
- **input_params** (Tensor) - The shape of tensor is :math:`(x_1, x_2, ..., x_R)`.
This represents a Tensor slice, instead of the entire Tensor. Currently, the dimension is restricted to be 2.
- **input_indices** (Tensor) - The shape of tensor is :math:`(y_1, y_2, ..., y_S)`.
Specifies the indices of elements of the original Tensor. Values can be out of range of `input_params`,
and the exceeding part will be filled with 0 in the output. Values does not support negative and the result
is undefined if values are negative.
- **offset** (int) - Specifies the offset value of this `input_params` slice. Thus the real indices
are equal to `input_indices` minus `offset`.
Outputs:
Tensor, the shape of tensor is :math:`(z_1, z_2, ..., z_N)`.
Raises:
TypeError: If dtype of `input_indices` is not int.
ValueError: If length of shape of `input_params` is greater than 2.
Supported Platforms:
``Ascend`` ``CPU``
Examples:
>>> input_params = Tensor(np.array([[8, 9], [10, 11], [12, 13], [14, 15]]), mindspore.float32)
>>> input_indices = Tensor(np.array([[5, 2], [8, 5]]), mindspore.int32)
>>> offset = 4
>>> output = ops.EmbeddingLookup()(input_params, input_indices, offset)
>>> print(output)
[[[10. 11.]
[ 0. 0.]]
[[ 0. 0.]
[10. 11.]]]
"""
@prim_attr_register
def __init__(self):
"""Initialize index_select"""
self.__setattr_flag__ = True
self.init_prim_io_names(inputs=['params', 'indices', 'offset'],
outputs=['output'])
def __check__(self, params, indices, offset):
validator.check_subclass("params", params['dtype'], mstype.tensor, self.name)
validator.check_tensor_dtype_valid("indices", indices['dtype'], mstype.int_type, self.name)
validator.check_subclass("offset", offset['dtype'], mstype.int_, self.name)
params_shp = params['shape']
if len(params_shp) > 2:
raise ValueError("The dimension of 'params' in EmbeddingLookup must <= 2, but got %d." % len(params_shp))
[docs]class GatherD(PrimitiveWithInfer):
"""
Gathers values along an axis specified by dim.
For a 3-D tensor, the output is:
.. code-block::
output[i][j][k] = x[index[i][j][k]][j][k] # if dim == 0
output[i][j][k] = x[i][index[i][j][k]][k] # if dim == 1
output[i][j][k] = x[i][j][index[i][j][k]] # if dim == 2
If `x` is an n-D tensor with shape :math:`(z_0, z_1, ..., z_i, ..., z_{n-1})` and `dim` = i,
the `index` must be an n-D tensor with shape :math:`(z_0, z_1, ..., y, ..., z_{n-1})`
where `y`>=1 and the output will have the same shape as `index`.
Inputs:
- **x** (Tensor) - The source tensor.
- **dim** (int) - The axis along which to index. It must be int32 or int64. Only constant value is allowed.
- **index** (Tensor) - The indices of elements to gather. It can be one of the following data types:
int32, int64. The value range of each index element is [-x_rank[dim], x_rank[dim]).
Outputs:
Tensor, the shape of tensor is :math:`(z_1, z_2, ..., z_N)`.
Raises:
TypeError: If dtype of `dim` or `index` is neither int32 nor int64.
ValueError: If length of shape of `x` is not equal to length of shape of `index`.
Supported Platforms:
``Ascend`` ``GPU`` ``CPU``
Examples:
>>> x = Tensor(np.array([[1, 2], [3, 4]]), mindspore.int32)
>>> index = Tensor(np.array([[0, 0], [1, 0]]), mindspore.int32)
>>> dim = 1
>>> output = ops.GatherD()(x, dim, index)
>>> print(output)
[[1 1]
[4 3]]
"""
@prim_attr_register
def __init__(self):
"""Initialize GatherD"""
self.init_prim_io_names(inputs=['x', 'dim', 'index'], outputs=['output'])
def __infer__(self, x, dim, index):
validator.check_subclass("x", x['dtype'], mstype.tensor, self.name)
validator.check_tensor_dtype_valid("index", index['dtype'], [mstype.int32, mstype.int64], self.name)
validator.check_subclass("dim", dim['dtype'], [mstype.int32, mstype.int64], self.name)
x_shp = x['shape']
idx_shp = index['shape']
x_rank = len(x_shp)
idx_rank = len(idx_shp)
validator.check("x_rank, idx_rank", x_rank, "expected", idx_rank, Rel.EQ, self.name)
dim_v = dim['value']
validator.check("dim value", dim_v, "expected", -x_rank, Rel.GE, self.name)
validator.check("dim value", dim_v, "expected", x_rank, Rel.LT, self.name)
if dim_v < 0:
dim['value'] = dim_v + x_rank
for i in range(x_rank):
if i == dim['value']:
continue
validator.check("x_shp[{0}], idx_shp[{0}]".format(i), x_shp[i], "expected", idx_shp[i], Rel.EQ, self.name)
out = {'shape': index['shape'],
'dtype': x['dtype'],
'value': None}
return out
[docs]class Identity(PrimitiveWithInfer):
"""
Returns a Tensor with the same shape and contents as input.
Inputs:
- **x** (Tensor) - The shape of tensor is :math:`(x_1, x_2, ..., x_R)`.
Outputs:
Tensor, the shape of tensor is the same as `input_x`, :math:`(x_1, x_2, ..., x_R)`.
Raises:
TypeError: If `x` is not a Tensor.
Supported Platforms:
``Ascend``
Examples:
>>> x = Tensor(np.array([1, 2, 3, 4]), mindspore.int64)
>>> output = ops.Identity()(x)
>>> print(output)
[1 2 3 4]
"""
# Side effect is identity with input.
side_effect_propagate = 1
@prim_attr_register
def __init__(self):
"""Initialize identity"""
self.add_prim_attr('side_effect_propagate', 1)
def __infer__(self, x):
validator.check_subclass("x", x['dtype'], mstype.tensor, self.name)
validator.check_tensor_dtype_valid('x', x['dtype'], mstype.number_type + (mstype.bool_,), self.name)
out = {'shape': x['shape'],
'dtype': x['dtype'],
'value': None}
return out
class Range(PrimitiveWithCheck):
r"""
Creates a sequence of numbers that begins at `start` and extends by increments of
`delta` up to but not including `limit`.
The types of all 3 inputs must be the same. The type of the resulting tensor is
the same as the type of the inputs.
Args:
maxlen (int): Memory that can fit `maxlen` many elements
will be allocated for the output. Optional, must be positive, defaults to 1000000.
If the output has more than `maxlen` elements, a runtime error
will occur.
Inputs:
- **start** (Tensor) - A scalar Tensor. The first number in the sequence. Must have
type: int32 or float32
- **limit** (Tensor) - A scalar Tensor. Upper limit of the sequence, exclusive. Must
have type: int32 or float32
- **delta** (Tensor) - A scalar Tensor. Number that increments `start`. Must have
type: int32 or float32
Outputs:
A 1-D Tensor, with the same type as the inputs.
Supported Platforms:
``GPU``
Examples:
>>> start = Tensor(0, mstype.int32)
>>> limit = Tensor(10, mstype.int32)
>>> delta = Tensor(4, mstype.int32)
>>> output = ops.Range()(start, limit, delta)
>>> print(output)
[0, 4, 8]
"""
@prim_attr_register
def __init__(self, maxlen=1000000):
self.init_prim_io_names(inputs=['start', 'limit', 'delta'], outputs=['output'])
validator.check_value_type("maxlen", maxlen, [int], self.name)
validator.check_positive_int(maxlen, "maxlen", self.name)
self.maxlen = maxlen
self.add_prim_attr('maxlen', maxlen)
def check_shape(self, start_shape, limit_shape, delta_shape):
validator.check("start_shape", len(start_shape), "", 0, Rel.EQ, self.name)
validator.check("limit_shape", len(limit_shape), "", 0, Rel.EQ, self.name)
validator.check("delta_shape", len(delta_shape), "", 0, Rel.EQ, self.name)
def check_dtype(self, start_dtype, limit_dtype, delta_dtype):
valid_dtypes = [mstype.int32, mstype.float32]
inputs = {"start": start_dtype, "limit": limit_dtype, "delta": delta_dtype}
validator.check_tensors_dtypes_same_and_valid(inputs, valid_dtypes, self.name)
def infer_value(self, start_value, limit_value, delat_value):
"""Infer the value of input for Range."""
if start_value is not None and limit_value is not None and delat_value is not None:
start = np.asscalar(start_value.asnumpy())
limit = np.asscalar(limit_value.asnumpy())
delat = np.asscalar(delat_value.asnumpy())
return Tensor(np.arange(start, limit, delat), dtype=start_value.dtype)
return None
class MaskedSelect(PrimitiveWithInfer):
"""
Returns a new 1-D Tensor which indexes the input tensor according to the boolean mask.
Inputs:
- **x** (Tensor) - The shape of tensor is :math:`(x_1, x_2, ..., x_R)`.
- **mask** (Tensor) - The shape of tensor is :math:`(x_1, x_2, ..., x_R)`.
Outputs:
Tensor, the shape of tensor is the same as `input_x`, :math:`(x_1, x_2, ..., x_R)`.
Raises:
TypeError: If `x` is not a Tensor.
Supported Platforms:
``Ascend``
Examples:
>>> x = Tensor(np.array([1, 2, 3, 4]), mindspore.int64)
>>> mask = Tensor(np.array([1, 0, 1, 0]), mindspore.bool)
>>> output = ops.MaskedSelect()(x, mask)
>>> print(output)
[1 3]
"""
@prim_attr_register
def __init__(self):
self.init_prim_io_names(inputs=['x', 'mask'], outputs=['output'])
def check_shape(self, x_shape, mask_shape):
get_broadcast_shape(x_shape, mask_shape, self.name)
def check_dtype(self, x_dtype, mask_dtype):
validator.check_tensor_dtype_valid('mask', mask_dtype, [mstype.bool_], self.name)